Basically, I have the smart hub and raspberry pi plugged into the managed switch with the smart hub port mirrored to the raspberry pi port. I have the interceptor driver listening for the TCP traffic. Another option I'm currently using is RTL Dongle and RTL_433 software to decode the signal from the Acurite 5+1 and pass that data to Node-Red. At this time, I did not try the weewx-sdr driver.
On Tuesday, May 15, 2018 at 10:34:16 PM UTC-4, Max G wrote: > > Thanks Rich... >> > > The Vantage Pro is certainly a good piece of equipment, but costs more > than I am prepared to spend. > Can certainly live with the Acurite 5+1. > > I didn't get the Acurite intercept thing... is it the smart hub... is this > device required in order to intercept TCP traffic? > Or will WeeWX simply listen to TCP traffic on the network and does its > magic? with the interceptor driver only? > > The Acurite 5+1 is usually 200AUD. But I am not keen to spend another > 130AUD in the smart hub. > > > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
