Well I think figured one part out today. The "Total rain fall since last
reset: x.xx" message is printed before each 3-pack of 31 messages, UNTIL
there is a bucket tip. After that, the rain amount in the 31 message is the
amount of rain since that instance of rtl_433 started.
...
Tuned to 433920000 Hz.
2016-09-27 17:09:16 Acurite 5n1 sensor 0x062C Ch A, Msg 38, Wind 0 kmph /
0.0 mph, 25.4 C 77.7 F 57 % RH
2016-09-27 17:09:16 Acurite 5n1 sensor 0x062C Ch A, Msg 38, Wind 0 kmph /
0.0 mph, 25.4 C 77.7 F 57 % RH
2016-09-27 17:09:16 Acurite 5n1 sensor 0x062C Ch A, Msg 38, Wind 0 kmph /
0.0 mph, 25.4 C 77.7 F 57 % RH
2016-09-27 17:09:34 Acurite 5n1 sensor 0x062C Ch A, Total rain fall since
last reset: 2.00
2016-09-27 17:09:34 Acurite 5n1 sensor 0x062C Ch A, Msg 31, Wind 0 kmph /
0.0 mph 22.5° NNE (14), rain gauge 0.00 in.
2016-09-27 17:09:34 Acurite 5n1 sensor 0x062C Ch A, Msg 31, Wind 0 kmph /
0.0 mph 22.5° NNE (14), rain gauge 0.00 in.
2016-09-27 17:09:34 Acurite 5n1 sensor 0x062C Ch A, Msg 31, Wind 0 kmph /
0.0 mph 22.5° NNE (14), rain gauge 0.00 in.
I started pouring water in here
2016-09-27 17:09:53 Acurite 5n1 sensor 0x062C Ch A, Msg 38, Wind 1 kmph /
0.6 mph, 25.4 C 77.7 F 63 % RH
2016-09-27 17:09:53 Acurite 5n1 sensor 0x062C Ch A, Msg 38, Wind 1 kmph /
0.6 mph, 25.4 C 77.7 F 63 % RH
2016-09-27 17:09:53 Acurite 5n1 sensor 0x062C Ch A, Msg 38, Wind 1 kmph /
0.6 mph, 25.4 C 77.7 F 63 % RH
2016-09-27 17:10:11 Acurite 5n1 sensor 0x062C Ch A, Msg 31, Wind 0 kmph /
0.0 mph 315.0° NW (0), rain gauge 0.18 in.
2016-09-27 17:10:11 Acurite 5n1 sensor 0x062C Ch A, Msg 31, Wind 0 kmph /
0.0 mph 315.0° NW (0), rain gauge 0.18 in.
2016-09-27 17:10:11 Acurite 5n1 sensor 0x062C Ch A, Msg 31, Wind 0 kmph /
0.0 mph 315.0° NW (0), rain gauge 0.18 in.
2016-09-27 17:10:30 Acurite 5n1 sensor 0x062C Ch A, Msg 38, Wind 1 kmph /
0.6 mph, 25.6 C 78.1 F 75 % RH
2016-09-27 17:10:30 Acurite 5n1 sensor 0x062C Ch A, Msg 38, Wind 1 kmph /
0.6 mph, 25.6 C 78.1 F 75 % RH
2016-09-27 17:10:30 Acurite 5n1 sensor 0x062C Ch A, Msg 38, Wind 1 kmph /
0.6 mph, 25.6 C 78.1 F 75 % RH
2016-09-27 17:10:49 Acurite 5n1 sensor 0x062C Ch A, Msg 31, Wind 0 kmph /
0.0 mph 0.0° N (6), rain gauge 0.25 in.
2016-09-27 17:10:49 Acurite 5n1 sensor 0x062C Ch A, Msg 31, Wind 0 kmph /
0.0 mph 0.0° N (6), rain gauge 0.25 in.
2016-09-27 17:10:49 Acurite 5n1 sensor 0x062C Ch A, Msg 31, Wind 0 kmph /
0.0 mph 0.0° N (6), rain gauge 0.25 in.
2016-09-27 17:11:07 Acurite 5n1 sensor 0x062C Ch A, Msg 38, Wind 0 kmph /
0.0 mph, 25.7 C 78.3 F 65 % RH
Dan
On Tuesday, September 27, 2016 at 11:26:52 AM UTC-4, mwall wrote:
>
>
> we also need to figure out for the specific case of acurite sensors
> whether the type 31 message can be trusted (that would be an rtl_* issue)
> or whether we need a different message (i see a separate acurite rain value
> reported from time to time, but i have not tracked down where it is coming
> from).
>
> m
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
