I watched it for a few minutes and it never gave another total value, but I can't say for sure that it never will. I have another dongle, maybe I'll set up another instance of rtl_433 and let it run to see if it ever does.
Dan On Tuesday, September 27, 2016 at 9:33:56 PM UTC-4, Andrew Milner wrote: > > When did it next give a total value? Was it when you stopped pouring > water - ie do you get the total when the bucket has not tipped? > > > On Wednesday, 28 September 2016 02:38:46 UTC+3, Dan Verbus wrote: > >> Well I think figured one part out today. The "Total rain fall since last >> reset: x.xx" message is printed before each 3-pack of 31 messages, UNTIL >> there is a bucket tip. After that, the rain amount in the 31 message is the >> amount of rain since that instance of rtl_433 started. >> >> ... >> Tuned to 433920000 Hz. >> 2016-09-27 17:09:16 Acurite 5n1 sensor 0x062C Ch A, Msg 38, Wind 0 kmph / >> 0.0 mph, 25.4 C 77.7 F 57 % RH >> 2016-09-27 17:09:16 Acurite 5n1 sensor 0x062C Ch A, Msg 38, Wind 0 kmph / >> 0.0 mph, 25.4 C 77.7 F 57 % RH >> 2016-09-27 17:09:16 Acurite 5n1 sensor 0x062C Ch A, Msg 38, Wind 0 kmph / >> 0.0 mph, 25.4 C 77.7 F 57 % RH >> 2016-09-27 17:09:34 Acurite 5n1 sensor 0x062C Ch A, Total rain fall since >> last reset: 2.00 >> 2016-09-27 17:09:34 Acurite 5n1 sensor 0x062C Ch A, Msg 31, Wind 0 kmph / >> 0.0 mph 22.5° NNE (14), rain gauge 0.00 in. >> 2016-09-27 17:09:34 Acurite 5n1 sensor 0x062C Ch A, Msg 31, Wind 0 kmph / >> 0.0 mph 22.5° NNE (14), rain gauge 0.00 in. >> 2016-09-27 17:09:34 Acurite 5n1 sensor 0x062C Ch A, Msg 31, Wind 0 kmph / >> 0.0 mph 22.5° NNE (14), rain gauge 0.00 in. >> >> I started pouring water in here >> >> 2016-09-27 17:09:53 Acurite 5n1 sensor 0x062C Ch A, Msg 38, Wind 1 kmph / >> 0.6 mph, 25.4 C 77.7 F 63 % RH >> 2016-09-27 17:09:53 Acurite 5n1 sensor 0x062C Ch A, Msg 38, Wind 1 kmph / >> 0.6 mph, 25.4 C 77.7 F 63 % RH >> 2016-09-27 17:09:53 Acurite 5n1 sensor 0x062C Ch A, Msg 38, Wind 1 kmph / >> 0.6 mph, 25.4 C 77.7 F 63 % RH >> 2016-09-27 17:10:11 Acurite 5n1 sensor 0x062C Ch A, Msg 31, Wind 0 kmph / >> 0.0 mph 315.0° NW (0), rain gauge 0.18 in. >> 2016-09-27 17:10:11 Acurite 5n1 sensor 0x062C Ch A, Msg 31, Wind 0 kmph / >> 0.0 mph 315.0° NW (0), rain gauge 0.18 in. >> 2016-09-27 17:10:11 Acurite 5n1 sensor 0x062C Ch A, Msg 31, Wind 0 kmph / >> 0.0 mph 315.0° NW (0), rain gauge 0.18 in. >> 2016-09-27 17:10:30 Acurite 5n1 sensor 0x062C Ch A, Msg 38, Wind 1 kmph / >> 0.6 mph, 25.6 C 78.1 F 75 % RH >> 2016-09-27 17:10:30 Acurite 5n1 sensor 0x062C Ch A, Msg 38, Wind 1 kmph / >> 0.6 mph, 25.6 C 78.1 F 75 % RH >> 2016-09-27 17:10:30 Acurite 5n1 sensor 0x062C Ch A, Msg 38, Wind 1 kmph / >> 0.6 mph, 25.6 C 78.1 F 75 % RH >> 2016-09-27 17:10:49 Acurite 5n1 sensor 0x062C Ch A, Msg 31, Wind 0 kmph / >> 0.0 mph 0.0° N (6), rain gauge 0.25 in. >> 2016-09-27 17:10:49 Acurite 5n1 sensor 0x062C Ch A, Msg 31, Wind 0 kmph / >> 0.0 mph 0.0° N (6), rain gauge 0.25 in. >> 2016-09-27 17:10:49 Acurite 5n1 sensor 0x062C Ch A, Msg 31, Wind 0 kmph / >> 0.0 mph 0.0° N (6), rain gauge 0.25 in. >> 2016-09-27 17:11:07 Acurite 5n1 sensor 0x062C Ch A, Msg 38, Wind 0 kmph / >> 0.0 mph, 25.7 C 78.3 F 65 % RH >> >> Dan >> >> >> On Tuesday, September 27, 2016 at 11:26:52 AM UTC-4, mwall wrote: >>> >>> >>> we also need to figure out for the specific case of acurite sensors >>> whether the type 31 message can be trusted (that would be an rtl_* issue) >>> or whether we need a different message (i see a separate acurite rain value >>> reported from time to time, but i have not tracked down where it is coming >>> from). >>> >>> m >>> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
