3 or 4? I forgot to mention that I have it in 3 and it works some times... but not reliably enough.
Just changed it to 4... no difference. Thanks! On Sunday, October 29, 2017 at 5:19:54 PM UTC-5, mwall wrote: > > > > On Sunday, October 29, 2017 at 4:33:53 PM UTC-4, Steve McGrane wrote: >> >> I am attempting to install weewx on a Raspberry Pi model B+. >> >> I installed weewx from the instructions shown here: >> http://www.weewx.com/docs/debian.htm >> >> I wasn't able to get much progress until I enabled debugging to make a >> post here. >> >> Here is the syslog output: (more after the break) >> ... >> Oct 28 18:28:48 raspberrypi weewx[741]: acurite: Found station at bus=001 >> device=008 >> Oct 28 18:28:49 raspberrypi weewx[741]: acurite: Failed attempt 10 of 10 >> to get LOOP data: error sending control message: Connection timed out >> Oct 28 18:29:19 raspberrypi weewx[741]: acurite: Max retries (10) >> exceeded for LOOP data >> Oct 28 18:29:19 raspberrypi weewx[741]: engine: Main loop exiting. >> Shutting engine down. >> Oct 28 18:29:19 raspberrypi weewx[741]: engine: Caught WeeWxIOError: Max >> retries (10) exceeded for LOOP data >> Oct 28 18:29:19 raspberrypi weewx[741]: **** Waiting 60 seconds then >> retrying... >> >> > be sure to set the station in usb mode 4 > > http://weewx.com/docs/hardware.htm#acurite_notes > > you must do this by punching buttons on the weather station console > > when the console power cycles, it will revert to usb mode 2, so you'll > have to change it to usb mode 3 after any power outage > > m > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
