Hi Tilman, I apologize. When I replied to your post I thought the (FV"G"318) was a typo and that you were indeed working with the same router as me (FV"S"318G). I was wrong. So my advice does not correlate to your problem. and...I see what you mean. I went to http://tools.netgear.com/landing/gui/security/fvg318/simulators/FVG3181_0_33/index.htm and stepped through the simulator for your router's setup and you're right...There's no xauth or mode config options for that router. In that case I do not know if mode config or xauth is necessary for it to work with Shrew. Perhaps someone else in the community can give better advice?
Otherwise, you're left with either finding someone else's posted instructions or trial and error. I'm interested to know if and how you solve the issue. Best Regards, Mike -----Original Message----- From: Tilman <[email protected]> To: [email protected] Sent: Mon, May 31, 2010 4:45 pm Subject: Re: [vpn-help] Netgear FVG318 Mike, thank you for taking the time to reply. I assume the Netgear FVG318 is the heap brother of the FVS318. The FVG318 does neither support mode config nor auth. The admin settings of the FVG318 don't show these options. Is it possible to use the shrew client with a VPN gateway that doesn't have mode onfig and xauth? Tilman --------------------- rom: [email protected] [mailto:[email protected]] ent: Friday, May 14, 2010 7:55 PM o: [email protected]; [email protected] ubject: Re: [vpn-help] Netgear FVG318 Did you ever get a reply? ou MUST use mode config with the shrew client and FVS318. I just set one up his past week. ake sure that the mode config IP address that's assigned is not the same subnet s the VPN router's internal LAN address. or example, if you use 192.168.1.1 as the VPN LAN gateway address, then make ure your assigned IP addresses by mode-config are something like 192.168.2.x You must also use XAUTH. Setting it up was very straightforward. Sorry I can't ecall the steps at the moment but I did read about it in the howto section of he the shrew.net website. Hope this helps! ike ----Original Message----- rom: Tilman <[email protected]> o: [email protected] ent: Wed, May 12, 2010 8:16 am ubject: [vpn-help] Netgear FVG318 hank you very much for providing this VPN client! I have a Netgear FVG318. I hope I have done my homework .. I searched the list archive, there was only one unanswered email about this device. Has some successfully connected to this Netgear gateway? The HowToNetgear article http://www.shrew.net/support/wiki/HowtoNetgear is for other Netgear VPN Gateways that support Mode Config. The FVG318 does not have a Mode Config option. Trying to connect to this gateway the device is logging as final error: Invalid exchange type 6 Google-researching it seems that this message has to do with Mode Config. I found this email from 2006, mentioning how to make sure not to use any Mode Config features with the Shrew Client: http://lists.shrew.net/pipermail/vpn-help/2006-October/000610.html I tried disabling all these, but am still getting the same error message on the gateway. Any advice on how (and if it is possible at all) to connect to the FVG318 would be appreciated! Thanks, Tilman -- GRATIS für alle GMX-Mitglieder: Die maxdome Movie-FLAT! Jetzt freischalten unter http://portal.gmx.net/de/go/maxdome01 _______________________________________________ vpn-help mailing list [email protected] http://lists.shrew.net/mailman/listinfo/vpn-help - RATIS für alle GMX-Mitglieder: Die maxdome Movie-FLAT! etzt freischalten unter http://portal.gmx.net/de/go/maxdome01 ______________________________________________ pn-help mailing list [email protected] ttp://lists.shrew.net/mailman/listinfo/vpn-help
_______________________________________________ vpn-help mailing list [email protected] http://lists.shrew.net/mailman/listinfo/vpn-help
