Tried that, result below :- ray@ray-Aspire-5735:~$ sudo gedit /var/log/syslog [sudo] password for ray: ray@ray-Aspire-5735:~$ sudo gedit /var/log/syslog ray@ray-Aspire-5735:~$ ie nothing happened...
On Friday, 8 December 2017 09:52:00 UTC+1, Glenn McKechnie wrote: > > It appears that you're in your home directory. Unless that's where the > syslog file is, nothing useful will happen using sudo gedit syslog. > > Try setting the path to the syslog file... > sudo gedit /var/log/syslog > > and that message is probably ignorable. The perils of running GUI > programs from a terminal - a lot of noise. > > > Cheers > Glenn > > rorpi - read only raspberry pi & various weewx addons > https://github.com/glennmckechnie > > > On 8 December 2017 at 19:30, Ray <[email protected] <javascript:>> > wrote: > > Sorry! Tried again this morning:- > > ray@ray-Aspire-5735:~$ sudo wee_device --info > > Using configuration file /etc/weewx/weewx.conf > > Using FineOffsetUSB driver version 1.9 (weewx.drivers.fousb) > > Querying the station... > > Fine Offset station settings: > > local time: 2017.12.08 09:18:11 CET > > polling mode: PERIODIC > > > > abs_pressure: 1026.6 > > current_pos: 27956 > > data_changed: 0 > > data_count: 140 > > date_time: 2017-12-08 09:17 > > hum_in_offset: 5897 > > hum_out_offset: 2066 > > id: 6143 > > lux_wm2_coeff: 0 > > magic_1: 0x55 > > magic_2: 0xaa > > model: None > > rain_coef: 5137 > > read_period: 5 > > rel_pressure: 1016.5 > > temp_in_offset: 5888 > > temp_out_offset: 0 > > timezone: 17 > > unknown_01: 0 > > unknown_18: 0 > > version: 255 > > wind_coef: 6417 > > wind_mult: 0 > > > > max.abs_pressure.date: 2017-12-05 09:56 > > max.abs_pressure.val: 1034.5 > > max.dewpoint.date: 2015-01-01 12:00 > > max.dewpoint.val: 21.5 > > max.hum_in.date: 2017-11-24 17:54 > > max.hum_in.val: 72 > > max.hum_out.date: 2017-11-23 02:58 > > max.hum_out.val: 99 > > max.illuminance.val: 61345.2 > > max.rain.day.date: 2017-11-25 00:00 > > max.rain.day.val: 60.3 > > max.rain.hour.date: 2015-01-01 16:00 > > max.rain.hour.val: 35.1 > > max.rain.month.date: 2017-12-01 00:00 > > max.rain.month.val: 159.3 > > max.rain.total.date: 2017-12-07 21:53 > > > > max.rain.total.val: 176.4 > > max.rain.week.date: 2017-11-26 00:00 > > max.rain.week.val: 100.8 > > max.rel_pressure.date: 2017-12-05 09:56 > > max.rel_pressure.val: 1024.4 > > max.temp_in.date: 2015-01-01 12:06 > > max.temp_in.val: 25.5 > > max.temp_out.date: 2015-01-01 12:00 > > max.temp_out.val: 26.3 > > max.uv.val: 3 > > max.wind_ave.date: 2017-11-22 12:25 > > max.wind_ave.val: 7.1 > > max.wind_gust.date: 2017-11-22 15:25 > > max.wind_gust.val: 12.9 > > max.windchill.date: 2015-01-01 12:00 > > max.windchill.val: 26.3 > > min.abs_pressure.date: 2017-11-22 15:42 > > min.abs_pressure.val: 1001.4 > > min.dewpoint.date: 2017-12-05 08:30 > > min.dewpoint.val: 0.8 > > min.hum_in.date: 2015-01-01 12:04 > > min.hum_in.val: 32 > > min.hum_out.date: 2017-11-14 12:29 > > min.hum_out.val: 33 > > min.rel_pressure.date: 2017-11-22 15:42 > > min.rel_pressure.val: 991.3 > > min.temp_in.date: 2017-12-06 09:19 > > min.temp_in.val: 17.6 > > min.temp_out.date: 2017-12-06 07:27 > > min.temp_out.val: 2.9 > > min.windchill.date: 2017-12-06 07:27 > > min.windchill.val: 2.9 > > > > settings_1.pressure_inHg: False > > settings_1.pressure_hPa: False > > settings_1.temp_out_F: False > > settings_1.pressure_mmHg: True > > settings_1.rain_in: False > > settings_1.temp_in_F: False > > settings_1.bit4: False > > settings_1.bit3: False > > settings_2.wind_bft: False > > settings_2.wind_mps: False > > settings_2.wind_knot: False > > settings_2.bit7: False > > settings_2.bit6: False > > settings_2.bit5: False > > settings_2.wind_kmph: False > > settings_2.wind_mph: True > > > > display_1.wind_gust: True > > display_1.show_day_name: False > > display_1.show_year: True > > display_1.time_scale_24: True > > display_1.pressure_rel: True > > display_1.alarm_time: False > > display_1.date_mdy: False > > display_1.clock_12hr: False > > display_2.temp_out_temp: True > > display_2.rain_hour: True > > display_2.rain_month: False > > display_2.rain_week: False > > display_2.temp_out_chill: False > > display_2.rain_day: False > > display_2.temp_out_dew: False > > display_2.rain_total: False > > display_3.illuminance_fc: False > > display_3.bit7: False > > display_3.bit6: False > > display_3.bit5: False > > display_3.bit4: False > > display_3.bit3: False > > display_3.bit2: False > > display_3.bit1: False > > > > alarm.abs_pressure.hi: 780.0 > > alarm.abs_pressure.lo: 720.1 > > alarm.dewpoint.hi: 10.0 > > alarm.dewpoint.lo: -10.0 > > alarm.hum_in.hi: 75 > > alarm.hum_in.lo: 35 > > alarm.hum_out.hi: 90 > > alarm.hum_out.lo: 24 > > alarm.illuminance: 300000.3 > > alarm.rain.day: 150.0 > > alarm.rain.hour: 3.0 > > alarm.rel_pressure.hi: 780.0 > > alarm.rel_pressure.lo: 720.1 > > alarm.temp_in.hi: 20.0 > > alarm.temp_in.lo: 0 > > alarm.temp_out.hi: 34.0 > > alarm.temp_out.lo: -1.0 > > alarm.time: 12:00 > > alarm.uv: 7 > > alarm.wind_ave.bft: 3 > > alarm.wind_ave.ms: 12.1 > > alarm.wind_dir: 0 > > alarm.wind_gust.bft: 5 > > alarm.wind_gust.ms: 23.9 > > alarm.windchill.hi: 20.0 > > alarm.windchill.lo: 0 > > alarm_1.hum_out_hi: False > > alarm_1.hum_in_lo: False > > alarm_1.hum_in_hi: False > > alarm_1.hum_out_lo: False > > alarm_1.time: False > > alarm_1.bit3: False > > alarm_1.wind_dir: False > > alarm_1.bit0: False > > alarm_2.wind_ave: False > > alarm_2.wind_gust: False > > alarm_2.rain_hour: False > > alarm_2.pressure_rel_lo: False > > alarm_2.pressure_abs_hi: False > > alarm_2.rain_day: False > > alarm_2.pressure_rel_hi: False > > alarm_2.pressure_abs_lo: False > > alarm_3.temp_out_hi: False > > alarm_3.wind_chill_lo: False > > alarm_3.dew_point_lo: False > > alarm_3.temp_in_lo: False > > alarm_3.wind_chill_hi: False > > alarm_3.temp_in_hi: False > > alarm_3.temp_out_lo: False > > alarm_3.dew_point_hi: False > > ray@ray-Aspire-5735:~$ sudo wee_device --clear-memory > > Using configuration file /etc/weewx/weewx.conf > > Using FineOffsetUSB driver version 1.9 (weewx.drivers.fousb) > > Records in memory: 140 > > Clear console memory (y/n)? y > > Records in memory: 1 > > ray@ray-Aspire-5735:~$ /etc/init.d/weewx stop > > [ ok ] Stopping weewx (via systemctl): weewx.service. > > ray@ray-Aspire-5735:~$ /etc/init.d/weewx start > > [ ok ] Starting weewx (via systemctl): weewx.service. > > ray@ray-Aspire-5735:~$ sudo gedit syslog > > > > ** (gedit:13949): WARNING **: Set document metadata failed: Setting > > attribute metadata::gedit-position not supported > > > > All seemed to go weel up to calling for syslog what's wrong now? > > > > > > On Thursday, 7 December 2017 20:25:22 UTC+1, vince wrote: > >> > >> On Thursday, December 7, 2017 at 10:43:39 AM UTC-8, Ray wrote: > >>> > >>> My apologies, I forgot the --clear-memory action, did it with this > >>> result:- > >>> > >>> ray@ray-Aspire-5735:~$ wee_device --clear memory > >>> > >>> IOError: memory is not a file > >>> > >> > >> c'mon Ray - look very carefully at what you typed..... > >> > >> I think you might be overthinking stuff and making typos at this > >> point..... > > > > -- > > You received this message because you are subscribed to the Google > Groups > > "weewx-user" group. > > To unsubscribe from this group and stop receiving emails from it, send > an > > email to [email protected] <javascript:>. > > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
