Hello, Tom, thanks, the 30 min archive interval is set up on purpose. However, after 12 hours, different configs and a full machine reinstall, the system was able to create a report only once, then the index.html with current weather has not been updated, but monthly reports were OK.
Then I reinstalled the app again, configured it from the scratch...nothing. Thanks. Marek Dne úterý 8. února 2022 v 13:51:52 UTC+1 uživatel [email protected] napsal: > Hello, Markek > > The first report is not generated until the end of the first archive > interval. No report is generated on catchup. > > Your archive interval is rather long (1/2 hour), so you will have to wait > a bit to see the first one. > > To change the archive interval, use the utility wee_device with option > --set-interval > <http://www.weewx.com/docs/hardware.htm#vantage_archive_interval>. > > On Tue, Feb 8, 2022 at 3:21 AM Marek Šnapka <[email protected]> > wrote: > >> Hello, I have tried many threads any many things, however I am still >> unsuccessful in getting WeeWX into the working state. >> >> I have installed a HyperV VM (gen2) with Debian 11: >> >> ###################################### >> Icon name: computer-vm >> Chassis: vm >> Virtualization: microsoft >> Operating System: Debian GNU/Linux 11 (bullseye) >> Kernel: Linux 5.10.0-11-amd64 >> Architecture: x86-64 >> ####################################### >> >> >> I successfully installed WeeWX using the docs: >> https://weewx.com/docs/debian.htm >> >> I configured WeeWX to use my Vantage Pro2 station (via WeatherLink IP) >> using the following config: >> >> ####################################### >> # WEEWX CONFIGURATION FILE >> # >> # Copyright (c) 2009-2021 Tom Keffer <[email protected]> >> # See the file LICENSE.txt for your rights. >> >> >> ############################################################################## >> >> # This section is for general configuration information. >> >> # Set to 1 for extra debug info, otherwise comment it out or set to zero >> debug = 1 >> >> # Root directory of the weewx data file hierarchy for this station >> WEEWX_ROOT = / >> >> # Whether to log successful operations >> log_success = True >> >> # Whether to log unsuccessful operations >> log_failure = True >> >> # How long to wait before timing out a socket (FTP, HTTP) connection >> socket_timeout = 20 >> >> # Do not modify this. It is used when installing and updating weewx. >> version = 4.6.0 >> >> >> ############################################################################## >> >> # This section is for information about the station. >> >> [Station] >> >> # Description of the station location >> location = "Opava, Czech Republic" >> >> # Latitude in decimal degrees. Negative for southern hemisphere >> latitude = 49.9296003 >> # Longitude in decimal degrees. Negative for western hemisphere. >> longitude = 17.8794469 >> >> # Altitude of the station, with the unit it is in. This is used only >> # if the hardware cannot supply a value. >> altitude = 270, meter >> >> # Set to type of station hardware. There must be a corresponding >> stanza >> # in this file, which includes a value for the 'driver' option. >> station_type = Vantage >> >> # If you have a website, you may specify an URL. This is required if >> you >> # intend to register your station. >> #station_url = http://www.example.com >> >> # The start of the rain year (1=January; 10=October, etc.). This is >> # downloaded from the station if the hardware supports it. >> rain_year_start = 1 >> >> # Start of week (0=Monday, 6=Sunday) >> week_start = 0 >> >> >> ############################################################################## >> >> [Vantage] >> # This section is for the Davis Vantage series of weather stations. >> >> # Connection type: serial or ethernet >> # serial (the classic VantagePro) >> # ethernet (the WeatherLinkIP or Serial-Ethernet bridge) >> type = ethernet >> >> # If the connection type is serial, a port must be specified: >> # Debian, Ubuntu, Redhat, Fedora, and SuSE: >> # /dev/ttyUSB0 is a common USB port name >> # /dev/ttyS0 is a common serial port name >> # BSD: >> # /dev/cuaU0 is a common