16.05.2011 22:03, Matthew Grooms пишет:
On 5/12/2011 1:30 PM, Stanislav Datskevich wrote:
Problem:
I'm using ShrewSoft VPN Client version 2.1.7 in Windows 7 to connect to
Juniper SRX 210 firewall. The connection is successfully, but vpn client
erases all the DNS-servers in my existing network connection.
DNS-servers are turned back when I disconnect vpn. Now I using a
workaround - I added my DNS-servers manually to vpn config.
I propose to change the VPN client so that it does not interfere in
setting DNS, if you uncheck "Enable DNS ".
To reproduce:
Connect from Windows 7 (use manually added DNS-servers on your network
connection) to any Juniper SRX with dial-in vpn using attached config
(or same).
VPN Client version = 2.1.7
Windows OS Version = Windows 7 32-bit with service pack 1
Gateway Make/Model = Juniper SRX 210
Looks like your using direct adapter mode. That doesn't get tested as
often. Is your IP address statically configured or are you using DHCP?
I'll a note for checking into this in the todo list.
-Matthew
My address is statically configured.
If you want to reproduce this bug, use Win7, Shrew VPN with attached in
my first message config with any Juniper SRX.
If you haven't one, I can create test dial-in VPN on my juniper for you.
_______________________________________________
vpn-help mailing list
[email protected]
http://lists.shrew.net/mailman/listinfo/vpn-help
