And what syslog shows before and after?
Can you also help test if country_code=DE is removed?
On 6/13/2014 10:33 PM, reiner otto wrote:
Sorry, dmesg gone, as I am back to 1.0.
From syslog:
Jun 13 13:06:32 localhost vmunix: [ 17.699546] hostapd[2985]: segfault
at 0 ip 080ef64c sp bfbe7b30 error 4 in hostapd[8048000+ff000]
Punky Tse <punky...@punknix.com> schrieb am 16:18 Freitag, 13.Juni 2014:
Can you show to us dmesg where it crash?
On 6/13/2014 9:44 PM, reiner otto wrote:
> No, hostapd 2.1 still segfaults, also with
>
> ieee80211d=1
>
> Back to 1.0 again.
>
>
>
> Kim-man 'Punky' TSE <punky...@punknix.com
<mailto:punky...@punknix.com>> schrieb am 8:25 Montag,
> 9.Juni 2014:
>
>
> Got it. The crash happens when you define country_code=DE, which I
> never do (and I never define country code either).
>
> And workaround is adding ieee80211d=1 to hostapd.conf, e.g.
>
> country_code=DE
> ieee80211d=1
>
> 2.2 is out, let see if new version fixes this.
>
> Regards,
> Punky
>
> On 6/9/2014 1:38 AM, reiner otto wrote:
> > hostapd.conf:
> > interface=wlan0
> > driver=nl80211
> > logger_syslog=-1
> > logger_syslog_level=0
> > logger_stdout=-1
> > logger_stdout_level=2
> > debug=4
> > #dump_file=/tmp/hostapd.dump
> > ctrl_interface=/var/run/hostapd.wlan0
> > ctrl_interface_group=0
> > channel=6
> > hw_mode=g
> > macaddr_acl=0
> > auth_algs=3
> > eapol_key_index_workaround=0
> > eap_server=0
> > wpa=3
> > #ssid=voyage-mpd
> > ssid=xxxxx
> > wpa_passphrase=xyz
> > #wpa_passphrase=voyage-mpd
> > wpa_key_mgmt=WPA-PSK
> > wpa_pairwise=TKIP
> > rsn_pairwise=CCMP
> > #eapol_version=1
> > #wme_enabled=1
> > #ieee80211n=1
> > #ht_capab=[HT40-][HT40+][SHORT-GI-40][TX-STBC][RX-STBC1][DSSS_CCK-40]
> > country_code=DE
> >
> > board: pcengines.ch APU
> > card: http://pcengines.ch/pdf/wle200nx.pdf
> >
> >
> > Punky Tse <punky...@punknix.com <mailto:punky...@punknix.com>
<mailto:punky...@punknix.com <mailto:punky...@punknix.com>>>
> schrieb am 16:18 Sonntag, 8.Juni 2014:
> >
> >
> > On 6/8/2014 2:05 AM, babajaga wrote:
> > > During update/upgrade I got a new version of hostapd from the
> repo. And I got
> > > these segfaults after boot:
> > > https://bbs.archlinux.org/viewtopic.php?id=176814
> > Can you post your hostapd.conf, what is your wirelesss cards and
run on
> > which board? Thanks.
> > > Might be good idea to remove 2.1.
> > Or move forward?
> >
> > --
> >
> > Regards,
> > Kim-man "Punky" Tse
> >
> > * Open Source Embedded Solutions and Systems
> >
> > - Voyage Linux (
> > http://linux.voyage.hk <http://linux.voyage.hk/>
> <http://linux.voyage.hk/><http://linux.voyage.hk/>)
> > - Voyage MPD (http://linux.voyage.hk/voyage-mpd)
> > - Voyage MuBox (http://mubox.voyage.hk <http://mubox.voyage.hk/>
> <http://mubox.voyage.hk/><http://mubox.voyage.hk/>)
> > * Voyage Store (http://store.voyage.hk <http://store.voyage.hk/>
> <http://store.voyage.hk/><http://store.voyage.hk/>
>
> > )
> >
> >
> >
>
>
> --
> Regards,
> Kim-man "Punky" Tse
>
> * Open Source Embedded Solutions and Systems
> - Voyage Linux (http://linux.voyage.hk
<http://linux.voyage.hk/><http://linux.voyage.hk/>)
> - Voyage MPD (http://linux.voyage.hk/voyage-mpd)
> - Voyage MuBox (http://mubox.voyage.hk
<http://mubox.voyage.hk/><http://mubox.voyage.hk/>)
> * Voyage Store (http://store.voyage.hk
<http://store.voyage.hk/><http://store.voyage.hk/>)
>
>
>
--
Regards,
Kim-man "Punky" Tse
* Open Source Embedded Solutions and Systems
- Voyage Linux (http://linux.voyage.hk <http://linux.voyage.hk/>)
- Voyage MPD (http://linux.voyage.hk/voyage-mpd)
- Voyage MuBox (http://mubox.voyage.hk <http://mubox.voyage.hk/>)
* Voyage Store (http://store.voyage.hk <http://store.voyage.hk/>)
--
Regards,
Kim-man "Punky" Tse
* Open Source Embedded Solutions and Systems
- Voyage Linux (http://linux.voyage.hk)
- Voyage MPD (http://linux.voyage.hk/voyage-mpd)
- Voyage MuBox (http://mubox.voyage.hk)
* Voyage Store (http://store.voyage.hk)
_______________________________________________
Voyage-linux mailing list
Voyage-linux@list.voyage.hk
http://list.voyage.hk/mailman/listinfo/voyage-linux
