Is it possible that the issue is generated by this configuration?
[StdArchive]
# If the station hardware supports data logging then the archive
interval
# will be downloaded from the station. Otherwise, specify it (in
seconds).
archive_interval = 300
# If possible, new archive records are downloaded from the station
# hardware. If the hardware does not support this, then new archive
# records will be generated in software.
# Set the following to "software" to force software record generation.
record_generation = software
Archive interval to 300 could be not syncronized with the datalogger, right?
Il giorno sabato 19 gennaio 2019 07:45:39 UTC+1, Raffaello Di Martino
IZ0QWM ha scritto:
>
> Hi all.
> I'm trying to validate an high wind speed gust registered by one station.
> Reading the weewx database I noticed that there are values of "windgust"
> repeated.
>
> I have the Davis datalogger configured to store data every 5 minutes.
> Weewx does not have any configuration about "windgust" in the "calculate"
> section.
> I thought that the windgust is the maximum wind speed registered within
> the 5 minutes. But how is possible that it is repeated.
> So I checked also at the weather station that I have at home and...same
> issue.
>
> Is there someone that can explain this ? It seems that the 5 minutes
> registered in the weewx is not syncronous to the 5 minutes of the Davis
> recording
>
> Can I consider the data of the "windgust" valid?
>
> Thank to all
>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
