I give up - looks correct to me. have you run from the command line and seen the LOOP and REC data weewx is receiving?
what altitude is your station, and what values are you currently getting for pressure, barometer and altimeter? On Thursday, 13 February 2020 22:10:08 UTC+2, Dan Blanchard wrote: > > I don't know, but that makes sense so I did it. I'm still not getting > desired results though. > > On Thursday, February 13, 2020 at 9:38:55 AM UTC-8, Kevin Davis wrote: >> >> Do you need a space between your minus sign and the adjustment value? >> >> On Thu, Feb 13, 2020 at 9:32 AM Dan Blanchard <[email protected]> wrote: >> >>> Hey Andrew, will you please look at the attached screen shots and let me >>> know if this looks correct? >>> >>> Do I need to restart (sudo /etc/init.d/weewx restart) after I make >>> these changes? I have and the changes don't seem to be taking effect. Is >>> there something else I need to do? >>> >>> With regard to the barometer and altimeter having the same settings; I >>> have probably misled. They are not exactly the same but they were >>> relatively close to each other compared to the pressure value. Here are >>> the current readings as of now when I run sudo weewxd >>> /etc/weewx/weewx.conf. >>> >>> pressure: 29.98 >>> altimeter: 32.57 >>> barometer: 32.74 >>> >>> >>> >>> On Thursday, February 13, 2020 at 12:07:50 AM UTC-8, Andrew Milner wrote: >>>> >>>> If you have a LaCrosse WS28xx station then according to the hardware >>>> guide the station outputs PRESSURE in weewx terminology - regardless of >>>> what LaCrosse call it - and weewx should calculate barometer and altimeter >>>> settings. >>>> >>>> If pressure is incorrect then it can be adjusted as you specified - by >>>> adjusting pressure (not barometer or altimeter) >>>> >>>> Make sure pressure is set to use hardware and barometer and altimeter >>>> are set to use software. >>>> >>>> I am surprised barometer and altimeter are the same values - have you >>>> set the station's altitude in weewx.conf, and have you specified software >>>> generation for the values? >>>> >>>> >>>> >>>> On Thursday, 13 February 2020 09:23:27 UTC+2, Dan Blanchard wrote: >>>>> >>>>> Andrew, are you suggesting that I make a 'correction' entry under >>>>> [StdCalibrate] such as barometer = barometer -2.8 assuming that I am >>>>> getting a pressure reading of 30.13 and Barometer and ALtitude readings >>>>> of >>>>> 32.93? >>>>> >>>>> (see attached screenshot) >>>>> >>>>> On Wednesday, February 12, 2020 at 7:42:08 PM UTC-8, Andrew Milner >>>>> wrote: >>>>>> >>>>>> 1. use stdcalibrate section of weewx.conf >>>>>> http://weewx.com/docs/usersguide.htm#StdCalibrate >>>>>> 2. FO station = Fine Offset weather station >>>>>> >>>>>> >>>>>> >>>>>> On Wednesday, 12 February 2020 22:15:48 UTC+2, Dan Blanchard wrote: >>>>>>> >>>>>>> Andrew, how do I calibrate the pressure in weewx? Also, what's a FO >>>>>>> station? >>>>>>> >>>>>>> On Tuesday, February 11, 2020 at 8:01:08 PM UTC-8, Andrew Milner >>>>>>> wrote: >>>>>>>> >>>>>>>> check that the absolute pressure is correct - I have had a FO >>>>>>>> station which had a dodgy pressure sensor before now. Calibrating >>>>>>>> pressure >>>>>>>> in weewx solved it. >>>>>>>> >>>>>>> -- >>> You received this message because you are subscribed to the Google >>> Groups "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/weewx-user/08c79655-b1af-4134-9a2b-82a4f52f051f%40googlegroups.com >>> >>> <https://groups.google.com/d/msgid/weewx-user/08c79655-b1af-4134-9a2b-82a4f52f051f%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/617c3831-cd98-4f19-8ac8-5d5106bd5b44%40googlegroups.com.
