Use 'virtual adapter' instead of 'existing ...' this solved it once for me mit freundlichen Grüßen Christian Krackowizer Josef-Thorak-Strasse 22 5026 Salzburg Tel. +43-664-3760631 [email protected]
> -----Ursprüngliche Nachricht----- > Von: [email protected] [mailto:vpn-help- > [email protected]] Im Auftrag von Stanislav Datskevich > Gesendet: Donnerstag, 12. Mai 2011 20:31 > An: [email protected] > Betreff: [vpn-help] Inappropriate DNS changing in Win7 > > Problem: > I'm using ShrewSoft VPN Client version 2.1.7 in Windows 7 to connect to > Juniper SRX 210 firewall. The connection is successfully, but vpn client > erases all the DNS-servers in my existing network connection. > DNS-servers are turned back when I disconnect vpn. Now I using a > workaround - I added my DNS-servers manually to vpn config. > > I propose to change the VPN client so that it does not interfere in > setting DNS, if you uncheck "Enable DNS ". > > To reproduce: > Connect from Windows 7 (use manually added DNS-servers on your network > connection) to any Juniper SRX with dial-in vpn using attached config > (or same). > > VPN Client version = 2.1.7 > Windows OS Version = Windows 7 32-bit with service pack 1 > Gateway Make/Model = Juniper SRX 210 > > -- > My ICQ: 6693942 > My Jabber: [email protected] _______________________________________________ vpn-help mailing list [email protected] http://lists.shrew.net/mailman/listinfo/vpn-help
