On Monday, October 3, 2016 at 7:24:52 PM UTC-5, Don l wrote: > > This is part of the /etc/weewx/weewx.conf file. > ********************************* > debug = 1 > > # Root directory of the weewx data file hierarchy for this station > WEEWX_ROOT = / > > # How long to wait before timing out a socket (FTP, HTTP) connection > socket_timeout = 20 > > # Do not modify this. It is used when installing and updating weewx. > version = 3.5.0 > > > ############################################################################## > > wee_debug output will be sent to stdout(console) > > Using configuration file /etc/weewx/weewx.conf > Using database binding 'wx_binding', which is bound to database > 'archive_sqlite' > > System info > cpu cores: 4 > bogomips: 6800.43 > core id: 3 > apicid: 6 > fpu_exception: yes > stepping: 3 > cache_alignment: 64 > clflush size: 64 > microcode: 0x17 > cache size: 6144 KB > cpuid level: 13 > fpu: yes > model name: Intel(R) Core(TM) i5-4670 CPU @ 3.40GHz > siblings: 4 > physical id: 0 > address sizes: 39 bits physical, 48 bits virtual > cpu family: 6 > vendor_id: GenuineIntel > wp: yes > power management: > flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr > pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe > syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good > nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor > ds_cpl vmx smx est tm2 ssse3 fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic > movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm ida > arat xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase > tsc_adjust bmi1 hle avx2 smep bmi2 erms invpcid rtm > cpu MHz: 1042.179 > model: 60 > processor: 3 > initial apicid: 6 > > Operating system: debian 8.6 > Linux One 3.16.0-4-amd64 #1 SMP Debian > 3.16.36-1+deb8u1 (2016-09-03) x86_64 > 1 minute load average: 0.14 > 5 minute load average: 0.10 > 15 minute load average: 0.11 > > General weewx info > Weewx version 3.5.0 detected. > > Station info > Station type: WMR200 > Driver: weewx.drivers.wmr200 > > Driver info > [WMR200] > # This section is for the Oregon Scientific WMR200 > > # The station model, e.g., WMR200, WMR200A, Radio Shack W200 > model = WMR200 > > # The driver to use: > driver = weewx.drivers.wmr200 > > Currently installed extensions > No extensions installed > > Archive info > Database name: weewx.sdb > Table name: archive > Unit system: 1 (US) > First good timestamp: 2016-08-28 23:20:00 CDT (1472444400) > Last good timestamp: 2016-08-28 23:25:00 CDT (1472444700) > Number of records: 1 > weewx (weewx.conf) is set to use an archive interval of 300 seconds. > The station hardware was not interrogated in determining archive > interval. > > Databases configured in weewx.conf > Database name: weewx.sdb > Database driver: weedb.sqlite > > Database name: weewx > Database driver: weedb.mysql > Database host: localhost > > > Parsed and obfuscated weewx.conf > # WEEWX CONFIGURATION FILE > # > # Copyright (c) 2009-2015 Tom Keffer <tkef...@gmail.com> > # See the file LICENSE.txt for your rights. > > > ############################################################################## > > # This section is for general configuration information. > > # Set to 1 for extra debug info, otherwise comment it out or set to zero > debug = 1 > > # Root directory of the weewx data file hierarchy for this station > WEEWX_ROOT = / > > # How long to wait before timing out a socket (FTP, HTTP) connection > socket_timeout = 20 > > # Do not modify this. It is used when installing and updating weewx. > version = 3.5.0 > > > ############################################################################## > > # This section is for information about the station. > > [Station] > > # Description of the station location > location = "Waldron, Ar" > > # Latitude and longitude in decimal degrees > latitude = 34.90 > longitude = -93.99 > > # Altitude of the station, with unit it is in. This is downloaded from > # from the station if the hardware supports it. > altitude = 754, foot > > # Set to type of station hardware. There must be a corresponding stanza > # in this file with a 'driver' parameter indicating the driver to be > used. > station_type = XXX obfuscated by wee_debug XXX > > # If you have a website, you may specify an URL > #station_url = http://www.example.com > > # The start of the rain year (1=January; 10=October, etc.). This is > # downloaded from the station if the hardware supports it. > rain_year_start = 1 > > # Start of week (0=Monday, 6=Sunday) > week_start = 6 > > > ############################################################################## > > [Simulator] > # This section is for the weewx weather station simulator > > # The time (in seconds) between LOOP packets. > loop_interval = 2.5 > > > ############################################################################## > > [WMR200] > # This section is for the Oregon Scientific WMR200 > > # The station model, e.g., WMR200, WMR200A, Radio Shack W200 > model = WMR200 > > # The driver to use: > driver = weewx.drivers.wmr200 > > > ############################################################################## > > # This section is for