What seems to be the problem? The log looks totally normal to me. HTML pages are getting generated and put in /home/weewx/public_html
Any particular reason you're using software record generation? -tk On Thu, Sep 3, 2020 at 1:40 PM [email protected] < [email protected]> wrote: > Apologies - attached is the log file... > > On Thursday, September 3, 2020 at 7:10:49 PM UTC+12 [email protected] > wrote: > >> what does the log say??? >> >> >> >> On Thursday, 3 September 2020 08:21:00 UTC+3, [email protected] wrote: >>> >>> Hi Everyone, >>> >>> I just can seem to get my WeeWX to run smoothly. I installed everything >>> and it was running fine a month ago (in the office). So thinking everything >>> was good I deployed the weather station (Davis Vantage Vue) outside for a >>> month. >>> When I tried to look for the data the archive stopped before I deployed >>> the logger outside but in the office, it worked again. So I deployed it >>> again and the something but now it doesn't want to work at all. >>> >>> I reinstalled Weewx but no luck even formatted the SD card and >>> reinstalled but no luck. >>> >>> Is there something I am missing? >>> >>> >>> >>> On Wednesday, August 26, 2020 at 7:25:58 AM UTC+12 [email protected] >>> wrote: >>> >>>> Think I have this solved now. Finally found that the Weewx install >>>> would not work because I have a Davis Weatherlink Live in use. Had to add >>>> another driver for WLL. Found this at >>>> https://github.com/jonotaegi/weewx-wll. Thanks to Vince here and >>>> jonotaegi >>>> >>>> On Tuesday, August 25, 2020 at 11:25:06 AM UTC-7 Dennis Clark wrote: >>>> >>>>> Always a possibility but I have gone back in terminal to review all my >>>>> commands and it looks like sudo was always used. using ssh for everything >>>>> as I dont have an external monitor. >>>>> >>>>> i.e. sudo apt-get install weewx >>>>> Went through the setup dialogs then >>>>> >>>>> sudo tail -f /var/log/syslog. was used to get errors shown in last >>>>> post. >>>>> >>>>> >>>>> I am at the point of doing a fresh install of the pi followed by all >>>>> the weewx install steps again. >>>>> >>>>> >>>>> >>>>> On Tuesday, August 25, 2020 at 11:16:53 AM UTC-7 vince wrote: >>>>> >>>>>> On Tuesday, August 25, 2020 at 9:11:55 AM UTC-7, Dennis Clark wrote: >>>>>>> >>>>>>> So yes, found I omitted the comma between latitude and longitude. >>>>>>> Tried a new install with correctly added comma and now it apperas I may >>>>>>> have it narrowed down to some sort of permissions error??? >>>>>>> When I did a manual weeconfig --reconfigure to check things out it >>>>>>> errors after entering the IP of my Weatherlink. >>>>>>> Any thoughts ? >>>>>>> >>>>>>> >>>>>> Permission denied on a pi, for new pi users especially, is always the >>>>>> user forgetting to preface their commands with 'sudo' >>>>>> >>>>> -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/e1f33e20-1a79-4d1b-ba68-1cd77065e37bn%40googlegroups.com > <https://groups.google.com/d/msgid/weewx-user/e1f33e20-1a79-4d1b-ba68-1cd77065e37bn%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CAPq0zEBXwoHPpGNCufxh1Peb36Tsz-S_sZSkHXu%2BSzz6sJWmkA%40mail.gmail.com.