serial port name >> # port = /dev/ttyUSB0 >> >> # If the connection type is ethernet, an IP Address/hostname is >> required: >> host = 192.168.9.2 >> >> ###################################################### >> # The rest of this section rarely needs any attention. >> # You can safely leave it "as is." >> ###################################################### >> >> # Serial baud rate (usually 19200) >> baudrate = 19200 >> >> # TCP port (when using the WeatherLinkIP) >> tcp_port = 8080 >> >> # TCP send delay (when using the WeatherLinkIP): >> tcp_send_delay = 0.5 >> >> # The type of LOOP packet to request: 1 = LOOP1; 2 = LOOP2; 3 = both >> loop_request = 1 >> >> # The id of your ISS station (usually 1). If you use a wind meter >> connected >> # to a anemometer transmitter kit, use its id >> iss_id = 1 >> >> # How long to wait for a response from the station before giving up >> (in >> # seconds; must be greater than 2) >> timeout = 5 >> >> # How long to wait before trying again (in seconds) >> wait_before_retry = 15 >> >> # How many times to try before giving up: >> max_tries = 60 >> >> # Vantage model Type: 1 = Vantage Pro; 2 = Vantage Pro2 >> model_type = 2 >> >> # The driver to use: >> driver = weewx.drivers.vantage >> >> >> ############################################################################## >> >> # This section is for uploading data to Internet sites >> >> [StdRESTful] >> >> [[StationRegistry]] >> # To register this weather station with weewx, set this to true, >> # then fill out option 'station_url' above. >> register_this_station = false >> >> [[AWEKAS]] >> # This section is for configuring posts to AWEKAS. >> >> # If you wish to post to AWEKAS, set the option 'enable' to true, >> then specify a username >> # and password. To guard against parsing errors, put the password >> in quotes. >> enable = false >> username = replace_me >> password = replace_me >> >> [[CWOP]] >> # This section is for configuring posts to CWOP. >> >> # If you wish to post to CWOP, set the option 'enable' to true, >> # then specify the station ID (e.g., CW1234). >> enable = false >> station = replace_me >> # If this is an APRS (radio amateur) station, specify the >> # passcode (e.g., 12345). Otherwise, ignore. >> passcode = replace_me >> >> >> [[PWSweather]] >> # This section is for configuring posts to PWSweather.com. >> >> # If you wish to post to PWSweather.com, set the option 'enable' >> to true, then specify a >> # station and password. To guard against parsing errors, put the >> password in quotes. >> enable = false >> station = replace_me >> password = replace_me >> >> [[WOW]] >> # This section is for configuring posts to WOW. >> >> # If you wish to post to WOW, set the option 'enable' to true, >> then specify a station and >> # password. To guard against parsing errors, put the password in >> quotes. >> enable = false >> station = replace_me >> password = replace_me >> >> [[Wunderground]] >> # This section is for configuring posts to the Weather >> Underground. >> >> # If you wish to post to the Weather Underground, set the option >> 'enable' to true, then >> # specify a station (e.g., 'KORHOODR3') and password. To guard >> against parsing errors, put >> # the password in quotes. >> enable = false >> station = replace_me >> password = replace_me >> >> # If you plan on using wunderfixer, set the following >> # to your API key: >> api_key = replace_me >> >> # Set the following to True to have weewx use the WU "Rapidfire" >> # protocol. Not all hardware can support it. See the User's Guide. >> rapidfire = False >> >> >> ############################################################################## >> >> # This section specifies what reports, using which skins, to generate. >> >> [StdReport] >> >> # Where the skins reside, relative to WEEWX_ROOT >> SKIN_ROOT = /etc/weewx/skins >> >> # Where the generated reports should go, relative to WEEWX_ROOT >> HTML_ROOT = /var/www/html/weewx >> >> # The database binding indicates which data should be used in reports. >> data_binding = wx_binding >> >> # Whether to log a successful operation >> log_success = True >> >> # Whether to log an