uploading data to Internet sites > > [StdRESTful] > > [[StationRegistry]] > # To register this weather station with weewx, set this to true > register_this_station = false > > [[AWEKAS]] > # This section is for configuring posts to AWEKAS. > > # If you wish to do this, set the option 'enable' to true, > # and specify a username and password. > enable = false > username = XXX obfuscated by wee_debug XXX > password = XXX obfuscated by wee_debug XXX > > [[CWOP]] > # This section is for configuring posts to CWOP. > > # If you wish to do this, set the option 'enable' to true, > # and specify the station ID (e.g., CW1234). > enable = false > station = XXX obfuscated by wee_debug XXX > > # If this is an APRS (radio amateur) station, uncomment > # the following and replace with a passcode (e.g., 12345). > #passcode = replace_me (APRS stations only) > > [[PWSweather]] > # This section is for configuring posts to PWSweather.com. > > # If you wish to do this, set the option 'enable' to true, > # and specify a station and password. > enable = false > station = XXX obfuscated by wee_debug XXX > password = XXX obfuscated by wee_debug XXX > > [[WOW]] > # This section is for configuring posts to WOW. > > # If you wish to do this, set the option 'enable' to true, > # and specify a station and password. > enable = false > station = XXX obfuscated by wee_debug XXX > password = XXX obfuscated by wee_debug XXX > > [[Wunderground]] > # This section is for configuring posts to the Weather Underground. > > # If you wish to do this, set the option 'enable' to true, > # and specify a station (e.g., 'KORHOODR3') and password. > enable = false > station = XXX obfuscated by wee_debug XXX > password = XXX obfuscated by wee_debug XXX > > # Set the following to True to have weewx use the WU "Rapidfire" > # protocol. Not all hardware can support it. See the User's Guide. > rapidfire = False > > > ############################################################################## > > # This section specifies what reports, using which skins, to generate. > > [StdReport] > > # Where the skins reside, relative to WEEWX_ROOT > SKIN_ROOT = /etc/weewx/skins > > # Where the generated reports should go, relative to WEEWX_ROOT > HTML_ROOT = /var/www/weewx > > # The database binding indicates which data should be used in reports. > data_binding = wx_binding > > # Each of the following subsections defines a report that will be run. > > [[StandardReport]] > # See the customizing guide to change the units, plot types and > line > # colors, modify the fonts, display additional sensor data, and > other > # customizations. Many of those changes can be made here by > overriding > # parameters, or by modifying templates within the skin itself. > > # The StandardReport uses the 'Standard' skin, which contains the > # images, templates and plots for the report. > skin = Standard > [[[Units]]] > [[[[Groups]]]] > group_altitude = foot > group_speed2 = mile_per_hour2 > group_pressure = inHg > group_rain = inch > group_rainrate = inch_per_hour > group_temperature = degree_F > group_degree_day = degree_F_day > group_speed = mile_per_hour > > [[FTP]] > # FTP'ing the results to a webserver is treated as just another > report, > # albeit one with an unusual report generator! > skin = Ftp > > # If you wish to use FTP, uncomment and fill out the next four > lines. > #user = replace with the ftp username > #password = replace with the ftp password > #server = replace with the ftp server name, e.g, www.threefools.org > #path = replace with the ftp destination directory (e.g., /weather) > > # Set to True for a secure FTP (SFTP) connection. Not all servers > # support this. > secure_ftp = False > > # To upload files from something other than what HTML_ROOT is set > # to above, specify a different HTML_ROOT here. > #HTML_ROOT = /var/www/weewx > > # Most FTP servers use port 21 > port = 21 > > # Set to 1 to use passive mode, zero for active mode > passive = 1 > > [[RSYNC]] > # rsync'ing to a webserver is treated as just another report > skin = Rsync > > # If you wish to use rsync, you must configure passwordless ssh > using > # public/private key authentication from the user account that > weewx > # runs as to the user account on the remote machine where the files > # will be copied. > # > # The following three lines determine where files will be sent. > #server = replace with the rsync server name, e.g, > www.threefools.org > #path = replace with the rsync destination directory (e.g., > /weather) > #user = replace with the rsync username > > # Rsync can be configured to remove files from the remote server if > # they don't exist under HTML_ROOT locally. USE WITH CAUTION: if > you > # make a mistake in the remote path, you could could > unintentionally > # cause unrelated files to be deleted. Set to 1 to enable remote > file > # deletion, zero to allow files to accumulate remotely. > delete = 0 > > > ############################################################################## > > # This service acts as a filter, converting the unit system coming from > # the hardware to a unit system in the database. > > [StdConvert] > > # The target_unit affects only the unit