OK, some folks have hybrid systems with, for example, outdoor obs coming from sensors via SDR and indoor obs coming from somewhere else and at time they can have unit issues. But you are using the vantage driver where everything is provided by the one driver/station. Your inTemp and outTemp obviously agree so any subsequent conversions would result in the same units. Nothing else looks unusual.
Just looked again at your skin.conf extract, are you using InTemp or inTemp. I would have thought it should be inTemp, case matters here. Gary On Wednesday, 21 July 2021 at 18:07:34 UTC+10 mihec wrote: > Hi Gary, > > I'm using Davis Vantage Vue, so Davis' driver. The skin in neowx. > Here are few LOOP and one REC package. As far as I see both temperatures > are provided in F. > > LOOP: 2021-07-21 10:00:16 CEST (1626854416) altimeter: 30.0362696612, > appTemp: 83.9711652735, barometer: 30.032, cloudbase: 4675.84812603, > consBatteryVoltage: 4.44, dateTime: 1626854416, dayET: 0.0, dayRain: 0.0, > dewpoint: 61.0462682455, extraAlarm1: 0, extraAlarm2: 0, extraAlarm3: 0, > extraAlarm4: 0, extraAlarm5: 0, extraAlarm6: 0, extraAlarm7: 0, > extraAlarm8: 0, forecastIcon: 6, forecastRule: 44, heatindex: > 81.2791612491, humidex: 88.7588174669, inDewpoint: 57.9925092852, > inHumidity: 45.0, insideAlarm: 0, inTemp: 81.4, leafWet4: 0.0, maxSolarRad: > 661.218396019, monthET: 0.0, monthRain: 2.6299212605, outHumidity: 52.0, > outsideAlarm1: 0, outsideAlarm2: 0, outTemp: 80.3, pressure: 29.7210291893, > rain: 0.0, rainAlarm: 0, rainRate: 0.0, soilLeafAlarm1: 0, soilLeafAlarm2: > 0, soilLeafAlarm3: 0, soilLeafAlarm4: 0, stormRain: 0.25984251975, > stormStart: 1626732000, sunrise: 1626845100, sunset: 1626899760, trendIcon: > 20, txBatteryStatus: 0, usUnits: 1, windchill: 80.3, windDir: None, > windGust: 1.0, windGustDir: 82.0, windSpeed: 0.0, windSpeed10: 2.0, yearET: > 0.0, yearRain: 27.8346456762 > REC: 2021-07-21 10:00:00 CEST (1626854400) altimeter: 30.0362696612, > appTemp: 83.4078962735 <(407)%20896-2735>, barometer: 30.032, cloudbase: > 4675.84812603, consBatteryVoltage: 4.44, dateTime: 1626854400, dayET: 0.0, > dayRain: 0.0, dewpoint: 61.0462682455, ET: 0.0, extraAlarm1: 0.0, > extraAlarm2: 0.0, extraAlarm3: 0.0, extraAlarm4: 0.0, extraAlarm5: 0.0, > extraAlarm6: 0.0, extraAlarm7: 0.0, extraAlarm8: 0.0, extraTemp1: 100.4, > forecastIcon: 6.0, forecastRule: 44, heatindex: 81.2791612491, highOutTemp: > 80.3, humidex: 88.7588174669, inDewpoint: 57.9925092852, inHumidity: 45.0, > insideAlarm: 0.0, inTemp: 81.4, interval: 1, leafTemp1: -90.0, leafTemp2: > -82.0, leafWet1: 6.6, leafWet2: 7.6, leafWet4: 0.0, lowOutTemp: 80.2, > maxSolarRad: 660.504969787, monthET: 0.0, monthRain: 2.6299212605, > outHumidity: 52.0, outsideAlarm1: 0.0, outsideAlarm2: 0.0, outTemp: 80.3, > pressure: 29.7210291893, radiation: 490.0, rain: 0.0, rainAlarm: 0.0, > rainRate: 0.0, rxCheckPercent: 98.2291666667, soilLeafAlarm1: 0.0, > soilLeafAlarm2: 0.0, soilLeafAlarm3: 0.0, soilLeafAlarm4: 0.0, soilMoist1: > 1021.0, soilMoist2: 2614.0, soilMoist3: 0.0, soilMoist4: 32.0, soilTemp1: > 73.85, soilTemp2: 73.29, soilTemp3: -90.0, soilTemp4: -90.0, stormRain: > 0.25984251975, stormStart: 1626732000.0, strele: 0.0, sunrise: > 1626845100.0, sunset: 1626899760.0, trendIcon: 20.0, txBatteryStatus: 0, > usUnits: 1, windchill: 80.3, windDir: 90.0, windGust: 3.0, windGustDir: > 90.0, windrun: 0.0166666666667, windSpeed: 1.0, windSpeed10: 2.0, yearET: > 0.0, yearRain: 27.8346456762 > LOOP: 2021-07-21 10:00:18 CEST (1626854418) altimeter: 30.0362696612, > appTemp: 83.9711652735, barometer: 30.032, cloudbase: 4675.84812603, > consBatteryVoltage: 