Matt, Are you using Python2 or 3.
The driver was last updated 11months ok and may not be compatible with Python3 im. On Wed, 2 Sep 2020 at 23:08, [email protected] <[email protected]> wrote: > This is what I'm seeing... > > > pi@raspitest:~ $ cd /home/weewx/bin/user > pi@raspitest:/home/weewx/bin/user $ dir > extensions.py HP1000.py __init__.py installer __pycache__ > pi@raspitest:/home/weewx/bin/user $ sudo nano HP1000.py > > # > # Copyright (c) 2017 Susan Mackay > # acknowledging that this driver code originated from and > # is structured in a similar way to the Weewx 'Simulator' driver code > # that carries the following line: > # > # > # > """hp1000 driver for the weewx weather system > > This driver communicates with the HP1000/WS1001/XC0422 and whatever other > clone > weather stations respond over the LAN to the 'easyweather' protocol. > > Communication starts with a UDP IP broadcast on the local subnet to port > 6000 to > see if the weather station responds. The broadcast packet is structured as: > > Offset Value Structure Comment > 0x00 PC2000 8 byte string Identifies the calling station > 0x08 SEARCH 8 byte string Command > > On Wednesday, 2 September 2020 at 23:03:15 UTC+1 [email protected] wrote: > >> Hi Gary, >> >> Yes to both questions. >> >> Thanks for your help >> >> On Wednesday, 2 September 2020 at 22:28:23 UTC+1 gjr80 wrote: >> >>> OK, let’s start with the obvious. Is HP1000.py in /home/weewx/bin/user >>> and if you view the contents of the file is it legible code? >>> >>> Gary >>> On Thursday, 3 September 2020 at 07:08:58 UTC+10 [email protected] >>> wrote: >>> >>>> this is what i'm seeing >>>> >>>> pi@raspitest:/var/tmp $ sudo /home/weewx/bin/wee_extension >>>> --install=/var/tmp/HP1000-master/HP1000.tar.gz >>>> Request to install '/var/tmp/HP1000-master/HP1000.tar.gz' >>>> Extracting from tar archive /var/tmp/HP1000-master/HP1000.tar.gz >>>> Saving installer file to /home/weewx/bin/user/installer/HP1000 >>>> Finished installing extension '/var/tmp/HP1000-master/HP1000.tar.gz' >>>> pi@raspitest:/var/tmp $ /home/weewx/bin/wee_config --list-drivers >>>> >>>> Module name Driver name Version Status >>>> weewx.drivers.acurite AcuRite 0.4 >>>> weewx.drivers.cc3000 CC3000 0.40 >>>> weewx.drivers.fousb FineOffsetUSB 1.20 >>>> weewx.drivers.simulator Simulator 3.2 >>>> weewx.drivers.te923 TE923 0.41 >>>> weewx.drivers.ultimeter Ultimeter 0.41 >>>> weewx.drivers.vantage Vantage 3.2.1 >>>> weewx.drivers.wmr100 WMR100 3.5.0 >>>> weewx.drivers.wmr200 WMR200 3.5.0 >>>> weewx.drivers.wmr300 WMR300 0.33 >>>> weewx.drivers.wmr9x8 WMR9x8 3.4.1 >>>> weewx.drivers.ws1 WS1 0.41 >>>> weewx.drivers.ws23xx WS23xx 0.41 >>>> weewx.drivers.ws28xx WS28xx 0.51 >>>> On Wednesday, 2 September 2020 at 21:59:38 UTC+1 [email protected] >>>> wrote: >>>> >>>>> Apologies for resurrecting an old thread but I'm trying to do a fresh >>>>> install using the commands listed above, using Weewx 4.1.1 and the HP1000 >>>>> driver is not appearing in the list so it cannot be chosen. Has anything >>>>> fundamental changes between the previous and current weewx versions? >>>>> >>>>> Thanks >>>>> >>>>> On Tuesday, 15 October 2019 at 19:50:53 UTC+1 [email protected] wrote: >>>>> >>>>>> Finally, it's working. >>>>>> >>>>>> Thanks all for your help. >>>>>> >>>>>> >>>>>> On Tuesday, 15 October 2019 12:51:24 UTC+1, Matt wrote: >>>>>> >>>>>>> Hi All, >>>>>>> >>>>>>> First post. >>>>>>> >>>>>>> I got Weewx set up on a brand new Raspberry Pi 3 model B yesterday. >>>>>>> I saw that it was posting data but last night most of the data was >>>>>>> incorrect (e.g. outside temp 0 degrees C when it was actually 10 >>>>>>> degrees). >>>>>>> I decided to leave it and went to bed. Today I am seeing better values >>>>>>> but >>>>>>> all readings appear to be summing/appending to the previous reading. >>>>>>> For >>>>>>> example, the temperature has risen from 0 to around 21 degrees very >>>>>>> uniformly. The actual temperature is around 13 degrees. >>>>>>> >>>>>>> I have an Aercus station, identical to Fine Offset HP1000. I have >>>>>>> set Weewx driver to both 'simulator' and 'Fine Offset' with no change in >>>>>>> data. >>>>>>> >>>>>>> I read somewhere about an HP1000 driver written by aussie susan but >>>>>>> editing the daemon file was beyond my capabilities so I couldn't proceed >>>>>>> with it. >>>>>>> >>>>>>> My station can be seen at: >>>>>>> https://www.pwsweather.com/obs/ILITTLEW9.html# >>>>>>> >>>>>>> I appreciate that I will need to provide logs etc, but I am work at >>>>>>> the moment and will upload logs later. I just wanted to get the post >>>>>>> up to >>>>>>> see if anyone had experienced anything similar or has any advice for a >>>>>>> newbie. >>>>>>> >>>>>>> I love the functionality of weewx and look forward to using it. >>>>>>> >>>>>>> Many thanks in advance. >>>>>>> >>>>>>> Matt >>>>>>> >>>>>> -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/61d4972e-636d-4a4b-b60f-2512fe7b2137n%40googlegroups.com > <https://groups.google.com/d/msgid/weewx-user/61d4972e-636d-4a4b-b60f-2512fe7b2137n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CADASSaS5tHw4Tj4aOL14trn12-wTj_Ao%3D2-90JiU-u9wM2ezKw%40mail.gmail.com.
