One more note, I still have the serial number set in the config. I didn't try without it but will later after Turkey day activity dies down. Cheers!
On Thursday, November 24, 2016 at 10:06:56 AM UTC-7, Paul McGeorge wrote: > > Thought I would add my station info in case anyone wants a look. I plan > to post to wxforum under SkySpy and GW1000 that this is working so maybe we > can get more people trying it out... > > > https://www.wunderground.com/personal-weather-station/dashboard?ID=KUTPLAIN2#history > > > On Thursday, November 24, 2016 at 9:51:48 AM UTC-7, Paul McGeorge wrote: >> >> Awesome! Looking good so far. I loaded the new driver and turned the >> power off to the gateway, got everything ready to go with weewx and fired >> up the recording. Powered up the gateway, saw a one time ping and then >> about 3 minutes later the weather station beeped and the clock was set. I >> can see pings, data and clock going back and forth in the debug. >> >> From what I can tell it looks like I get sensor data (01:01 packet) about >> once every 30 seconds or so(??) and it is decoding, uploads to WU look to >> be about 5 Minutes. I assume that is a weewx setting somewhere. >> >> My wind vane froze over night due to the sleet and snow so the data looks >> stagnant on that... >> >> Paul >> >> On Thursday, November 24, 2016 at 6:11:36 AM UTC, mwall wrote: >>> >>> paul, >>> >>> thank you for the capture - it finally clued me in to the problem. >>> >>> it turns out that the gw1000u does not like HTTP/1.0 >>> >>> python defaults to HTTP/1.0. once i changed it to HTTP/1.1, everything >>> started working. >>> >>> please try the latest interceptor driver v0.17j >>> >>> the ping interval, sensor interval, and history interval each work >>> properly now. it *should* do registration properly, and it *should* >>> automatically detect a station that is already registered with lacrosse. >>> so it requires minimal configuration. >>> >>> history packets are ignored for now. at some point i might implement >>> catch up so that weewx will read historical data when it starts up. also >>> at some point i'll implement a sniff mode for those who want to continue >>> using lacrossealerts and want a local weewx copy of data. but for now this >>> little piece of hardware has me whupped. >>> >>> if you don't mind, post another capture of your station chatting with >>> the 17j interceptor, just to verify it works. >>> >>> m >>> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
