Attached excerpt from syslog. As 2.2 is out, as you said, testing without DE only makes sense with 2.2, as it looks like, that changing the country settings triggers the segfault. Change in country setting is a MUST to use correct frequencies and TX power.
Punky Tse <punky...@punknix.com> schrieb am 16:42 Freitag, 13.Juni 2014:
And what syslog shows before and after?
Can you also help test if country_code=DE is removed?
On 6/13/2014 10:33 PM, reiner otto wrote:
Sorry, dmesg gone, as I am back to 1.0.
>From syslog:
>Jun 13 13:06:32 localhost vmunix: [ 17.699546] hostapd[2985]: segfault at 0
>ip 080ef64c sp bfbe7b30 error 4 in hostapd[8048000+ff000]
>
>
>
>
>
>Punky Tse <punky...@punknix.com> schrieb am 16:18 Freitag, 13.Juni 2014:
>
>
>
>Can you show to us dmesg where it crash?
>
>On 6/13/2014 9:44 PM, reiner otto wrote:
>> No, hostapd 2.1 still segfaults, also with
>>
>> ieee80211d=1
>>
>> Back to 1.0 again.
>>
>>
>>
>> Kim-man 'Punky' TSE <punky...@punknix.com> schrieb am 8:25 Montag,
>> 9.Juni 2014:
>>
>>
>> Got it. The crash happens when you define
country_code=DE, which I
>> never do (and I never define country code either).
>>
>> And workaround is adding ieee80211d=1 to
hostapd.conf, e.g.
>>
>> country_code=DE
>> ieee80211d=1
>>
>> 2.2 is out, let see if new version fixes this.
>>
>> Regards,
>> Punky
>>
>> On 6/9/2014 1:38 AM, reiner otto wrote:
>> > hostapd.conf:
>> > interface=wlan0
>> > driver=nl80211
>> > logger_syslog=-1
>> > logger_syslog_level=0
>> > logger_stdout=-1
>> > logger_stdout_level=2
>> > debug=4
>> > #dump_file=/tmp/hostapd.dump
>> > ctrl_interface=/var/run/hostapd.wlan0
>> > ctrl_interface_group=0
>> > channel=6
>> > hw_mode=g
>> > macaddr_acl=0
>> > auth_algs=3
>> > eapol_key_index_workaround=0
>> > eap_server=0
>> > wpa=3
>> > #ssid=voyage-mpd
>> > ssid=xxxxx
>> > wpa_passphrase=xyz
>> > #wpa_passphrase=voyage-mpd
>> > wpa_key_mgmt=WPA-PSK
>> > wpa_pairwise=TKIP
>> > rsn_pairwise=CCMP
>> > #eapol_version=1
>> > #wme_enabled=1
>> > #ieee80211n=1
>> >
#ht_capab=[HT40-][HT40+][SHORT-GI-40][TX-STBC][RX-STBC1][DSSS_CCK-40]
>> > country_code=DE
>> >
>> > board: pcengines.ch APU
>> > card: http://pcengines.ch/pdf/wle200nx.pdf
>> >
>> >
>> > Punky Tse <punky...@punknix.com <mailto:punky...@punknix.com>>
>> schrieb am 16:18 Sonntag, 8.Juni 2014:
>> >
>> >
>> > On 6/8/2014 2:05 AM, babajaga wrote:
>> > > During update/upgrade I got a new version
of hostapd from the
>> repo. And I got
>> > > these segfaults after boot:
>> > > https://bbs.archlinux.org/viewtopic.php?id=176814
>> > Can you post your hostapd.conf, what is your
wirelesss cards and run on
>> > which board? Thanks.
>> > > Might be good idea to remove 2.1.
>> > Or move forward?
>> >
>> > --
>> >
>> > Regards,
>> > Kim-man "Punky" Tse
>> >
>> > * Open Source Embedded Solutions and Systems
>> >
>> > - Voyage Linux (
>> > http://linux.voyage.hk
>> <http://linux.voyage.hk/><http://linux.voyage.hk/>)
>> > - Voyage MPD (http://linux.voyage.hk/voyage-mpd)
>> > - Voyage MuBox (http://mubox.voyage.hk
>> <http://mubox.voyage.hk/><http://mubox.voyage.hk/>)
>> > * Voyage Store (http://store.voyage.hk
>> <http://store.voyage.hk/><http://store.voyage.hk/>
>
>>
>> > )
>> >
>> >
>> >
>>
>>
>> --
>> Regards,
>> Kim-man "Punky" Tse
>>
>> * Open Source Embedded Solutions and Systems
>> - Voyage Linux (http://linux.voyage.hk <http://linux.voyage.hk/>)
>> - Voyage MPD (http://linux.voyage.hk/voyage-mpd)
>> - Voyage MuBox (http://mubox.voyage.hk <http://mubox.voyage.hk/>)
>> * Voyage Store (http://store.voyage.hk <http://store.voyage.hk/>)
>>
>>
>>
>
>
>--
>
>Regards,
>Kim-man "Punky" Tse
>
>* Open Source Embedded Solutions and Systems
> - Voyage Linux (http://linux.voyage.hk)
> - Voyage MPD (http://linux.voyage.hk/voyage-mpd)
> - Voyage MuBox (http://mubox.voyage.hk)
>* Voyage Store (http://store.voyage.hk)
>
>
>
>
-- Regards,
Kim-man "Punky" Tse * Open Source Embedded Solutions and Systems - Voyage Linux
(http://linux.voyage.hk) - Voyage MPD (http://linux.voyage.hk/voyage-mpd) -
Voyage MuBox (http://mubox.voyage.hk)
* Voyage Store (http://store.voyage.hk)
segfault_hostapd.rar
Description: Binary data
_______________________________________________ Voyage-linux mailing list Voyage-linux@list.voyage.hk http://list.voyage.hk/mailman/listinfo/voyage-linux
