Hi Everyone,

I just can seem to get my WeeWX to run smoothly. I installed everything and 
it was running fine a month ago (in the office). So thinking everything was 
good I deployed the weather station (Davis Vantage Vue) outside for a 
month. 
When I tried to look for the data the archive stopped before I deployed the 
logger outside but in the office, it worked again. So I deployed it again 
and the something but now it doesn't want to work at all. 

I reinstalled Weewx but no luck even formatted the SD card and reinstalled 
but no luck. 

Is there something I am missing? 



On Wednesday, August 26, 2020 at 7:25:58 AM UTC+12 [email protected] wrote:

> Think I have this solved now. Finally found that the Weewx install would 
> not work because I have a Davis Weatherlink Live in use. Had to add another 
> driver for WLL. Found this at https://github.com/jonotaegi/weewx-wll. 
> Thanks to Vince here and jonotaegi
>
> On Tuesday, August 25, 2020 at 11:25:06 AM UTC-7 Dennis Clark wrote:
>
>> Always a possibility but I have gone back in terminal to review all my 
>> commands and it looks like sudo was always used. using ssh for everything 
>> as I dont have an external monitor.
>>
>> i.e. sudo apt-get install weewx
>> Went through the setup dialogs then
>>
>> sudo tail -f /var/log/syslog. was used to get errors shown in last post.
>>
>>
>> I am at the point of doing a fresh install of the pi followed by all the 
>> weewx install steps again.
>>
>>
>>
>> On Tuesday, August 25, 2020 at 11:16:53 AM UTC-7 vince wrote:
>>
>>> On Tuesday, August 25, 2020 at 9:11:55 AM UTC-7, Dennis Clark wrote:
>>>>
>>>> So yes, found I omitted the comma between latitude and longitude. Tried 
>>>> a new install with correctly added comma and now it apperas I may have it 
>>>> narrowed down to some sort of permissions error???
>>>> When I did a manual weeconfig --reconfigure to check things out it 
>>>> errors after entering the IP of my Weatherlink.
>>>> Any thoughts ?
>>>>
>>>>
>>> Permission denied on a pi, for new pi users especially, is always the 
>>> user forgetting to preface their commands with 'sudo' 
>>>
>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/30ae73d3-f9a0-44dd-acfb-d12cc2bce164n%40googlegroups.com.

Reply via email to