NOTE: This is the remake of a previous email that has been blocked because of its size due to my usage of screen captures. I have replaced the screen captures by the text they were containing.
Hello Alexis & al, Alexis, my previous email was answering your last question (please see below). After manually cleaning-up any remaining traces from the previous installation attempt of the Shrew VPN Client 2.2.2 (i.e.: Registry, ProgramData, Program Files), I have ran again the “vpn-client-2.2.2-release.exe” and here are a few more detailed screen captures: While running the installer, I am seeing the following error screen: Error 0x80070005: Couldn’t install the network component. Possible cause: Access is denied … and then (as if everything went fine), I am getting the following completion dialog: Shrew Soft VPN Client has been installed on your computer. Click Finish to close this wizard. After the installation has been completed and after a reboot, I have captured the following screen that shows that NO virtual Network Adapter had been created: NO virtual Network Adapter … but, as per this other screen capture, the Schrew Soft filter had been installed: Schrew Soft Lightweight Filter is installed to the existing Network Adpaters. Then, when I uninstalled the Shrew VPN Client 2.2.2, I have captured the following error screen: Error 0x80070005: Couldn’t apply the changes after uninstalling vflt. Possible cause: Access is denied I hope the above screen captures will help to figure-out what is going wrong during the installation …. PS: After all the above, I manually cleaned-up any remaining traces from this other installation attempt of the Shrew VPN Client 2.2.2 (i.e.: Registry, ProgramData, Program Files). I wish great holidays to all of you J Jean Lamontagne Senior Software Consultant/ Consultant principal en logiciels ObjeXpert Inc. Home : (514) 363-2820 Cell : (514) 996-2471 MailTo: <mailto:[email protected]> [email protected] From: Jean Lamontagne (ObjeXpert) [mailto:[email protected]] Sent: Wednesday, December 24, 2014 12:02 PM To: '[email protected]' Cc: '[email protected]' Subject: RE: [vpn-help] Failing to install the Shrew VPN Client 2.2.2 on Win8.1 64bits Bonjour Alexis, Thanks very much for your very quick replyJ I was having the Cisco Systems VPN Client 5.0.07.0440 that has been finally removed after a long and painful saga … where, I have been forced to do a Windows 8.1 Update / Repair in order to successfully remove this client. Before that, I was unable to remove it. When I removed-it, right after the Windows 8.1 Update / Repair, I have done so without any kind of error or warnings. I can also confirm that the “DNE/Deterministic Network Enhancement” is NOT anymore listed into the Network Connection configurations. Do you believe there would be some remaining traces somewhere that would prevent the Shrew VPN Client 2.2.2 to install correctly? Have great holidaysJ Jean Lamontagne Senior Software Consultant/ Consultant principal en logiciels ObjeXpert Inc. Home : (514) 363-2820 Cell : (514) 996-2471 MailTo: <mailto:[email protected]> [email protected]
_______________________________________________ vpn-help mailing list [email protected] https://lists.shrew.net/mailman/listinfo/vpn-help
