On Thursday, February 23, 2017 at 10:47:22 AM UTC-5, Ruben Navarro Huedo wrote: > > Running now fine with last driver. > I has readed data from the datalogger from the wmr-300 installation. > This is OK, but if i disconnect it some time (for example 30 minutes) > after starting weewx it begins to log real time data but looses these 30 > minutes. > Is this Ok? >
if the logger is full, then you will 'lose' data. apparently the wmr300 logger must be cleared by punching buttons on the console. if someone knows of software that can clear the logger, please let us know so we can implement this in weewx. if the logger is not full, then it should continue to capture data during the 30 minutes that weewx is not running. when you start weewx, it should read data from the logger. of course, if the logger's archive interval is set to 30 minutes, then you might be 'losing' data because you sampled just less than 30 minutes. in any case, the weewx log will tell you how many records it retrieved from the logger. m -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
