Mine should be in imperial because I live in the US. I would post the issues with the skin in https://groups.google.com/forum/#!topic/weewx-user/6Sa3vfzsH6k
On Sunday, January 27, 2019 at 10:15:28 PM UTC-8, Adnan Mumtaz wrote: > > With prefer_hardware it seems weewx calculates and i get wrong figures, by > the way my cloud base shows in meters as I have group_altitude = meter , > but when I change it to foot the skin calculates fine but when MQTT updates > the data it changes to meter readings, MQTT setting is also set as METRIC. > I see yours in feet too. > > On Monday, 28 January 2019 01:55:32 UTC+3, Scott Grayban wrote: >> >> they should be set to prefer_hardware >> >> On Saturday, January 26, 2019 at 1:07:57 AM UTC-8, Adnan Mumtaz wrote: >>> >>> Changed the below two calculations from prefer_hardware to hardware only >>> and now weewx is not re-calculating the figures. >>> >>> [[Calculations]] >>> pressure = hardware >>> barometer = hardware >>> >>> >>> On Saturday, 26 January 2019 00:18:41 UTC+3, Scott Grayban wrote: >>>> >>>> Correct -- the barometer is calculated by the console. So what you have >>>> now are 2 different readings, 1 from the console and the one calculated by >>>> weewx. >>>> >>>> On Friday, January 25, 2019 at 1:10:02 PM UTC-8, Adnan Mumtaz wrote: >>>>> >>>>> By the way the outdoor unit doesnt have the barometer, interestingly >>>>> the barometer is in the display unit confirmed by Ambient Weather support >>>>> >>>>> On Sat, Jan 26, 2019 at 12:08 AM Adnan Mumtaz <[email protected]> >>>>> wrote: >>>>> >>>>>> Its on a pole the reading is correct on the main display, it all >>>>>> happened after i re-calibrated barometer relative pressure on the >>>>>> display >>>>>> unit , it looks like weewx is calculating something else, but MQTT gets >>>>>> the >>>>>> correct reading, right now the reading on the display unit is 1019.6 >>>>>> >>>>>> On Fri, Jan 25, 2019 at 11:45 PM Scott Grayban <[email protected]> >>>>>> wrote: >>>>>> >>>>>>> That's odd. Did you mount the WS on a pole or is it still laying on >>>>>>> the roof ? >>>>>>> >>>>>>> On Friday, January 25, 2019 at 12:36:39 PM UTC-8, Adnan Mumtaz wrote: >>>>>>>> >>>>>>>> Open riyadhweather.com and notice the barometer reading changes, >>>>>>>> gives 3 readings when it retrieves data using and one is correct only >>>>>>>> >>>>>>>> On Friday, 25 January 2019 23:29:01 UTC+3, Scott Grayban wrote: >>>>>>>>> >>>>>>>>> ??? >>>>>>>>> >>>>>>>>> On Friday, January 25, 2019 at 6:37:43 AM UTC-8, Adnan Mumtaz >>>>>>>>> wrote: >>>>>>>>>> >>>>>>>>>> Everything seemed fine , i calibrated the barometer on the >>>>>>>>>> display unit and since then Im seeing a different in barometer MQTT >>>>>>>>>> data >>>>>>>>>> update with the real data, it shows real data and then shows a wrong >>>>>>>>>> data >>>>>>>>>> and it keeps going on like this, >>>>>>>>>> >>>>>>>>>> On Wednesday, 23 January 2019 16:48:27 UTC+3, Adnan Mumtaz wrote: >>>>>>>>>>> >>>>>>>>>>> Thanks I will try it too, like this template too >>>>>>>>>>> >>>>>>>>>>> On Wed, Jan 23, 2019 at 4:06 AM steeple ian <[email protected]> >>>>>>>>>>> wrote: >>>>>>>>>>> >>>>>>>>>>>> Adnan, >>>>>>>>>>>> >>>>>>>>>>>> Yes I can confirm that you can run weather34 alongside any >>>>>>>>>>>> other skin. The install process is slightly different from a >>>>>>>>>>>> regular weeWX >>>>>>>>>>>> skin but it works just fine with any other skin alongside. >>>>>>>>>>>> >>>>>>>>>>>> Ian >>>>>>>>>>>> >>>>>>>>>>>> On 22 Jan 2019, at 21:39, Adnan Mumtaz <[email protected]> >>>>>>>>>>>> wrote: >>>>>>>>>>>> >>>>>>>>>>>> Thanks Scott, you are so helpful. Ever tried Weather34 template >>>>>>>>>>>> using weewx ? Is it possible to run 2 templates? >>>>>>>>>>>> >>>>>>>>>>>> On Tue, Jan 22, 2019 at 10:50 PM Scott Grayban < >>>>>>>>>>>> [email protected]> wrote: >>>>>>>>>>>> >>>>>>>>>>>>> There are a few ways to do this... >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> https://www.raspberrypi.org/documentation/linux/filesystem/backup.md >>>>>>>>>>>>> >>>>>>>>>>>>> On Monday, January 21, 2019 at 8:24:40 PM UTC-8, Adnan Mumtaz >>>>>>>>>>>>> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>> Wonder how can I take a backup of all what I did. >>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>>> it, send an email to [email protected]. >>>>>>>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>> it, send an email to [email protected]. >>>>>>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>> it, send an email to [email protected]. >>>>>>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>>>>>> >>>>>>>>>>> -- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "weewx-user" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to [email protected]. >>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>> >>>>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
