what does the log say???
On Thursday, 3 September 2020 08:21:00 UTC+3, [email protected] wrote: > > Hi Everyone, > > I just can seem to get my WeeWX to run smoothly. I installed everything > and it was running fine a month ago (in the office). So thinking everything > was good I deployed the weather station (Davis Vantage Vue) outside for a > month. > When I tried to look for the data the archive stopped before I deployed > the logger outside but in the office, it worked again. So I deployed it > again and the something but now it doesn't want to work at all. > > I reinstalled Weewx but no luck even formatted the SD card and reinstalled > but no luck. > > Is there something I am missing? > > > > On Wednesday, August 26, 2020 at 7:25:58 AM UTC+12 [email protected] > wrote: > >> Think I have this solved now. Finally found that the Weewx install would >> not work because I have a Davis Weatherlink Live in use. Had to add another >> driver for WLL. Found this at https://github.com/jonotaegi/weewx-wll. >> Thanks to Vince here and jonotaegi >> >> On Tuesday, August 25, 2020 at 11:25:06 AM UTC-7 Dennis Clark wrote: >> >>> Always a possibility but I have gone back in terminal to review all my >>> commands and it looks like sudo was always used. using ssh for everything >>> as I dont have an external monitor. >>> >>> i.e. sudo apt-get install weewx >>> Went through the setup dialogs then >>> >>> sudo tail -f /var/log/syslog. was used to get errors shown in last post. >>> >>> >>> I am at the point of doing a fresh install of the pi followed by all the >>> weewx install steps again. >>> >>> >>> >>> On Tuesday, August 25, 2020 at 11:16:53 AM UTC-7 vince wrote: >>> >>>> On Tuesday, August 25, 2020 at 9:11:55 AM UTC-7, Dennis Clark wrote: >>>>> >>>>> So yes, found I omitted the comma between latitude and longitude. >>>>> Tried a new install with correctly added comma and now it apperas I may >>>>> have it narrowed down to some sort of permissions error??? >>>>> When I did a manual weeconfig --reconfigure to check things out it >>>>> errors after entering the IP of my Weatherlink. >>>>> Any thoughts ? >>>>> >>>>> >>>> Permission denied on a pi, for new pi users especially, is always the >>>> user forgetting to preface their commands with 'sudo' >>>> >>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/fc9290b3-345e-475a-b0e2-94c1ebee3690o%40googlegroups.com.
