Thought I would add my station info in case anyone wants a look. I plan to post to wxforum under SkySpy and GW1000 that this is working so maybe we can get more people trying it out...
https://www.wunderground.com/personal-weather-station/dashboard?ID=KUTPLAIN2#history On Thursday, November 24, 2016 at 9:51:48 AM UTC-7, Paul McGeorge wrote: > > Awesome! Looking good so far. I loaded the new driver and turned the > power off to the gateway, got everything ready to go with weewx and fired > up the recording. Powered up the gateway, saw a one time ping and then > about 3 minutes later the weather station beeped and the clock was set. I > can see pings, data and clock going back and forth in the debug. > > From what I can tell it looks like I get sensor data (01:01 packet) about > once every 30 seconds or so(??) and it is decoding, uploads to WU look to > be about 5 Minutes. I assume that is a weewx setting somewhere. > > My wind vane froze over night due to the sleet and snow so the data looks > stagnant on that... > > Paul > > On Thursday, November 24, 2016 at 6:11:36 AM UTC, mwall wrote: >> >> paul, >> >> thank you for the capture - it finally clued me in to the problem. >> >> it turns out that the gw1000u does not like HTTP/1.0 >> >> python defaults to HTTP/1.0. once i changed it to HTTP/1.1, everything >> started working. >> >> please try the latest interceptor driver v0.17j >> >> the ping interval, sensor interval, and history interval each work >> properly now. it *should* do registration properly, and it *should* >> automatically detect a station that is already registered with lacrosse. >> so it requires minimal configuration. >> >> history packets are ignored for now. at some point i might implement >> catch up so that weewx will read historical data when it starts up. also >> at some point i'll implement a sniff mode for those who want to continue >> using lacrossealerts and want a local weewx copy of data. but for now this >> little piece of hardware has me whupped. >> >> if you don't mind, post another capture of your station chatting with the >> 17j interceptor, just to verify it works. >> >> m >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
