they should be set to prefer_hardware On Saturday, January 26, 2019 at 1:07:57 AM UTC-8, Adnan Mumtaz wrote: > > Changed the below two calculations from prefer_hardware to hardware only > and now weewx is not re-calculating the figures. > > [[Calculations]] > pressure = hardware > barometer = hardware > > > On Saturday, 26 January 2019 00:18:41 UTC+3, Scott Grayban wrote: >> >> Correct -- the barometer is calculated by the console. So what you have >> now are 2 different readings, 1 from the console and the one calculated by >> weewx. >> >> On Friday, January 25, 2019 at 1:10:02 PM UTC-8, Adnan Mumtaz wrote: >>> >>> By the way the outdoor unit doesnt have the barometer, interestingly the >>> barometer is in the display unit confirmed by Ambient Weather support >>> >>> On Sat, Jan 26, 2019 at 12:08 AM Adnan Mumtaz <[email protected]> wrote: >>> >>>> Its on a pole the reading is correct on the main display, it all >>>> happened after i re-calibrated barometer relative pressure on the display >>>> unit , it looks like weewx is calculating something else, but MQTT gets >>>> the >>>> correct reading, right now the reading on the display unit is 1019.6 >>>> >>>> On Fri, Jan 25, 2019 at 11:45 PM Scott Grayban <[email protected]> >>>> wrote: >>>> >>>>> That's odd. Did you mount the WS on a pole or is it still laying on >>>>> the roof ? >>>>> >>>>> On Friday, January 25, 2019 at 12:36:39 PM UTC-8, Adnan Mumtaz wrote: >>>>>> >>>>>> Open riyadhweather.com and notice the barometer reading changes, >>>>>> gives 3 readings when it retrieves data using and one is correct only >>>>>> >>>>>> On Friday, 25 January 2019 23:29:01 UTC+3, Scott Grayban wrote: >>>>>>> >>>>>>> ??? >>>>>>> >>>>>>> On Friday, January 25, 2019 at 6:37:43 AM UTC-8, Adnan Mumtaz wrote: >>>>>>>> >>>>>>>> Everything seemed fine , i calibrated the barometer on the display >>>>>>>> unit and since then Im seeing a different in barometer MQTT data >>>>>>>> update >>>>>>>> with the real data, it shows real data and then shows a wrong data and >>>>>>>> it >>>>>>>> keeps going on like this, >>>>>>>> >>>>>>>> On Wednesday, 23 January 2019 16:48:27 UTC+3, Adnan Mumtaz wrote: >>>>>>>>> >>>>>>>>> Thanks I will try it too, like this template too >>>>>>>>> >>>>>>>>> On Wed, Jan 23, 2019 at 4:06 AM steeple ian <[email protected]> >>>>>>>>> wrote: >>>>>>>>> >>>>>>>>>> Adnan, >>>>>>>>>> >>>>>>>>>> Yes I can confirm that you can run weather34 alongside any other >>>>>>>>>> skin. The install process is slightly different from a regular weeWX >>>>>>>>>> skin >>>>>>>>>> but it works just fine with any other skin alongside. >>>>>>>>>> >>>>>>>>>> Ian >>>>>>>>>> >>>>>>>>>> On 22 Jan 2019, at 21:39, Adnan Mumtaz <[email protected]> wrote: >>>>>>>>>> >>>>>>>>>> Thanks Scott, you are so helpful. Ever tried Weather34 template >>>>>>>>>> using weewx ? Is it possible to run 2 templates? >>>>>>>>>> >>>>>>>>>> On Tue, Jan 22, 2019 at 10:50 PM Scott Grayban <[email protected]> >>>>>>>>>> wrote: >>>>>>>>>> >>>>>>>>>>> There are a few ways to do this... >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> https://www.raspberrypi.org/documentation/linux/filesystem/backup.md >>>>>>>>>>> >>>>>>>>>>> On Monday, January 21, 2019 at 8:24:40 PM UTC-8, Adnan Mumtaz >>>>>>>>>>> wrote: >>>>>>>>>>>> >>>>>>>>>>>> Wonder how can I take a backup of all what I did. >>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>> it, send an email to [email protected]. >>>>>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>>> send an email to [email protected]. >>>>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>>> send an email to [email protected]. >>>>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>>>> >>>>>>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "weewx-user" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to [email protected]. >>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>>
-- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
