It's not been updated and should not be used with Python 3. This is something I have on my 'to do' list but I must admit it is not the top priority.
On the other hand, the source is there if anyone else wants to have a go. Susan (HP1000 driver author) On Thursday, September 3, 2020 at 8:19:07 AM UTC+10, steeple ian wrote: > > Matt, > > Are you using Python2 or 3. > > The driver was last updated 11months ok and may not be compatible with > Python3 > > im. > > On Wed, 2 Sep 2020 at 23:08, [email protected] <[email protected] > <javascript:>> wrote: > >> This is what I'm seeing... >> >> >> pi@raspitest:~ $ cd /home/weewx/bin/user >> pi@raspitest:/home/weewx/bin/user $ dir >> extensions.py HP1000.py __init__.py installer __pycache__ >> pi@raspitest:/home/weewx/bin/user $ sudo nano HP1000.py >> >> # >> # Copyright (c) 2017 Susan Mackay >> # acknowledging that this driver code originated from and >> # is structured in a similar way to the Weewx 'Simulator' driver >> code >> # that carries the following line: >> # >> # >> # >> """hp1000 driver for the weewx weather system >> >> This driver communicates with the HP1000/WS1001/XC0422 and whatever other >> clone >> weather stations respond over the LAN to the 'easyweather' protocol. >> >> Communication starts with a UDP IP broadcast on the local subnet to port >> 6000 to >> see if the weather station responds. The broadcast packet is structured >> as: >> >> Offset Value Structure Comment >> 0x00 PC2000 8 byte string Identifies the calling station >> 0x08 SEARCH 8 byte string Command >> >> On Wednesday, 2 September 2020 at 23:03:15 UTC+1 [email protected] wrote: >> >>> Hi Gary, >>> >>> Yes to both questions. >>> >>> Thanks for your help >>> >>> On Wednesday, 2 September 2020 at 22:28:23 UTC+1 gjr80 wrote: >>> >>>> OK, let’s start with the obvious. Is HP1000.py in /home/weewx/bin/user >>>> and if you view the contents of the file is it legible code? >>>> >>>> Gary >>>> On Thursday, 3 September 2020 at 07:08:58 UTC+10 [email protected] >>>> wrote: >>>> >>>>> this is what i'm seeing >>>>> >>>>> pi@raspitest:/var/tmp $ sudo /home/weewx/bin/wee_extension >>>>> --install=/var/tmp/HP1000-master/HP1000.tar.gz >>>>> Request to install '/var/tmp/HP1000-master/HP1000.tar.gz' >>>>> Extracting from tar archive /var/tmp/HP1000-master/HP1000.tar.gz >>>>> Saving installer file to /home/weewx/bin/user/installer/HP1000 >>>>> Finished installing extension '/var/tmp/HP1000-master/HP1000.tar.gz' >>>>> pi@raspitest:/var/tmp $ /home/weewx/bin/wee_config --list-drivers >>>>> >>>>> Module name Driver name Version Status >>>>> weewx.drivers.acurite AcuRite 0.4 >>>>> weewx.drivers.cc3000 CC3000 0.40 >>>>> weewx.drivers.fousb FineOffsetUSB 1.20 >>>>> weewx.drivers.simulator Simulator 3.2 >>>>> weewx.drivers.te923 TE923 0.41 >>>>> weewx.drivers.ultimeter Ultimeter 0.41 >>>>> weewx.drivers.vantage Vantage 3.2.1 >>>>> weewx.drivers.wmr100 WMR100 3.5.0 >>>>> weewx.drivers.wmr200 WMR200 3.5.0 >>>>> weewx.drivers.wmr300 WMR300 0.33 >>>>> weewx.drivers.wmr9x8 WMR9x8 3.4.1 >>>>> weewx.drivers.ws1 WS1 0.41 >>>>> weewx.drivers.ws23xx WS23xx 0.41 >>>>> weewx.drivers.ws28xx WS28xx 0.51 >>>>> On Wednesday, 2 September 2020 at 21:59:38 UTC+1 [email protected] >>>>> wrote: >>>>> >>>>>> Apologies for resurrecting an old thread but I'm trying to do a fresh >>>>>> install using the commands listed above, using Weewx 4.1.1 and the >>>>>> HP1000 >>>>>> driver is not appearing in the list so it cannot be chosen. Has >>>>>> anything >>>>>> fundamental changes between the previous and current weewx versions? >>>>>> >>>>>> Thanks >>>>>> >>>>>> On Tuesday, 15 October 2019 at 19:50:53 UTC+1 [email protected] >>>>>> wrote: >>>>>> >>>>>>> Finally, it's working. >>>>>>> >>>>>>> Thanks all for your help. >>>>>>> >>>>>>> >>>>>>> On Tuesday, 15 October 2019 12:51:24 UTC+1, Matt wrote: >>>>>>> >>>>>>>> Hi All, >>>>>>>> >>>>>>>> First post. >>>>>>>> >>>>>>>> I got Weewx set up on a brand new Raspberry Pi 3 model B >>>>>>>> yesterday. I saw that it was posting data but last night most of the >>>>>>>> data >>>>>>>> was incorrect (e.g. outside temp 0 degrees C when it was actually 10 >>>>>>>> degrees). I decided to leave it and went to bed. Today I am seeing >>>>>>>> better >>>>>>>> values but all readings appear to be summing/appending to the previous >>>>>>>> reading. For example, the temperature has risen from 0 to around 21 >>>>>>>> degrees very uniformly. The actual temperature is around 13 degrees. >>>>>>>> >>>>>>>> I have an Aercus station, identical to Fine Offset HP1000. I have >>>>>>>> set Weewx driver to both 'simulator' and 'Fine Offset' with no change >>>>>>>> in >>>>>>>> data. >>>>>>>> >>>>>>>> I read somewhere about an HP1000 driver written by aussie susan but >>>>>>>> editing the daemon file was beyond my capabilities so I couldn't >>>>>>>> proceed >>>>>>>> with it. >>>>>>>> >>>>>>>> My station can be seen at: >>>>>>>> https://www.pwsweather.com/obs/ILITTLEW9.html# >>>>>>>> >>>>>>>> I appreciate that I will need to provide logs etc, but I am work at >>>>>>>> the moment and will upload logs later. I just wanted to get the post >>>>>>>> up to >>>>>>>> see if anyone had experienced anything similar or has any advice for a >>>>>>>> newbie. >>>>>>>> >>>>>>>> I love the functionality of weewx and look forward to using it. >>>>>>>> >>>>>>>> Many thanks in advance. >>>>>>>> >>>>>>>> Matt >>>>>>>> >>>>>>> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] <javascript:>. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/61d4972e-636d-4a4b-b60f-2512fe7b2137n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/weewx-user/61d4972e-636d-4a4b-b60f-2512fe7b2137n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/ee6f893b-6130-412e-a2be-11974e7f8e78o%40googlegroups.com.
