On 5/12/2011 1:30 PM, Stanislav Datskevich wrote:
Problem:
I'm using ShrewSoft VPN Client version 2.1.7 in Windows 7 to connect to
Juniper SRX 210 firewall. The connection is successfully, but vpn client
erases all the DNS-servers in my existing network connection.
DNS-servers are turned back when I disconnect vpn. Now I using a
workaround - I added my DNS-servers manually to vpn config.
I propose to change the VPN client so that it does not interfere in
setting DNS, if you uncheck "Enable DNS ".
To reproduce:
Connect from Windows 7 (use manually added DNS-servers on your network
connection) to any Juniper SRX with dial-in vpn using attached config
(or same).
VPN Client version = 2.1.7
Windows OS Version = Windows 7 32-bit with service pack 1
Gateway Make/Model = Juniper SRX 210
Looks like your using direct adapter mode. That doesn't get tested as
often. Is your IP address statically configured or are you using DHCP?
I'll a note for checking into this in the todo list.
-Matthew
_______________________________________________
vpn-help mailing list
[email protected]
http://lists.shrew.net/mailman/listinfo/vpn-help
