14.05.2011 13:11, Christian Krackowizer:
Use 'virtual adapter' instead of 'existing ...' this solved it once for me
mit freundlichen Grüßen
Christian Krackowizer
Josef-Thorak-Strasse 22
5026 Salzburg
Tel. +43-664-3760631
[email protected]
-----Ursprüngliche Nachricht-----
Von: [email protected] [mailto:vpn-help-
[email protected]] Im Auftrag von Stanislav Datskevich
Gesendet: Donnerstag, 12. Mai 2011 20:31
An: [email protected]
Betreff: [vpn-help] Inappropriate DNS changing in Win7
Problem:
I'm using ShrewSoft VPN Client version 2.1.7 in Windows 7 to connect to
Juniper SRX 210 firewall. The connection is successfully, but vpn client
erases all the DNS-servers in my existing network connection.
DNS-servers are turned back when I disconnect vpn. Now I using a
workaround - I added my DNS-servers manually to vpn config.
I propose to change the VPN client so that it does not interfere in
setting DNS, if you uncheck "Enable DNS ".
To reproduce:
Connect from Windows 7 (use manually added DNS-servers on your network
connection) to any Juniper SRX with dial-in vpn using attached config
(or same).
VPN Client version = 2.1.7
Windows OS Version = Windows 7 32-bit with service pack 1
Gateway Make/Model = Juniper SRX 210
--
My ICQ: 6693942
My Jabber: [email protected]
_______________________________________________
vpn-help mailing list
[email protected]
http://lists.shrew.net/mailman/listinfo/vpn-help
Unfortunately, it's impossible with Juniper SRX for me.. I tried to
experiment with Juniper config and virtual adapters, but it not succeeded.
If you have working config for Shrew VPN and Juniper SRX, I'll be very
thankful :)
--
My ICQ: 6693942
My Jabber: [email protected]
_______________________________________________
vpn-help mailing list
[email protected]
http://lists.shrew.net/mailman/listinfo/vpn-help
