Hi Gary,
I'm using Davis Vantage Vue, so Davis' driver. The skin in neowx.
Here are few LOOP and one REC package. As far as I see both temperatures
are provided in F.
LOOP: 2021-07-21 10:00:16 CEST (1626854416) altimeter: 30.0362696612,
appTemp: 83.9711652735, barometer: 30.032, cloudbase: 4675.84812603,
consBatteryVoltage: 4.44, dateTime: 1626854416, dayET: 0.0, dayRain: 0.0,
dewpoint: 61.0462682455, extraAlarm1: 0, extraAlarm2: 0, extraAlarm3: 0,
extraAlarm4: 0, extraAlarm5: 0, extraAlarm6: 0, extraAlarm7: 0,
extraAlarm8: 0, forecastIcon: 6, forecastRule: 44, heatindex:
81.2791612491, humidex: 88.7588174669, inDewpoint: 57.9925092852,
inHumidity: 45.0, insideAlarm: 0, inTemp: 81.4, leafWet4: 0.0, maxSolarRad:
661.218396019, monthET: 0.0, monthRain: 2.6299212605, outHumidity: 52.0,
outsideAlarm1: 0, outsideAlarm2: 0, outTemp: 80.3, pressure: 29.7210291893,
rain: 0.0, rainAlarm: 0, rainRate: 0.0, soilLeafAlarm1: 0, soilLeafAlarm2:
0, soilLeafAlarm3: 0, soilLeafAlarm4: 0, stormRain: 0.25984251975,
stormStart: 1626732000, sunrise: 1626845100, sunset: 1626899760, trendIcon:
20, txBatteryStatus: 0, usUnits: 1, windchill: 80.3, windDir: None,
windGust: 1.0, windGustDir: 82.0, windSpeed: 0.0, windSpeed10: 2.0, yearET:
0.0, yearRain: 27.8346456762
REC: 2021-07-21 10:00:00 CEST (1626854400) altimeter: 30.0362696612,
appTemp: 83.4078962735, barometer: 30.032, cloudbase: 4675.84812603,
consBatteryVoltage: 4.44, dateTime: 1626854400, dayET: 0.0, dayRain: 0.0,
dewpoint: 61.0462682455, ET: 0.0, extraAlarm1: 0.0, extraAlarm2: 0.0,
extraAlarm3: 0.0, extraAlarm4: 0.0, extraAlarm5: 0.0, extraAlarm6: 0.0,
extraAlarm7: 0.0, extraAlarm8: 0.0, extraTemp1: 100.4, forecastIcon: 6.0,
forecastRule: 44, heatindex: 81.2791612491, highOutTemp: 80.3, humidex:
88.7588174669, inDewpoint: 57.9925092852, inHumidity: 45.0, insideAlarm:
0.0, inTemp: 81.4, interval: 1, leafTemp1: -90.0, leafTemp2: -82.0,
leafWet1: 6.6, leafWet2: 7.6, leafWet4: 0.0, lowOutTemp: 80.2, maxSolarRad:
660.504969787, monthET: 0.0, monthRain: 2.6299212605, outHumidity: 52.0,
outsideAlarm1: 0.0, outsideAlarm2: 0.0, outTemp: 80.3, pressure:
29.7210291893, radiation: 490.0, rain: 0.0, rainAlarm: 0.0, rainRate: 0.0,
rxCheckPercent: 98.2291666667, soilLeafAlarm1: 0.0, soilLeafAlarm2: 0.0,
soilLeafAlarm3: 0.0, soilLeafAlarm4: 0.0, soilMoist1: 1021.0, soilMoist2:
2614.0, soilMoist3: 0.0, soilMoist4: 32.0, soilTemp1: 73.85, soilTemp2:
73.29, soilTemp3: -90.0, soilTemp4: -90.0, stormRain: 0.25984251975,
stormStart: 1626732000.0, strele: 0.0, sunrise: 1626845100.0, sunset:
1626899760.0, trendIcon: 20.0, txBatteryStatus: 0, usUnits: 1, windchill:
80.3, windDir: 90.0, windGust: 3.0, windGustDir: 90.0, windrun:
0.0166666666667, windSpeed: 1.0, windSpeed10: 2.0, yearET: 0.0, yearRain:
27.8346456762
LOOP: 2021-07-21 10:00:18 CEST (1626854418) altimeter: 30.0362696612,
appTemp: 83.9711652735, barometer: 30.032, cloudbase: 4675.84812603,
consBatteryVoltage: 4.44, dateTime: 1626854418, dayET: 0.0, dayRain: 0.0,
dewpoint: 61.0462682455, extraAlarm1: 0, extraAlarm2: 0, extraAlarm3: 0,
extraAlarm4: 0, extraAlarm5: 0, extraAlarm6: 0, extraAlarm7: 0,
extraAlarm8: 0, forecastIcon: 6, forecastRule: 44, heatindex:
81.2791612491, humidex: 88.7588174669, inDewpoint: 57.9925092852,
inHumidity: 45.0, insideAlarm: 0, inTemp: 81.4, leafWet4: 0.0, maxSolarRad:
661.307473419, monthET: 0.0, monthRain: 2.6299212605, outHumidity: 52.0,
outsideAlarm1: 0, outsideAlarm2: 0, outTemp: 80.3, pressure: 29.7210291893,
rain: 0.0, rainAlarm: 0, rainRate: 0.0, soilLeafAlarm1: 0, soilLeafAlarm2:
0, soilLeafAlarm3: 0, soilLeafAlarm4: 0, stormRain: 0.25984251975,
stormStart: 1626732000, sunrise: 1626845100, sunset: 1626899760, trendIcon:
20, txBatteryStatus: 0, usUnits: 1, windchill: 80.3, windDir: None,
windGust: 1.0, windGustDir: 82.0, windSpeed: 0.0, windSpeed10: 2.0, yearET:
0.0, yearRain: 27.8346456762
Here is the definition of the units in the weewx.conf file:
[[Defaults]]
[[[Units]]]
# The following section sets what unit to use for each unit
group.
# NB: The unit is always in the singular. I.e., 'mile_per_hour',
# NOT 'miles_per_hour'
[[[[Groups]]]]
group_altitude = meter # Options are 'foot' or 'meter'
group_degree_day = degree_C_day # Options are
'degree_F_day' or 'degree_C_day'
group_pressure = mbar # Options are 'inHg', 'mmHg',
'mbar', or 'hPa'
group_rain = mm # Options are 'inch', 'cm', or 'mm'
group_rainrate = mm_per_hour # Options are
'inch_per_hour', 'cm_per_hour', or 'mm_per_hour'
group_speed = km_per_hour # Options are 'mile_per_hour',
'km_per_hour', 'knot', or 'meter_per_second'
group_speed2 = km_per_hour2 # Options are
'mile_per_hour2', 'km_per_hour2', 'knot2', or 'meter_per_second2'
group_temperature = degree_C # Options are 'degree_F' or
'degree_C'
group_distance = km
group_hailrate = min
Please note that I'm using some fields (e.g. hailrate, etc.) for other
sensor values (radioactivity, gamma rays, etc.).
Also, the daily, weekly and monthly plots of the InTemp all show Celsius.
Thanks.
sreda, 21. julij 2021 ob 09:06:56 UTC+2 je oseba gjr80 napisala:
> This could have any one of a number of causes. A few questions:
>
> - what skin is this, Seasons? Standard? or something else?
> - what driver are you using? Does it provide both inTemp and outTemp?
> - try running WeeWX directly
> <http://weewx.com/docs/usersguide.htm#Running_directly>, you should
> see loop packets (LOOP:) and archive records (REC:) appearing on screen.
> Confirm that inTemp and outTemp are both using the same units. Post a
> copy of some loop packets here if you are unsure what you are looking
> at/for.
>
> Gary
>
> On Wednesday, 21 July 2021 at 16:37:10 UTC+10 mihec wrote:
>
>> Hi,
>> I've noticed this time ago but never reported. My default temperature
>> unit is Celsius. I'm plotting the inside temperature (InTemp) and all
>> (day,week,month) except the yearly plots the units are Celsius. Only in the
>> yearly plot, the units are Fahrenheit.
>>
>> This is an excerpt from the skin.conf:
>>
>> [[[yearhilowinsidetemp]]]
>> [[[[hi]]]]
>> data_type = InTemp
>> aggregate_type = max
>> label = Najvišja
>> [[[[low]]]]
>> data_type = InTemp
>> aggregate_type = min
>> label = Najnižja
>>
>> The yearly plot for the outTemp uses Celsius correctly.
>> I'm using weewx version 3.9.2
>>
>> Is there any workaround?
>>
>> thanks.
>>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/df82a0f0-8e2a-42c9-afb1-4c09eb4904e6n%40googlegroups.com.