system in the database. Once > # chosen it cannot be changed without converting the entire database. > # Modification of target_unit after starting weewx will result in > # corrupt data - the database will contain a mix of US and METRIC data. > # > # The value of target_unit does not affect the unit system for > # reporting - reports can display US, Metric, or any combination of > units. > # > # In most cases, target_unit should be left as the default: US > # > # In particular, those migrating from a standard wview installation > # should use US since that is what the wview database contains. > > # DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING! > target_unit = US # Options are 'US', 'METRICWX', or 'METRIC' > > > ############################################################################## > > # This section can adjust data using calibration expressions. > > [StdCalibrate] > > [[Corrections]] > # For each type, an arbitrary calibration expression can be given. > # It should be in the units defined in the StdConvert section. > # Example: > foo = foo + 0.2 > > > ############################################################################## > > # This section is for quality control checks. If units are not specified, > # values must be in the units defined in the StdConvert section. > > [StdQC] > > [[MinMax]] > barometer = 26, 32.5, inHg > outTemp = -40, 120, degree_F > inTemp = 10, 120, degree_F > outHumidity = 0, 100 > inHumidity = 0, 100 > windSpeed = 0, 120, mile_per_hour > pressure = 24, 34.5, inHg > > > ############################################################################## > > # This section controls the origin of derived values. > > [StdWXCalculate] > # Derived quantities are calculated by this service. Possible values > are: > # hardware - use the value provided by hardware > # software - use the value calculated by weewx > # prefer_hardware - use value provide by hardware if available, > # otherwise use value calculated by weewx > > pressure = prefer_hardware > barometer = prefer_hardware > altimeter = prefer_hardware > windchill = hardware > heatindex = prefer_hardware > dewpoint = prefer_hardware > inDewpoint = prefer_hardware > rainRate = hardware > > > ############################################################################## > > # For hardware that supports it, this section controls how often the > # onboard clock gets updated. > > [StdTimeSynch] > > # How often to check the weather station clock for drift (in seconds) > clock_check = 14400 > > # How much it can drift before we will correct it (in seconds) > max_drift = 5 > > > ############################################################################## > > # This section is for configuring the archive service. > > [StdArchive] > > # If the station hardware supports data logging then the archive > interval > # will be downloaded from the station. Otherwise, specify it (in > seconds). > archive_interval = 300 > > # How long to wait (in seconds) before processing new archive data. > Must > # be greater than zero. > archive_delay = 15 > > # If possible, new archive records are downloaded from the station > # hardware. If the hardware does not support this, then new archive > # records will be generated in software. > # Set the following to "software" to force software record generation. > record_generation = hardware > > # Whether to include LOOP data in hi/low statistics > loop_hilo = True > > # The data binding used to save archive records > data_binding = wx_binding > > > ############################################################################## > > # This section binds a data store to a database. > > [DataBindings] > > [[wx_binding]] > # The database must match one of the sections in [Databases]. > # This is likely to be the only option you would want to change. > database = archive_sqlite > # The name of the table within the database > table_name = archive > # The manager handles aggregation of data for historical summaries > manager = weewx.wxmanager.WXDaySummaryManager > # The schema defines the structure of the database. > # It is *only* used when the database is created. > schema = schemas.wview.schema > > > ############################################################################## > > # This section defines various databases. > > [Databases] > > # A SQLite database is simply a single file > [[archive_sqlite]] > database_type = SQLite > database_name = weewx.sdb > > # MySQL > [[archive_mysql]] > database_type = MySQL > database_name = weewx > > > ############################################################################## > > # This section defines defaults for the different types of databases. > > [DatabaseTypes] > > # Defaults for SQLite databases > [[SQLite]] > driver = weedb.sqlite > # Directory in which the database files are located > SQLITE_ROOT = /var/lib/weewx > > # Defaults for MySQL databases > [[MySQL]] > driver = weedb.mysql > # The host where the database is located > host = localhost > # The user name for logging in to the host > user = XXX obfuscated by wee_debug XXX > # The password for the user name > password = XXX obfuscated by wee_debug XXX > > > ############################################################################## > > # This section configures the internal weewx engine. > > [Engine] > > [[Services]] > # This section specifies the services that should be run. They are > # grouped by type, and the order of services within each group > # determines the order in which the services will be run. > prep_services = weewx.engine.StdTimeSynch > data_services = , > process_services = weewx.engine.StdConvert, > weewx.engine.StdCalibrate, weewx.engine.StdQC, > weewx.wxservices.StdWXCalculate > archive_services = weewx.engine.StdArchive > restful_services = weewx.restx.StdStationRegistry, > weewx.restx.StdWunderground, weewx.restx.StdPWSweather, > weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS > report_services = weewx.engine.StdPrint, weewx.engine.StdReport > > wee_debug report successfully generated > don@One:/var/tmp$ ls > kdecache-don sudoers.swp > > systemd-private-be6a6f92aa214517be50376c8b2aed87-cups.service-jYGuqz > kdecache-kdm > systemd-private-be6a6f92aa214517be50376c8b2aed87-colord.service-A3sk6k > systemd-private-be6a6f92aa214517be50376c8b2aed87-rtkit-daemon.service-pD6z0C > don@One:/var/tmp$ > > # This section is for information about the station. > > [Station] > > # Description of the station location > location = "Waldron, Ar" > > # Latitude and longitude in decimal degrees > latitude = 34.90 > longitude = -93.99 > > # Altitude of the station, with unit it is in. This is downloaded from > # from the station if the hardware supports it. > altitude = 754, foot > > # Set to type of station hardware. There must be a corresponding stanza > # in this file with a 'driver' parameter indicating the driver to be > used. > station_type = WMR200 > > # If you have a website, you may specify an URL > #station_url = http://www.example.com > > # The start of the rain year (1=January; 10=October, etc.). This is > # downloaded from the station if the hardware supports it. > rain_year_start = 1 > > # Start of week (0=Monday, 6=Sunday) > week_start = 6 > ********************************************* > > This is the /var/log/weewx.log file since I did the edits earlier. > Oct 3 16:43:17 One wee_reports[23502]: reportengine: Running report RSYNC > Oct 3 16:43:17 One wee_reports[23502]: reportengine: Found configuration > file /etc/weewx/skins/Rsync/skin.conf for report RSYNC > Oct 3 16:43:17 One wee_reports[23502]: reportengine: rsync upload not > requested. Skipped. > Oct 3 16:43:47 One wee_reports[23507]: reportengine: Running reports for > latest time in the database. > Oct 3 16:43:47 One wee_reports[23507]: reportengine: Running report > StandardReport > Oct 3 16:43:47 One wee_reports[23507]: reportengine: Found configuration > file /etc/weewx/skins/Standard/skin.conf for report StandardReport > Oct 3 16:43:48 One wee_reports[23507]: units: Unable to convert from feet > to meter > Oct 3 16:43:48 One wee_reports[23507]: reportengine: Caught unrecoverable > exception in generator weewx.cheetahgenerator.CheetahGenerator > Oct 3 16:43:48 One wee_reports[23507]: **** 'feet' > Oct 3 16:43:48 One wee_reports[23507]: **** Traceback (most > recent call last): > Oct 3 16:43:48 One wee_reports[23507]: **** File > "/usr/share/weewx/weewx/reportengine.py", line 140, in run > Oct 3 16:43:48 One wee_reports[23507]: **** obj.start() > Oct 3 16:43:48 One wee_reports[23507]: **** File > "/usr/share/weewx/weewx/reportengine.py", line 170, in start > Oct 3 16:43:48 One wee_reports[23507]: **** self.run() > Oct 3 16:43:48 One wee_reports[23507]: **** File > "/usr/share/weewx/weewx/cheetahgenerator.py", line 140, in run > Oct 3 16:43:48 One wee_reports[23507]: **** > self.initExtensions(gen_dict[option_section_name]) > Oct 3 16:43:48 One wee_reports[23507]: **** File > "/usr/share/weewx/weewx/cheetahgenerator.py", line 177, in initExtensions > Oct 3 16:43:48 One wee_reports[23507]: **** > self.search_list_objs.append(class_(self)) > Oct 3 16:43:48 One wee_reports[23507]: **** File > "/usr/share/weewx/weewx/cheetahgenerator.py", line 455, in __init__ > Oct 3 16:43:48 One wee_reports[23507]: **** altitude_vt = > weewx.units.convert(generator.stn_info.altitude_vt, "meter") > Oct 3 16:43:48 One wee_reports[23507]: **** File > "/usr/share/weewx/weewx/units.py", line 1054, in convert > Oct 3 16:43:48 One wee_reports[23507]: **** conversion_func > = conversionDict[val_t[1]][target_unit_type] > Oct 3 16:43:48 One wee_reports[23507]: **** KeyError: 'feet' > Oct 3 16:43:48 One wee_reports[23507]: **** Generator > terminated... > Oct 3 16:43:48 One wee_reports[23507]: genimages: Generated 12 images for > StandardReport in 0.08 seconds > Oct 3 16:43:48 One wee_reports[23507]: reportengine: Caught unrecoverable > exception in generator weewx.reportengine.CopyGenerator > Oct 3 16:43:48 One wee_reports[23507]: **** [Errno 13] > Permission denied: '/var/www/weewx/backgrounds/band.gif' > Oct 3 16:43:48 One wee_reports[23507]: **** Traceback (most > recent call last): > Oct 3 16:43:48 One wee_reports[23507]: **** File > "/usr/share/weewx/weewx/reportengine.py", line 140, in run > Oct 3 16:43:48 One wee_reports[23507]: **** obj.start() > Oct 3 16:43:48 One wee_reports[23507]: **** File > "/usr/share/weewx/weewx/reportengine.py", line 170, in start > Oct 3 16:43:48 One wee_reports[23507]: **** self.run() > Oct 3 16:43:48 One wee_reports[23507]: **** File > "/usr/share/weewx/weewx/reportengine.py", line 326, in run > Oct 3 16:43:48 One wee_reports[23507]: **** > shutil.copy(_file, dest_dir) > Oct 3 16:43:48 One wee_reports[23507]: **** File > "/usr/lib/python2.7/shutil.py", line 119, in copy > Oct 3 16:43:48 One wee_reports[23507]: **** copyfile(src, > dst) > Oct 3 16:43:48 One wee_reports[23507]: **** File > "/usr/lib/python2.7/shutil.py", line 83, in copyfile > Oct 3 16:43:48 One wee_reports[23507]: **** with open(dst, > 'wb') as fdst: > Oct 3 16:43:48 One wee_reports[23507]: **** IOError: [Errno 13] > Permission denied: '/var/www/weewx/backgrounds/band.gif' > Oct 3 16:43:48 One wee_reports[23507]: **** Generator > terminated... > Oct 3 16:43:48 One wee_reports[23507]: reportengine: Running report FTP > Oct 3 16:43:48 One wee_reports[23507]: reportengine: Found configuration > file /etc/weewx/skins/Ftp/skin.conf for report FTP > Oct 3 16:43:48 One wee_reports[23507]: reportengine: FTP upload not > requested. Skipped. > Oct 3 16:43:48 One wee_reports[23507]: reportengine: Running report RSYNC > Oct 3 16:43:48 One wee_reports[23507]: reportengine: Found configuration > file /etc/weewx/skins/Rsync/skin.conf for report RSYNC > Oct 3 16:43:48 One wee_reports[23507]: reportengine: rsync upload not > requested. Skipped. > Oct 3 16:49:31 One weewx[23541]: Stopping weewx weather system: > weewx........................ failed! > Oct 3 16:52:54 One weewx[23846]: Starting weewx weather system: weewx > already running.... > > ********************************************************* > Moved to /var/tmp/ and run wee_debug --info > lots of output generated. expected to find a file in var tmp but no. last > line says report generated but not where it put it. Where is it supposed > to be? > Don > > ---------------------------------------------------Adding more I did a copy of the debug output here. -----------------------------
wee_debug output will be sent to stdout(console) Using configuration file /etc/weewx/weewx.conf Using database binding 'wx_binding', which is bound to database 'archive_sqlite' System info cpu cores: 4 bogomips: 6800.43 core id: 3 apicid: 6 fpu_exception: yes stepping: 3 cache_alignment: 64 clflush size: 64 microcode: 0x17 cache size: 6144 KB cpuid level: 13 fpu: yes model name: Intel(R) Core(TM) i5-4670 CPU @ 3.40GHz siblings: 4 physical id: 0 address sizes: 39 bits physical, 48 bits virtual cpu family: 6 vendor_id: GenuineIntel wp: yes power management: flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm ida arat xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 erms invpcid rtm cpu MHz: 1042.179 model: 60 processor: 3 initial apicid: 6 Operating system: debian 8.6 Linux One 3.16.0-4-amd64 #1 SMP Debian 3.16.36-1+deb8u1 (2016-09-03) x86_64 1 minute load average: 0.14 5 minute load average: 0.10 15 minute load average: 0.11 General weewx info Weewx version 3.5.0 detected. Station info Station type: WMR200 Driver: weewx.drivers.wmr200 Driver info [WMR200] # This section is for the Oregon Scientific WMR200 # The station model, e.g., WMR200, WMR200A, Radio Shack W200 model = WMR200 # The driver to use: driver = weewx.drivers.wmr200 Currently installed extensions No extensions installed Archive info Database name: weewx.sdb Table name: archive Unit system: 1 (US) First good timestamp: 2016-08-28 23:20:00 CDT (1472444400) Last good timestamp: 2016-08-28 23:25:00 CDT (1472444700) Number of records: 1 weewx (weewx.conf) is set to use an archive interval of 300 seconds. The station hardware was not interrogated in determining archive interval. Databases configured in weewx.conf Database name: weewx.sdb Database driver: weedb.sqlite Database name: weewx Database driver: weedb.mysql Database host: localhost Parsed and obfuscated weewx.conf # WEEWX CONFIGURATION FILE # # Copyright (c) 2009-2015 Tom Keffer <tkef...@gmail.com> # See the file LICENSE.txt for your rights. ############################################################################## # This section is for general configuration information. # Set to 1 for extra debug info, otherwise comment it out or set to zero debug = 1 # Root directory of the weewx data file hierarchy for this station WEEWX_ROOT = / # How long to wait before timing out a socket (FTP, HTTP) connection socket_timeout = 20 # Do not modify this. It is used when installing and updating weewx. version = 3.5.0 ############################################################################## # This section is for information about the station. [Station] # Description of the station location location = "Waldron, Ar" # Latitude and longitude in decimal degrees latitude = 34.90 longitude = -93.99 # Altitude of the station, with unit it is in. This is downloaded from # from the station if the hardware supports it. altitude = 754, foot # Set to type of station hardware. There must be a corresponding stanza # in this file with a 'driver' parameter indicating the driver to be used. station_type = XXX obfuscated by wee_debug XXX # If you have