I had to check until now so the yearly plots are refreshed. Thanks much, Gary! The case does matter indeed! Problem solved.
sreda, 21. julij 2021 ob 10:33:41 UTC+2 je oseba gjr80 napisala: > OK, some folks have hybrid systems with, for example, outdoor obs coming > from sensors via SDR and indoor obs coming from somewhere else and at time > they can have unit issues. But you are using the vantage driver where > everything is provided by the one driver/station. Your inTemp and outTemp > obviously agree so any subsequent conversions would result in the same > units. Nothing else looks unusual. > > Just looked again at your skin.conf extract, are you using InTemp or > inTemp. I would have thought it should be inTemp, case matters here. > > Gary > On Wednesday, 21 July 2021 at 18:07:34 UTC+10 mihec wrote: > >> Hi Gary, >> >> I'm using Davis Vantage Vue, so Davis' driver. The skin in neowx. >> Here are few LOOP and one REC package. As far as I see both temperatures >> are provided in F. >> >> LOOP: 2021-07-21 10:00:16 CEST (1626854416) altimeter: 30.0362696612, >> appTemp: 83.9711652735, barometer: 30.032, cloudbase: 4675.84812603, >> consBatteryVoltage: 4.44, dateTime: 1626854416, dayET: 0.0, dayRain: 0.0, >> dewpoint: 61.0462682455, extraAlarm1: 0, extraAlarm2: 0, extraAlarm3: 0, >> extraAlarm4: 0, extraAlarm5: 0, extraAlarm6: 0, extraAlarm7: 0, >> extraAlarm8: 0, forecastIcon: 6, forecastRule: 44, heatindex: >> 81.2791612491, humidex: 88.7588174669, inDewpoint: 57.9925092852, >> inHumidity: 45.0, insideAlarm: 0, inTemp: 81.4, leafWet4: 0.0, maxSolarRad: >> 661.218396019, monthET: 0.0, monthRain: 2.6299212605, outHumidity: 52.0, >> outsideAlarm1: 0, outsideAlarm2: 0, outTemp: 80.3, pressure: 29.7210291893, >> rain: 0.0, rainAlarm: 0, rainRate: 0.0, soilLeafAlarm1: 0, soilLeafAlarm2: >> 0, soilLeafAlarm3: 0, soilLeafAlarm4: 0, stormRain: 0.25984251975, >> stormStart: 1626732000, sunrise: 1626845100, sunset: 1626899760, trendIcon: >> 20, txBatteryStatus: 0, usUnits: 1, windchill: 80.3, windDir: None, >> windGust: 1.0, windGustDir: 82.0, windSpeed: 0.0, windSpeed10: 2.0, yearET: >> 0.0, yearRain: 27.8346456762 >> REC: 2021-07-21 10:00:00 CEST (1626854400) altimeter: 30.0362696612, >> appTemp: 83.4078962735 <(407)%20896-2735>, barometer: 30.032, cloudbase: >> 4675.84812603, consBatteryVoltage: 4.44, dateTime: 1626854400, dayET: 0.0, >> dayRain: 0.0, dewpoint: 61.0462682455, ET: 0.0, extraAlarm1: 0.0, >> extraAlarm2: 0.0, extraAlarm3: 0.0, extraAlarm4: 0.0, extraAlarm5: 0.0, >> extraAlarm6: 0.0, extraAlarm7: 0.0, extraAlarm8: 0.0, extraTemp1: 100.4, >> forecastIcon: 6.0, forecastRule: 44, heatindex: 81.2791612491, highOutTemp: >> 80.3, humidex: 88.7588174669, inDewpoint: 57.9925092852, inHumidity: 45.0, >> insideAlarm: 0.0, inTemp: 81.4, interval: 1, leafTemp1: -90.0, leafTemp2: >> -82.0, leafWet1: 6.6, leafWet2: 7.6, leafWet4: 0.0, lowOutTemp: 80.2, >> maxSolarRad: 660.504969787, monthET: 0.0, monthRain: 2.6299212605, >> outHumidity: 52.0, outsideAlarm1: 0.0, outsideAlarm2: 0.0, outTemp: 80.3, >> pressure: 29.7210291893, radiation: 490.0, rain: 0.0, rainAlarm: 0.0, >> rainRate: 0.0, rxCheckPercent: 98.2291666667, soilLeafAlarm1: 0.0, >> soilLeafAlarm2: 0.0, soilLeafAlarm3: 0.0, soilLeafAlarm4: 0.0, soilMoist1: >> 1021.0, soilMoist2: 2614.0, soilMoist3: 0.0, soilMoist4: 32.0, soilTemp1: >> 73.85, soilTemp2: 73.29, soilTemp3: -90.0, soilTemp4: -90.0, stormRain: >> 0.25984251975, stormStart: 1626732000.0, strele: 0.0, sunrise: >> 1626845100.0, sunset: 1626899760.0, trendIcon: 20.0, txBatteryStatus: 0, >> usUnits: 1, windchill: 80.3, windDir: 90.0, windGust: 3.0, windGustDir: >> 90.0, windrun: 0.0166666666667, windSpeed: 1.0, windSpeed10: 2.0, yearET: >> 0.0, yearRain: 27.8346456762 >> LOOP: 2021-07-21 10:00:18 CEST (1626854418) altimeter: 30.0362696612, >> appTemp: 