I'm a bit confused about your setup, you are using 2 routers? How is everything connected? I know that there's community firmware for the Asus RT-AC68U, Asuswrt-Merlin, so maybe that could be an option if the standard firmware does not give you access to iptables. I'm not sure but the interceptor driver can also be used in sniffer mode, as per kan6526 suggestion, thus no modifications to iptables should be required.
My setup is like this, my raspberry pi (raspbian, weewx, interceptor driver) and bridge are connected (via wifi) to the router TL-WR1043ND (running gargoyle firmware), at this router I placed the two lines mentioned before in iptables, the correct place for that on the gargoyle/openwrt firmware is /etc/firewall.user. These two lines redirect the traffic leaving from port 80 of the bridge to the ip of the raspberry pi, at the pi the redirected traffic enters at port 666 were the interceptor driver is waiting for it. domingo, 25 de Novembro de 2018 às 10:47:40 UTC, Massimiliano Neri escreveu: > > The latest WH-2650 interfacing tests with weewx seem to work all the same > even if I have to complete some tests, however there are still problems. > For the tests I used a "tp-link tl-wa701nd" where I installed the Gargoyle > firmware, connected the "Orange Pi Zero" through its WiFi, connected to the > tp-link also the bridge of the WH-2650, made the changes that Tanwe Hyalin > told me at /etc/firewall.user. > On Orange Pi Zero I installed weewx and the "interceptor" extension, > configuring the software according to the specifications given in previous > posts. > Made all this works perfectly. > As I said before some problems remain, and I can not find the part of the > iptables in my main router ASUS RT-AC68U, I entered ssh mode but I can not > see where I can enter the changes to the firewall. > Does anyone have any ideas? I did not want to put another router to handle > the WH-2650 weewx and the bridge. > Soon I would like to try again, install the OpenWRT image on the small > Orange Pi Zero, install weewx inside OpenWRT, make the firewall changes and > connect the bridge directly to the Orange Pi Zero OpenWRT in order to have > everything on one device . > As soon as I have completed the tests, I postpone my conclusions. > > Il giorno venerdì 23 novembre 2018 00:11:49 UTC+1, Massimiliano Neri ha > scritto: >> >> Hi, I just bought a WaldBeck Halley WH-2650, basically a clone of the >> WH-2650 Fine Offset, can you tell me how to configure weewx.conf to >> intercept its data string? >> >> I thank you in advance. >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
