Tried but it failed:- ray@ray-Aspire-5735:~$ tail -f /var/log/syslog Dec 8 10:04:57 ray-Aspire-5735 weewx[13925]: engine: StdConvert target unit is 0x1 Dec 8 10:04:57 ray-Aspire-5735 weewx[13925]: wxcalculate: The following values will be calculated: barometer=prefer_hardware, windchill=prefer_hardware, dewpoint=prefer_hardware, appTemp=prefer_hardware, rainRate=prefer_hardware, windrun=prefer_hardware, heatindex=prefer_hardware, maxSolarRad=prefer_hardware, humidex=prefer_hardware, pressure=prefer_hardware, inDewpoint=prefer_hardware, ET=prefer_hardware, altimeter=prefer_hardware, cloudbase=prefer_hardware Dec 8 10:04:57 ray-Aspire-5735 weewx[13925]: wxcalculate: The following algorithms will be used for calculations: altimeter=aaNOAA, maxSolarRad=RS Dec 8 10:04:57 ray-Aspire-5735 weewx[13925]: engine: Archive will use data binding wx_binding Dec 8 10:04:57 ray-Aspire-5735 weewx[13925]: engine: Record generation will be attempted in 'software' Dec 8 10:05:12 ray-Aspire-5735 weewx[13925]: fousb: get archive interval failed attempt 1 of 3: [Errno 110] Operation timed out Dec 8 10:05:27 ray-Aspire-5735 weewx[13925]: fousb: get archive interval failed attempt 2 of 3: [Errno 110] Operation timed out Dec 8 10:05:42 ray-Aspire-5735 weewx[13925]: fousb: get archive interval failed attempt 3 of 3: [Errno 110] Operation timed out Dec 8 10:05:42 ray-Aspire-5735 weewx[13925]: engine: Caught WeeWxIOError: Unable to read archive interval after 3 tries Dec 8 10:05:42 ray-Aspire-5735 weewx[13925]: **** Waiting 60 seconds then retrying...
On Friday, 8 December 2017 09:47:40 UTC+1, gjr80 wrote: > > Ray, > > The gedit issue is nothing to do with weeWX. A quick google of that error > message indicates it may be due to running gedit from the command line > rather than from a graphical desktop as it appears to have been intended. I > am afraid I can't help too much on that one as I don't use a Linux > graphical desktop nor do I use gedit. You could try opening another > terminal window and before you start weeWX run the following command in the > new terminal window: > > $ tail -f /var/log/syslog > > Then start weeWX in your original terminal window. This will result in > syslog being displayed in the new terminal window in realtime. > > Alternatively, you could try running gedit from the desktop rather than > the command line. > > Gary > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
