With prefer_hardware it seems weewx calculates and i get wrong figures, by the way my cloud base shows in meters as I have group_altitude = meter , but when I change it to foot the skin calculates fine but when MQTT updates the data it changes to meter readings, MQTT setting is also set as METRIC. I see yours in feet too.
On Monday, 28 January 2019 01:55:32 UTC+3, Scott Grayban wrote: > > they should be set to prefer_hardware > > On Saturday, January 26, 2019 at 1:07:57 AM UTC-8, Adnan Mumtaz wrote: >> >> Changed the below two calculations from prefer_hardware to hardware only >> and now weewx is not re-calculating the figures. >> >> [[Calculations]] >> pressure = hardware >> barometer = hardware >> >> >> On Saturday, 26 January 2019 00:18:41 UTC+3, Scott Grayban wrote: >>> >>> Correct -- the barometer is calculated by the console. So what you have >>> now are 2 different readings, 1 from the console and the one calculated by >>> weewx. >>> >>> On Friday, January 25, 2019 at 1:10:02 PM UTC-8, Adnan Mumtaz wrote: >>>> >>>> By the way the outdoor unit doesnt have the barometer, interestingly >>>> the barometer is in the display unit confirmed by Ambient Weather support >>>> >>>> On Sat, Jan 26, 2019 at 12:08 AM Adnan Mumtaz <[email protected]> >>>> wrote: >>>> >>>>> Its on a pole the reading is correct on the main display, it all >>>>> happened after i re-calibrated barometer relative pressure on the display >>>>> unit , it looks like weewx is calculating something else, but MQTT gets >>>>> the >>>>> correct reading, right now the reading on the display unit is 1019.6 >>>>> >>>>> On Fri, Jan 25, 2019 at 11:45 PM Scott Grayban <[email protected]> >>>>> wrote: >>>>> >>>>>> That's odd. Did you mount the WS on a pole or is it still laying on >>>>>> the roof ? >>>>>> >>>>>> On Friday, January 25, 2019 at 12:36:39 PM UTC-8, Adnan Mumtaz wrote: >>>>>>> >>>>>>> Open riyadhweather.com and notice the barometer reading changes, >>>>>>> gives 3 readings when it retrieves data using and one is correct only >>>>>>> >>>>>>> On Friday, 25 January 2019 23:29:01 UTC+3, Scott Grayban wrote: >>>>>>>> >>>>>>>> ??? >>>>>>>> >>>>>>>> On Friday, January 25, 2019 at 6:37:43 AM UTC-8, Adnan Mumtaz wrote: >>>>>>>>> >>>>>>>>> Everything seemed fine , i calibrated the barometer on the display >>>>>>>>> unit and since then Im seeing a different in barometer MQTT data >>>>>>>>> update >>>>>>>>> with the real data, it shows real data and then shows a wrong data >>>>>>>>> and it >>>>>>>>> keeps going on like this, >>>>>>>>> >>>>>>>>> On Wednesday, 23 January 2019 16:48:27 UTC+3, Adnan Mumtaz wrote: >>>>>>>>>> >>>>>>>>>> Thanks I will try it too, like this template too >>>>>>>>>> >>>>>>>>>> On Wed, Jan 23, 2019 at 4:06 AM steeple ian <[email protected]> >>>>>>>>>> wrote: >>>>>>>>>> >>>>>>>>>>> Adnan, >>>>>>>>>>> >>>>>>>>>>> Yes I can confirm that you can run weather34 alongside any other >>>>>>>>>>> skin. The install process is slightly different from a regular >>>>>>>>>>> weeWX skin >>>>>>>>>>> but it works just fine with any other skin alongside. >>>>>>>>>>> >>>>>>>>>>> Ian >>>>>>>>>>> >>>>>>>>>>> On 22 Jan 2019, at 21:39, Adnan Mumtaz <[email protected]> >>>>>>>>>>> wrote: >>>>>>>>>>> >>>>>>>>>>> Thanks Scott, you are so helpful. Ever tried Weather34 template >>>>>>>>>>> using weewx ? Is it possible to run 2 templates? >>>>>>>>>>> >>>>>>>>>>> On Tue, Jan 22, 2019 at 10:50 PM Scott Grayban < >>>>>>>>>>> [email protected]> wrote: >>>>>>>>>>> >>>>>>>>>>>> There are a few ways to do this... >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> https://www.raspberrypi.org/documentation/linux/filesystem/backup.md >>>>>>>>>>>> >>>>>>>>>>>> On Monday, January 21, 2019 at 8:24:40 PM UTC-8, Adnan Mumtaz >>>>>>>>>>>> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>> Wonder how can I take a backup of all what I did. >>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>> it, send an email to [email protected]. >>>>>>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>> it, send an email to [email protected]. >>>>>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>> it, send an email to [email protected]. >>>>>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>>>>> >>>>>>>>>> -- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "weewx-user" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>> send an email to [email protected]. >>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>> >>>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
