Just be aware that I'm only running 'simulator' so don't panic if you see awful weather here! :)
On Wed, Sep 5, 2018 at 3:42 PM G Hammer <[email protected]> wrote: > As a ‘known good’ I will try if my data fails. > > > On Tue, Sep 4, 2018 at 11:41 PM Colin Larsen <[email protected]> > wrote: > >> I guess as another test if needed, you could just connect to my feed and >> read my data into your page too >> >> On Wed, Sep 5, 2018 at 3:40 PM G Hammer <[email protected]> wrote: >> >>> Yep, I’ll just swap to the test server. >>> Thanks >>> >>> On Tue, Sep 4, 2018 at 11:38 PM Colin Larsen <[email protected]> >>> wrote: >>> >>>> You may need to change unit_system to match yours is all >>>> >>>> On Wed, 5 Sep 2018, 15:25 G Hammer, <[email protected]> wrote: >>>> >>>>> Thanks. >>>>> I’ll swap to test tomorrow. >>>>> >>>>> >>>>> It’s always something... >>>>> >>>>> >>>>> On Tue, Sep 4, 2018 at 11:01 PM Colin Larsen <[email protected]> >>>>> wrote: >>>>> >>>>>> Here's mine that work fine >>>>>> >>>>>> >>>>>> Weewx.conf >>>>>> >>>>>> [[MQTT]] >>>>>> >>>>>> #This section is for the MQTT service setup >>>>>> >>>>>> server_url = mqtt://test.mosquitto.org:1883/ >>>>>> >>>>>> topic = weather/41south >>>>>> >>>>>> unit_system = METRIC >>>>>> >>>>>> binding = archive, loop >>>>>> >>>>>> aggregation = aggregate >>>>>> >>>>>> Skin.conf >>>>>> >>>>>> >>>>>> # MQTT Defaults >>>>>> >>>>>> mqtt_enabled = 1 >>>>>> >>>>>> mqtt_host = "test.mosquitto.org" >>>>>> >>>>>> mqtt_port = 8080 >>>>>> >>>>>> mqtt_ssl = 0 >>>>>> >>>>>> mqtt_topic = "weather/41south/#" >>>>>> >>>>>> disconnect_live_website_visitor = 1800000 >>>>>> >>>>>> On Wed, Sep 5, 2018 at 2:31 PM G Hammer <[email protected]> >>>>>> wrote: >>>>>> >>>>>>> I can say that my mosquitto install is not using websockets. >>>>>>> With mqtt-spy on the server, I can set it up for either default or >>>>>>> websockets. >>>>>>> Default works fine, websockets does not. >>>>>>> Though only item I changed in the mosquitto.conf is protocol >>>>>>> websockets >>>>>>> >>>>>>> So, stumped. Anyone have a working mosquitto install that they would >>>>>>> share the conf? >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> On Tuesday, September 4, 2018 at 5:53:18 PM UTC-4, Pat wrote: >>>>>>>> >>>>>>>> On second glance, use this tool instead. >>>>>>>> http://mitsuruog.github.io/what-mqtt/ since it can support SSL >>>>>>>> brokers (even though it's not documented). Maybe I should setup my own >>>>>>>> websocket test tool? :) >>>>>>>> >>>>>>>> If your MQTT is setup with SSL, then you'll want to connect to >>>>>>>> secure websockets with WSS. Otherwise it'll use normal websockets >>>>>>>> which is >>>>>>>> ws. >>>>>>>> >>>>>>>> Example: wss://your.broker.com:port for secure. Then subscribe to >>>>>>>> your topic and see if its working >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> On Tuesday, September 4, 2018 at 5:44:14 PM UTC-4, Pat wrote: >>>>>>>>> >>>>>>>>> The skin - at its core - will show the data from the previous >>>>>>>>> archive. Once connected it'll update those fields from the MQTT >>>>>>>>> messages. >>>>>>>>> >>>>>>>>> The MQTT will show "connected" in the status bar once it gets a >>>>>>>>> timestamp from the published message. >>>>>>>>> >>>>>>>>> Check to make sure your broker allows websockets. To validate you >>>>>>>>> can use this test tool. >>>>>>>>> http://www.hivemq.com/demos/websocket-client/ >>>>>>>>> >>>>>>>>> If that test tool works, make sure your config options are >>>>>>>>> correct. >>>>>>>>> >>>>>>>>> Anything in the Chrome console log? >>>>>>>>> >>>>>>>>> On Tuesday, September 4, 2018 at 4:53:08 PM UTC-4, G Hammer wrote: >>>>>>>>>> >>>>>>>>>> Hi Colin, >>>>>>>>>> >>>>>>>>>> I don't think the problem is with sending or retrieving data from >>>>>>>>>> the MQTT server, I have done both the test.mosquitto.org and >>>>>>>>>> then installed mosquitto on my server. >>>>>>>>>> I used MQTT.fx to subscribe to both and both are getting the data. >>>>>>>>>> The skin is getting data as it shows the temp, humidity, wind, >>>>>>>>>> but never shows a connection and never completes the main page. >>>>>>>>>> Graphs on >>>>>>>>>> the page are missing/blank but shown on the Graphs page. >>>>>>>>>> >>>>>>>>>> You can better understand the issue by visiting the site. After >>>>>>>>>> you are there for 30 seconds or so, refresh the page and see that >>>>>>>>>> the data >>>>>>>>>> has changed. >>>>>>>>>> My Weather Site <https://ghammer.net/weather/> >>>>>>>>>> >>>>>>>>> >>>>>>>>>> -- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "weewx-user" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to [email protected]. >>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>> >>>>>> -- >>>>>> You received this message because you are subscribed to a topic in >>>>>> the Google Groups "weewx-user" group. >>>>>> To unsubscribe from this topic, visit >>>>>> https://groups.google.com/d/topic/weewx-user/81PjpX0Ajas/unsubscribe. >>>>>> To unsubscribe from this group and all its topics, send an email to >>>>>> [email protected]. >>>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>>> >>>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "weewx-user" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to [email protected]. >>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>> -- >>>> You received this message because you are subscribed to a topic in the >>>> Google Groups "weewx-user" group. >>>> To unsubscribe from this topic, visit >>>> https://groups.google.com/d/topic/weewx-user/81PjpX0Ajas/unsubscribe. >>>> To unsubscribe from this group and all its topics, send an email to >>>> [email protected]. >>>> For more options, visit https://groups.google.com/d/optout. >>> >>> >>>> -- >>> You received this message because you are subscribed to the Google >>> Groups "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >>> >> -- >> You received this message because you are subscribed to a topic in the >> Google Groups "weewx-user" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/weewx-user/81PjpX0Ajas/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
