Hi, Would help to know what commands you entered and what output you received. Can you please try again and copy/post the exact commands entered and the resulting output to the console.
Gary On Thursday, 3 September 2020 at 06:59:38 UTC+10 [email protected] wrote: > Apologies for resurrecting an old thread but I'm trying to do a fresh > install using the commands listed above, using Weewx 4.1.1 and the HP1000 > driver is not appearing in the list so it cannot be chosen. Has anything > fundamental changes between the previous and current weewx versions? > > Thanks > > On Tuesday, 15 October 2019 at 19:50:53 UTC+1 [email protected] wrote: > >> Finally, it's working. >> >> Thanks all for your help. >> >> >> On Tuesday, 15 October 2019 12:51:24 UTC+1, Matt wrote: >> >>> Hi All, >>> >>> First post. >>> >>> I got Weewx set up on a brand new Raspberry Pi 3 model B yesterday. I >>> saw that it was posting data but last night most of the data was incorrect >>> (e.g. outside temp 0 degrees C when it was actually 10 degrees). I decided >>> to leave it and went to bed. Today I am seeing better values but all >>> readings appear to be summing/appending to the previous reading. For >>> example, the temperature has risen from 0 to around 21 degrees very >>> uniformly. The actual temperature is around 13 degrees. >>> >>> I have an Aercus station, identical to Fine Offset HP1000. I have set >>> Weewx driver to both 'simulator' and 'Fine Offset' with no change in data. >>> >>> I read somewhere about an HP1000 driver written by aussie susan but >>> editing the daemon file was beyond my capabilities so I couldn't proceed >>> with it. >>> >>> My station can be seen at: https://www.pwsweather.com/obs/ILITTLEW9.html >>> # >>> >>> I appreciate that I will need to provide logs etc, but I am work at the >>> moment and will upload logs later. I just wanted to get the post up to see >>> if anyone had experienced anything similar or has any advice for a newbie. >>> >>> I love the functionality of weewx and look forward to using it. >>> >>> Many thanks in advance. >>> >>> Matt >>> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/f2e4d2f4-b757-41f2-9605-c00cd677d1edn%40googlegroups.com.
