So the idea of running Observer IP module, it wont work too? I can place it up near the roof and pull a network cable from there to my apartment, I want to understand what changes I will need to make to make it work from my existing setup
On Tuesday, 9 April 2019 23:51:26 UTC+3, Scott Grayban wrote: > > So it must be pretty thick concrete to restrict signal. Nothing we can do > help on that. > > On Tuesday, April 9, 2019 at 1:39:12 PM UTC-7, Adnan Mumtaz wrote: >> >> Its all concrete here, right now I am on the top floor and the station is >> above me on roof and I get full signals only in the room which is under the >> roof where the station is installed. >> >> On Tuesday, 9 April 2019 21:47:25 UTC+3, Scott Grayban wrote: >>> >>> My WS is 40 feet up and 55 feet away from my console and my signal is >>> strong. >>> >>> Unless your roof is metal and the walls are metal you shouldn't have any >>> problems. >>> >>> On Tuesday, April 9, 2019 at 11:42:00 AM UTC-7, Tom Robertson wrote: >>>> >>>> Why do you say you will not be able to get the signals from the roof to >>>> your station? The third floor will probably be less than 40 feet from the >>>> ground. My wireless Davis station sends signals much farther than 40 feet >>>> and through several walls. >>>> ----- >>>> Tom >>>> >>>> On Apr 9, 2019, at 1:22 PM, Adnan Mumtaz <[email protected]> wrote: >>>> >>>> Hi Scott, you had been very helpful earlier, I am getting into a >>>>>>>>>>>> situation soon, moving my apartment and in the new apartment I >>>>>>>>>>>> will be on >>>>>>>>>>>> the ground floor and the station will be at the 3rd floor which is >>>>>>>>>>>> the >>>>>>>>>>>> roof, there is no way I will get signals from the station to the >>>>>>>>>>>> display >>>>>>>>>>>> base screen, hence I have planned to buy ObserverIP module and >>>>>>>>>>>> keep it near >>>>>>>>>>>> the station on the 3rd floor and pull a network cable from >>>>>>>>>>>> ObserverIP to >>>>>>>>>>>> my apartment to connect it to my home network, I will also need >>>>>>>>>>>> standalone >>>>>>>>>>>> hygrometer module for barometer readings since I my base station >>>>>>>>>>>> wont be >>>>>>>>>>>> working any more and the barometer is inside the display screen. >>>>>>>>>>>> Right now >>>>>>>>>>>> my setup is jsut like yours, what modifications you suggest I will >>>>>>>>>>>> need to >>>>>>>>>>>> do to make the observerIP work. >>>>>>>>>>> >>>>>>>>>>> >>>> If nothing works out the only solution will be to invest in a cabled >>>> Davis station which will be not easy on my pocket specially the shipping >>>> and custom charges. >>>> >>>> Will appreciate your response at your ease. >>>> >>>> Thank you, >>>> Adnan >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "weewx-user" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>>> >>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
