On Sunday, October 29, 2017 at 4:33:53 PM UTC-4, Steve McGrane wrote: > > I am attempting to install weewx on a Raspberry Pi model B+. > > I installed weewx from the instructions shown here: > http://www.weewx.com/docs/debian.htm > > I wasn't able to get much progress until I enabled debugging to make a > post here. > > Here is the syslog output: (more after the break) > ... > Oct 28 18:28:48 raspberrypi weewx[741]: acurite: Found station at bus=001 > device=008 > Oct 28 18:28:49 raspberrypi weewx[741]: acurite: Failed attempt 10 of 10 > to get LOOP data: error sending control message: Connection timed out > Oct 28 18:29:19 raspberrypi weewx[741]: acurite: Max retries (10) exceeded > for LOOP data > Oct 28 18:29:19 raspberrypi weewx[741]: engine: Main loop exiting. > Shutting engine down. > Oct 28 18:29:19 raspberrypi weewx[741]: engine: Caught WeeWxIOError: Max > retries (10) exceeded for LOOP data > Oct 28 18:29:19 raspberrypi weewx[741]: **** Waiting 60 seconds then > retrying... > > be sure to set the station in usb mode 4
http://weewx.com/docs/hardware.htm#acurite_notes you must do this by punching buttons on the weather station console when the console power cycles, it will revert to usb mode 2, so you'll have to change it to usb mode 3 after any power outage m -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