83.9711652735, barometer: 30.032, cloudbase: 4675.84812603, >> consBatteryVoltage: 4.44, dateTime: 1626854418, dayET: 0.0, dayRain: 0.0, >> dewpoint: 61.0462682455, extraAlarm1: 0, extraAlarm2: 0, extraAlarm3: 0, >> extraAlarm4: 0, extraAlarm5: 0, extraAlarm6: 0, extraAlarm7: 0, >> extraAlarm8: 0, forecastIcon: 6, forecastRule: 44, heatindex: >> 81.2791612491, humidex: 88.7588174669, inDewpoint: 57.9925092852, >> inHumidity: 45.0, insideAlarm: 0, inTemp: 81.4, leafWet4: 0.0, maxSolarRad: >> 661.307473419, monthET: 0.0, monthRain: 2.6299212605, outHumidity: 52.0, >> outsideAlarm1: 0, outsideAlarm2: 0, outTemp: 80.3, pressure: 29.7210291893, >> rain: 0.0, rainAlarm: 0, rainRate: 0.0, soilLeafAlarm1: 0, soilLeafAlarm2: >> 0, soilLeafAlarm3: 0, soilLeafAlarm4: 0, stormRain: 0.25984251975, >> stormStart: 1626732000, sunrise: 1626845100, sunset: 1626899760, trendIcon: >> 20, txBatteryStatus: 0, usUnits: 1, windchill: 80.3, windDir: None, >> windGust: 1.0, windGustDir: 82.0, windSpeed: 0.0, windSpeed10: 2.0, yearET: >> 0.0, yearRain: 27.8346456762 >> >> Here is the definition of the units in the weewx.conf file: >> [[Defaults]] >> >> [[[Units]]] >> >> # The following section sets what unit to use for each unit >> group. >> # NB: The unit is always in the singular. I.e., >> 'mile_per_hour', >> # NOT 'miles_per_hour' >> [[[[Groups]]]] >> >> group_altitude = meter # Options are 'foot' or 'meter' >> group_degree_day = degree_C_day # Options are >> 'degree_F_day' or 'degree_C_day' >> group_pressure = mbar # Options are 'inHg', 'mmHg', >> 'mbar', or 'hPa' >> group_rain = mm # Options are 'inch', 'cm', or 'mm' >> group_rainrate = mm_per_hour # Options are >> 'inch_per_hour', 'cm_per_hour', or 'mm_per_hour' >> group_speed = km_per_hour # Options are >> 'mile_per_hour', 'km_per_hour', 'knot', or 'meter_per_second' >> group_speed2 = km_per_hour2 # Options are >> 'mile_per_hour2', 'km_per_hour2', 'knot2', or 'meter_per_second2' >> group_temperature = degree_C # Options are 'degree_F' >> or 'degree_C' >> group_distance = km >> group_hailrate = min >> >> Please note that I'm using some fields (e.g. hailrate, etc.) for other >> sensor values (radioactivity, gamma rays, etc.). >> Also, the daily, weekly and monthly plots of the InTemp all show Celsius. >> >> Thanks. >> sreda, 21. julij 2021 ob 09:06:56 UTC+2 je oseba gjr80 napisala: >> >>> This could have any one of a number of causes. A few questions: >>> >>> - what skin is this, Seasons? Standard? or something else? >>> - what driver are you using? Does it provide both inTemp and outTemp? >>> - try running WeeWX directly >>> <http://weewx.com/docs/usersguide.htm#Running_directly>, you should >>> see loop packets (LOOP:) and archive records (REC:) appearing on screen. >>> Confirm that inTemp and outTemp are both using the same units. Post >>> a copy of some loop packets here if you are unsure what you are looking >>> at/for. >>> >>> Gary >>> >>> On Wednesday, 21 July 2021 at 16:37:10 UTC+10 mihec wrote: >>> >>>> Hi, >>>> I've noticed this time ago but never reported. My default temperature >>>> unit is Celsius. I'm plotting the inside temperature (InTemp) and all >>>> (day,week,month) except the yearly plots the units are Celsius. Only in >>>> the >>>> yearly plot, the units are Fahrenheit. >>>> >>>> This is an excerpt from the skin.conf: >>>> >>>> [[[yearhilowinsidetemp]]] >>>> [[[[hi]]]] >>>> data_type = InTemp >>>> aggregate_type = max >>>> label = Najvišja >>>> [[[[low]]]] >>>> data_type = InTemp >>>> aggregate_type = min >>>> label = Najnižja >>>> >>>> The yearly plot for the outTemp uses Celsius correctly. >>>> I'm using weewx version 3.9.2 >>>> >>>> Is there any workaround? >>>> >>>> thanks. >>>> >>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/9111026a-beae-4cc0-9f79-e8f483fd5b0cn%40googlegroups.com.