a website, you may specify an URL #station_url = http://www.example.com # The start of the rain year (1=January; 10=October, etc.). This is # downloaded from the station if the hardware supports it. rain_year_start = 1 # Start of week (0=Monday, 6=Sunday) week_start = 6 ############################################################################## [Simulator] # This section is for the weewx weather station simulator # The time (in seconds) between LOOP packets. loop_interval = 2.5 ############################################################################## [WMR200] # This section is for the Oregon Scientific WMR200 # The station model, e.g., WMR200, WMR200A, Radio Shack W200 model = WMR200 # The driver to use: driver = weewx.drivers.wmr200 ############################################################################## # This section is for uploading data to Internet sites [StdRESTful] [[StationRegistry]] # To register this weather station with weewx, set this to true register_this_station = false [[AWEKAS]] # This section is for configuring posts to AWEKAS. # If you wish to do this, set the option 'enable' to true, # and specify a username and password. enable = false username = XXX obfuscated by wee_debug XXX password = XXX obfuscated by wee_debug XXX [[CWOP]] # This section is for configuring posts to CWOP. # If you wish to do this, set the option 'enable' to true, # and specify the station ID (e.g., CW1234). enable = false station = XXX obfuscated by wee_debug XXX # If this is an APRS (radio amateur) station, uncomment # the following and replace with a passcode (e.g., 12345). #passcode = replace_me (APRS stations only) [[PWSweather]] # This section is for configuring posts to PWSweather.com. # If you wish to do this, set the option 'enable' to true, # and specify a station and password. enable = false station = XXX obfuscated by wee_debug XXX password = XXX obfuscated by wee_debug XXX [[WOW]] # This section is for configuring posts to WOW. # If you wish to do this, set the option 'enable' to true, # and specify a station and password. enable = false station = XXX obfuscated by wee_debug XXX password = XXX obfuscated by wee_debug XXX [[Wunderground]] # This section is for configuring posts to the Weather Underground. # If you wish to do this, set the option 'enable' to true, # and specify a station (e.g., 'KORHOODR3') and password. enable = false station = XXX obfuscated by wee_debug XXX password = XXX obfuscated by wee_debug XXX # Set the following to True to have weewx use the WU "Rapidfire" # protocol. Not all hardware can support it. See the User's Guide. rapidfire = False ############################################################################## # This section specifies what reports, using which skins, to generate. [StdReport] # Where the skins reside, relative to WEEWX_ROOT SKIN_ROOT = /etc/weewx/skins # Where the generated reports should go, relative to WEEWX_ROOT HTML_ROOT = /var/www/weewx # The database binding indicates which data should be used in reports. data_binding = wx_binding # Each of the following subsections defines a report that will be run. [[StandardReport]] # See the customizing guide to change the units, plot types and line # colors, modify the fonts, display additional sensor data, and other # customizations. Many of those changes can be made here by overriding # parameters, or by modifying templates within the skin itself. # The StandardReport uses the 'Standard' skin, which contains the # images, templates and plots for the report. skin = Standard [[[Units]]] [[[[Groups]]]] group_altitude = foot group_speed2 = mile_per_hour2 group_pressure = inHg group_rain = inch group_rainrate = inch_per_hour group_temperature = degree_F group_degree_day = degree_F_day group_speed = mile_per_hour [[FTP]] # FTP'ing the results to a webserver is treated as just another report, # albeit one with an unusual report generator! skin = Ftp # If you wish to use FTP, uncomment and fill out the next four lines. #user = replace with the ftp username #password = replace with the ftp password #server = replace with the ftp server name, e.g, www.threefools.org #path = replace with the ftp destination directory (e.g., /weather) # Set to True for a secure FTP (SFTP) connection. Not all servers # support this. secure_ftp = False # To upload files from something other than what HTML_ROOT is set # to above, specify a different HTML_ROOT here. #HTML_ROOT = /var/www/weewx # Most FTP servers use port 21 port = 21 # Set to 1 to use passive mode, zero for active mode passive = 1 [[RSYNC]] # rsync'ing to a webserver is treated as just another report skin = Rsync # If you wish to use rsync, you must configure passwordless ssh using # public/private key authentication from the user account that weewx # runs as to the user account on the remote machine where the files # will be copied. # # The following three lines determine where files will be sent. #server = replace with the rsync server name, e.g, www.threefools.org #path = replace with the rsync destination directory (e.g., /weather) #user = replace with the rsync username # Rsync can be configured to remove files from the remote server