4.44, dateTime: 1626854418, dayET: 0.0, dayRain: 0.0, > dewpoint: 61.0462682455, extraAlarm1: 0, extraAlarm2: 0, extraAlarm3: 0, > extraAlarm4: 0, extraAlarm5: 0, extraAlarm6: 0, extraAlarm7: 0, > extraAlarm8: 0, forecastIcon: 6, forecastRule: 44, heatindex: > 81.2791612491, humidex: 88.7588174669, inDewpoint: 57.9925092852, > inHumidity: 45.0, insideAlarm: 0, inTemp: 81.4, leafWet4: 0.0, maxSolarRad: > 661.307473419, monthET: 0.0, monthRain: 2.6299212605, outHumidity: 52.0, > outsideAlarm1: 0, outsideAlarm2: 0, outTemp: 80.3, pressure: 29.7210291893, > rain: 0.0, rainAlarm: 0, rainRate: 0.0, soilLeafAlarm1: 0, soilLeafAlarm2: > 0, soilLeafAlarm3: 0, soilLeafAlarm4: 0, stormRain: 0.25984251975, > stormStart: 1626732000, sunrise: 1626845100, sunset: 1626899760, trendIcon: > 20, txBatteryStatus: 0, usUnits: 1, windchill: 80.3, windDir: None, > windGust: 1.0, windGustDir: 82.0, windSpeed: 0.0, windSpeed10: 2.0, yearET: > 0.0, yearRain: 27.8346456762 > > Here is the definition of the units in the weewx.conf file: > [[Defaults]] > > [[[Units]]] > > # The following section sets what unit to use for each unit > group. > # NB: The unit is always in the singular. I.e., > 'mile_per_hour', > # NOT 'miles_per_hour' > [[[[Groups]]]] > > group_altitude = meter # Options are 'foot' or 'meter' > group_degree_day = degree_C_day # Options are > 'degree_F_day' or 'degree_C_day' > group_pressure = mbar # Options are 'inHg', 'mmHg', > 'mbar', or 'hPa' > group_rain = mm # Options are 'inch', 'cm', or 'mm' > group_rainrate = mm_per_hour # Options are > 'inch_per_hour', 'cm_per_hour', or 'mm_per_hour' > group_speed = km_per_hour # Options are > 'mile_per_hour', 'km_per_hour', 'knot', or 'meter_per_second' > group_speed2 = km_per_hour2 # Options are > 'mile_per_hour2', 'km_per_hour2', 'knot2', or 'meter_per_second2' > group_temperature = degree_C # Options are 'degree_F' > or 'degree_C' > group_distance = km > group_hailrate = min > > Please note that I'm using some fields (e.g. hailrate, etc.) for other > sensor values (radioactivity, gamma rays, etc.). > Also, the daily, weekly and monthly plots of the InTemp all show Celsius. > > Thanks. > sreda, 21. julij 2021 ob 09:06:56 UTC+2 je oseba gjr80 napisala: > >> This could have any one of a number of causes. A few questions: >> >> - what skin is this, Seasons? Standard? or something else? >> - what driver are you using? Does it provide both inTemp and outTemp? >> - try running WeeWX directly >> <http://weewx.com/docs/usersguide.htm#Running_directly>, you should >> see loop packets (LOOP:) and archive records (REC:) appearing on screen. >> Confirm that inTemp and outTemp are both using the same units. Post a >> copy of some loop packets here if you are unsure what you are looking >> at/for. >> >> Gary >> >> On Wednesday, 21 July 2021 at 16:37:10 UTC+10 mihec wrote: >> >>> Hi, >>> I've noticed this time ago but never reported. My default temperature >>> unit is Celsius. I'm plotting the inside temperature (InTemp) and all >>> (day,week,month) except the yearly plots the units are Celsius. Only in the >>> yearly plot, the units are Fahrenheit. >>> >>> This is an excerpt from the skin.conf: >>> >>> [[[yearhilowinsidetemp]]] >>> [[[[hi]]]] >>> data_type = InTemp >>> aggregate_type = max >>> label = Najvišja >>> [[[[low]]]] >>> data_type = InTemp >>> aggregate_type = min >>> label = Najnižja >>> >>> The yearly plot for the outTemp uses Celsius correctly. >>> I'm using weewx version 3.9.2 >>> >>> Is there any workaround? >>> >>> thanks. >>> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/16de1fb8-9645-48c1-aae8-adb97e905bd9n%40googlegroups.com.
