I understand. Problem was logger is FULL.
El jueves, 23 de febrero de 2017, 16:55:18 (UTC+1), mwall escribió: > > On Thursday, February 23, 2017 at 10:47:22 AM UTC-5, Ruben Navarro Huedo > wrote: >> >> Running now fine with last driver. >> I has readed data from the datalogger from the wmr-300 installation. >> This is OK, but if i disconnect it some time (for example 30 minutes) >> after starting weewx it begins to log real time data but looses these 30 >> minutes. >> Is this Ok? >> > > if the logger is full, then you will 'lose' data. apparently the wmr300 > logger must be cleared by punching buttons on the console. if someone > knows of software that can clear the logger, please let us know so we can > implement this in weewx. > > if the logger is not full, then it should continue to capture data during > the 30 minutes that weewx is not running. when you start weewx, it should > read data from the logger. > > of course, if the logger's archive interval is set to 30 minutes, then you > might be 'losing' data because you sampled just less than 30 minutes. > > in any case, the weewx log will tell you how many records it retrieved > from the logger. > m > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