if # they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you # make a mistake in the remote path, you could could unintentionally # cause unrelated files to be deleted. Set to 1 to enable remote file # deletion, zero to allow files to accumulate remotely. delete = 0 ############################################################################## # This service acts as a filter, converting the unit system coming from # the hardware to a unit system in the database. [StdConvert] # The target_unit affects only the unit system in the database. Once # chosen it cannot be changed without converting the entire database. # Modification of target_unit after starting weewx will result in # corrupt data - the database will contain a mix of US and METRIC data. # # The value of target_unit does not affect the unit system for # reporting - reports can display US, Metric, or any combination of units. # # In most cases, target_unit should be left as the default: US # # In particular, those migrating from a standard wview installation # should use US since that is what the wview database contains. # DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING! target_unit = US # Options are 'US', 'METRICWX', or 'METRIC' ############################################################################## # This section can adjust data using calibration expressions. [StdCalibrate] [[Corrections]] # For each type, an arbitrary calibration expression can be given. # It should be in the units defined in the StdConvert section. # Example: foo = foo + 0.2 ############################################################################## # This section is for quality control checks. If units are not specified, # values must be in the units defined in the StdConvert section. [StdQC] [[MinMax]] barometer = 26, 32.5, inHg outTemp = -40, 120, degree_F inTemp = 10, 120, degree_F outHumidity = 0, 100 inHumidity = 0, 100 windSpeed = 0, 120, mile_per_hour pressure = 24, 34.5, inHg ############################################################################## # This section controls the origin of derived values. [StdWXCalculate] # Derived quantities are calculated by this service. Possible values are: # hardware - use the value provided by hardware # software - use the value calculated by weewx # prefer_hardware - use value provide by hardware if available, # otherwise use value calculated by weewx pressure = prefer_hardware barometer = prefer_hardware altimeter = prefer_hardware windchill = hardware heatindex = prefer_hardware dewpoint = prefer_hardware inDewpoint = prefer_hardware rainRate = hardware ############################################################################## # For hardware that supports it, this section controls how often the # onboard clock gets updated. [StdTimeSynch] # How often to check the weather station clock for drift (in seconds) clock_check = 14400 # How much it can drift before we will correct it (in seconds) max_drift = 5 ############################################################################## # This section is for configuring the archive service. [StdArchive] # If the station hardware supports data logging then the archive interval # will be downloaded from the station. Otherwise, specify it (in seconds). archive_interval = 300 # How long to wait (in seconds) before processing new archive data. Must # be greater than zero. archive_delay = 15 # If possible, new archive records are downloaded from the station # hardware. If the hardware does not support this, then new archive # records will be generated in software. # Set the following to "software" to force software record generation. record_generation = hardware # Whether to include LOOP data in hi/low statistics loop_hilo = True # The data binding used to save archive records data_binding = wx_binding ############################################################################## # This section binds a data store to a database. [DataBindings] [[wx_binding]] # The database must match one of the sections in [Databases]. # This is likely to be the only option you would want to change. database = archive_sqlite # The name of the table within the database table_name = archive # The manager handles aggregation of data for historical summaries manager = weewx.wxmanager.WXDaySummaryManager # The schema defines the structure of the database. # It is *only* used when the database is created. schema = schemas.wview.schema ############################################################################## # This section defines various databases. [Databases] # A SQLite database is simply a single file [[archive_sqlite]] database_type = SQLite database_name = weewx.sdb # MySQL [[archive_mysql]] database_type = MySQL database_name = weewx ############################################################################## # This section defines defaults for the different types of databases. [DatabaseTypes] # Defaults for SQLite databases [[SQLite]] driver = weedb.sqlite # Directory in which the database files are located SQLITE_ROOT = /var/lib/weewx # Defaults for MySQL databases [[MySQL]] driver = weedb.mysql # The host where the database is located host = localhost # The user name for logging in to the host user = XXX obfuscated by wee_debug XXX # The password for the user name password = XXX obfuscated by wee_debug XXX ############################################################################## # This section configures the internal weewx engine. [Engine] [[Services]] # This section specifies the services that should be run. They are # grouped by type, and the order of services within each group # determines the order in which the services will be run. prep_services = weewx.engine.StdTimeSynch data_services = , process_services = weewx.engine.StdConvert, weewx.engine.StdCalibrate, weewx.engine.StdQC, weewx.wxservices.StdWXCalculate archive_services = weewx.engine.StdArchive restful_services = weewx.restx.StdStationRegistry, weewx.restx.StdWunderground, weewx.restx.StdPWSweather, weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS report_services = weewx.engine.StdPrint, weewx.engine.StdReport wee_debug report successfully generated don@One:/var/tmp$ ls kdecache-don sudoers.swp systemd-private-be6a6f92aa214517be50376c8b2aed87-cups.service-jYGuqz kdecache-kdm systemd-private-be6a6f92aa214517be50376c8b2aed87-colord.service-A3sk6k systemd-private-be6a6f92aa214517be50376c8b2aed87-rtkit-daemon.service-pD6z0C don@One:/var/tmp$ > On Sunday, October 2, 2016 at 4:45:43 PM UTC-5, Don l wrote: >> >> I am back to the Weather Station problem now. Previous posts repaired >> system. The operating system is Debian 8.5.0. Recent upgrade from Ubuntu >> 14.04. >> I have an I5 cpu in a MSI Z97 Guard Pro Mother board, 8gig ram, 500 gig >> hd, wired Ps2 keyboard, wireless mouse, and an hdmi monitor. I have the USB >> Ohio Scientific WMR200A weather station and Weewx 3.5.0. Hope that is >> enough info this time. >> >> My problem is that I have installed the weewx. I have run the weewx.conf >> and gave it the parameters for my location and station type. When I call up >> the page to see the weather data (file:///var/www/weewx/index.html) >> I get a Santas Workshop at North pole page. The only thing on the page >> that seems to have been changed is the install date which was August 28 >> 2016. All other date is the default that came with the install. I have >> found two log files that seem to be important. one is the syslog that has >> everything on the systems errors, and the other is Weewx specific which is >> Weewx.log. Weewx.log has all the weewx errors and I will try to copy it >> here. >> >> >> Sep 27 14:29:36 One weewx[5166]: wmr200: MainThread: D Using PC Time: >> True >> Sep 27 14:29:36 One weewx[5166]: wmr200: MainThread: D Erase archive >> data: False >> Sep 27 14:29:36 One weewx[5166]: wmr200: MainThread: D Archive >> interval: 60 >> Sep 27 14:29:36 One weewx[5166]: wmr200: MainThread: D Archive >> threshold: 604800 >> Sep 27 14:29:36 One weewx[5166]: engine: Caught unrecoverable exception >> in engine: >> Sep 27 14:29:36 One weewx[5166]: **** invalid literal for float(): >> 34 54N >> Sep 27 14:29:36 One weewx[5166]: **** Traceback (most recent call >> last): >> Sep 27 14:29:36 One weewx[5166]: **** File >> "/usr/share/weewx/weewx/engine.py", line 853, in main >> Sep 27 14:29:36 One weewx[5166]: **** engine = >> EngineClass(config_dict) >> Sep 27 14:29:36 One weewx[5166]: **** File >> "/usr/share/weewx/weewx/engine.py", line 72, in __init__ >> Sep 27 14:29:36 One weewx[5166]: **** >> self.preLoadServices(config_dict) >> Sep 27 14:29:36 One weewx[5166]: **** File >> "/usr/share/weewx/weewx/engine.py", line 110, in preLoadServices >> Sep 27 14:29:36 One weewx[5166]: **** self.stn_info = >> weewx.station.StationInfo(self.console, **config_dict['Station']) >> Sep 27 14:29:36 One weewx[5166]: **** File >> "/usr/share/weewx/weewx/station.py", line 55, in __init__ >> Sep 27 14:29:36 One weewx[5166]: **** self.latitude_f = >> float(stn_dict['latitude']) >> Sep 27 14:29:36 One weewx[5166]: **** ValueError: invalid literal >> for float(): 34 54N >> Sep 27 14:29:36 One weewx[5166]: **** Exiting. >> Sep 27 14:29:51 One weewx[5166]: wmr200: Thread-2: E read_device() USB >> Error Reason:Connection timed out >> Sep 27 15:06:39 One weewx[5415]: engine: Initializing weewx version 3.5.0 >> Sep 27 15:06:39 One weewx[5415]: engine: Using Python 2.7.9 (default, Jun >> 29 2016, 13:08:31) #012[GCC 4.9.2] >> Sep 27 15:06:39 One weewx[5415]: engine: Platform >> Linux-3.16.0-4-amd64-x86_64-with-debian-8.6 >> Sep 27 15:06:39 One weewx[5415]: engine: Unable to open configuration >> file /weewx >> Sep 27 18:08:49 One weewx[7034]: Reloading weewx weather system: weewx. >> Sep 29 11:14:42 One weewx[21523]: Reloading weewx weather system: weewx. >> : >> >> That is the complete file and I hope that it is helpful. I think I have >> found a DB that is 129,000 bytes long that I think is >> the data that is supposed to be displayed. If it is the data is being >> collected but not displayed. >> >> Also when it runs, How do you get the program to start with a particular >> value? like the current rain fall here is about 38" for the year? >> >> Thanks for any help available to get it running and displaying the >> weather. >> >> Don >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.