When did it next give a total value? Was it when you stopped pouring water - ie do you get the total when the bucket has not tipped?
On Wednesday, 28 September 2016 02:38:46 UTC+3, Dan Verbus wrote: > Well I think figured one part out today. The "Total rain fall since last > reset: x.xx" message is printed before each 3-pack of 31 messages, UNTIL > there is a bucket tip. After that, the rain amount in the 31 message is the > amount of rain since that instance of rtl_433 started. > > ... > Tuned to 433920000 Hz. > 2016-09-27 17:09:16 Acurite 5n1 sensor 0x062C Ch A, Msg 38, Wind 0 kmph / > 0.0 mph, 25.4 C 77.7 F 57 % RH > 2016-09-27 17:09:16 Acurite 5n1 sensor 0x062C Ch A, Msg 38, Wind 0 kmph / > 0.0 mph, 25.4 C 77.7 F 57 % RH > 2016-09-27 17:09:16 Acurite 5n1 sensor 0x062C Ch A, Msg 38, Wind 0 kmph / > 0.0 mph, 25.4 C 77.7 F 57 % RH > 2016-09-27 17:09:34 Acurite 5n1 sensor 0x062C Ch A, Total rain fall since > last reset: 2.00 > 2016-09-27 17:09:34 Acurite 5n1 sensor 0x062C Ch A, Msg 31, Wind 0 kmph / > 0.0 mph 22.5° NNE (14), rain gauge 0.00 in. > 2016-09-27 17:09:34 Acurite 5n1 sensor 0x062C Ch A, Msg 31, Wind 0 kmph / > 0.0 mph 22.5° NNE (14), rain gauge 0.00 in. > 2016-09-27 17:09:34 Acurite 5n1 sensor 0x062C Ch A, Msg 31, Wind 0 kmph / > 0.0 mph 22.5° NNE (14), rain gauge 0.00 in. > > I started pouring water in here > > 2016-09-27 17:09:53 Acurite 5n1 sensor 0x062C Ch A, Msg 38, Wind 1 kmph / > 0.6 mph, 25.4 C 77.7 F 63 % RH > 2016-09-27 17:09:53 Acurite 5n1 sensor 0x062C Ch A, Msg 38, Wind 1 kmph / > 0.6 mph, 25.4 C 77.7 F 63 % RH > 2016-09-27 17:09:53 Acurite 5n1 sensor 0x062C Ch A, Msg 38, Wind 1 kmph / > 0.6 mph, 25.4 C 77.7 F 63 % RH > 2016-09-27 17:10:11 Acurite 5n1 sensor 0x062C Ch A, Msg 31, Wind 0 kmph / > 0.0 mph 315.0° NW (0), rain gauge 0.18 in. > 2016-09-27 17:10:11 Acurite 5n1 sensor 0x062C Ch A, Msg 31, Wind 0 kmph / > 0.0 mph 315.0° NW (0), rain gauge 0.18 in. > 2016-09-27 17:10:11 Acurite 5n1 sensor 0x062C Ch A, Msg 31, Wind 0 kmph / > 0.0 mph 315.0° NW (0), rain gauge 0.18 in. > 2016-09-27 17:10:30 Acurite 5n1 sensor 0x062C Ch A, Msg 38, Wind 1 kmph / > 0.6 mph, 25.6 C 78.1 F 75 % RH > 2016-09-27 17:10:30 Acurite 5n1 sensor 0x062C Ch A, Msg 38, Wind 1 kmph / > 0.6 mph, 25.6 C 78.1 F 75 % RH > 2016-09-27 17:10:30 Acurite 5n1 sensor 0x062C Ch A, Msg 38, Wind 1 kmph / > 0.6 mph, 25.6 C 78.1 F 75 % RH > 2016-09-27 17:10:49 Acurite 5n1 sensor 0x062C Ch A, Msg 31, Wind 0 kmph / > 0.0 mph 0.0° N (6), rain gauge 0.25 in. > 2016-09-27 17:10:49 Acurite 5n1 sensor 0x062C Ch A, Msg 31, Wind 0 kmph / > 0.0 mph 0.0° N (6), rain gauge 0.25 in. > 2016-09-27 17:10:49 Acurite 5n1 sensor 0x062C Ch A, Msg 31, Wind 0 kmph / > 0.0 mph 0.0° N (6), rain gauge 0.25 in. > 2016-09-27 17:11:07 Acurite 5n1 sensor 0x062C Ch A, Msg 38, Wind 0 kmph / > 0.0 mph, 25.7 C 78.3 F 65 % RH > > Dan > > > On Tuesday, September 27, 2016 at 11:26:52 AM UTC-4, mwall wrote: >> >> >> we also need to figure out for the specific case of acurite sensors >> whether the type 31 message can be trusted (that would be an rtl_* issue) >> or whether we need a different message (i see a separate acurite rain value >> reported from time to time, but i have not tracked down where it is coming >> from). >> >> m >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