unsuccessful operation >> log_failure = True >> >> # Each of the following subsections defines a report that will be run. >> # See the customizing guide to change the units, plot types and line >> # colors, modify the fonts, display additional sensor data, and other >> # customizations. Many of those changes can be made here by overriding >> # parameters, or by modifying templates within the skin itself. >> >> [[SeasonsReport]] >> # The SeasonsReport uses the 'Seasons' skin, which contains the >> # images, templates and plots for the report. >> skin = Seasons >> enable = true >> >> [[SmartphoneReport]] >> # The SmartphoneReport uses the 'Smartphone' skin, and the images >> and >> # files are placed in a dedicated subdirectory. >> skin = Smartphone >> enable = false >> HTML_ROOT = /var/www/html/weewx/smartphone >> >> [[MobileReport]] >> # The MobileReport uses the 'Mobile' skin, and the images and >> files >> # are placed in a dedicated subdirectory. >> skin = Mobile >> enable = false >> HTML_ROOT = /var/www/html/weewx/mobile >> >> [[StandardReport]] >> # This is the old "Standard" skin. By default, it is not enabled. >> skin = Standard >> enable = false >> >> [[FTP]] >> # FTP'ing the results to a webserver is treated as just another >> report, >> # albeit one with an unusual report generator! >> skin = Ftp >> >> # If you wish to use FTP, set "enable" to "true", then >> # fill out the next four lines. >> # Use quotes around passwords to guard against parsing errors. >> enable = false >> user = replace_me >> password = replace_me >> server = replace_me # The ftp server name, e.g, >> www.myserver.org >> path = replace_me # The destination directory, e.g., /weather >> >> # Set to True for an FTP over TLS (FTPS) connection. Not all >> servers >> # support this. >> secure_ftp = False >> >> # To upload files from something other than what HTML_ROOT is set >> # to above, specify a different HTML_ROOT here. >> #HTML_ROOT = /var/www/html/weewx >> >> # Most FTP servers use port 21 >> port = 21 >> >> # Set to 1 to use passive mode, zero for active mode >> passive = 1 >> >> [[RSYNC]] >> # rsync'ing to a webserver is treated as just another report >> skin = Rsync >> >> # If you wish to use rsync, you must configure passwordless ssh >> using >> # public/private key authentication from the user account that >> weewx >> # runs to the user account on the remote machine where the files >> # will be copied. >> # >> # If you wish to use rsync, set "enable" to "true", then >> # fill out server, user, and path. >> # The server should appear in your .ssh/config file. >> # The user is the username used in the identity file. >> # The path is the destination directory, such as >> /var/www/html/weather. >> # Be sure that the user has write permissions on the destination! >> enable = false >> server = replace_me >> user = replace_me >> path = replace_me >> >> # To upload files from something other than what HTML_ROOT is set >> # to above, specify a different HTML_ROOT here. >> #HTML_ROOT = /var/www/html/weewx >> >> # Rsync can be configured to remove files from the remote server >> if >> # they don't exist under HTML_ROOT locally. USE WITH CAUTION: if >> you >> # make a mistake in the remote path, you could could >> unintentionally >> # cause unrelated files to be deleted. Set to 1 to enable remote >> file >> # deletion, zero to allow files to accumulate remotely. >> delete = 0 >> >> # Options in the [[Defaults]] section below will apply to all reports. >> # What follows are a few of the more popular options you may want to >> # uncomment, then change. >> [[Defaults]] >> >> # Which language to use for all reports. Not all skins support >> all languages. >> # You can override this for individual reports. >> lang = en >> >> # Which unit system to use for all reports. Choices are 'us', >> 'metric', or 'metricwx'. >> # You can override this for individual reports. >> unit_system = metricwx >> >> [[[Units]]] >> >> # Option "unit_system" above sets the general unit system, >> but overriding specific unit >> # groups is possible. These are popular choices. Uncomment >> and set as appropriate. >> # NB: The unit is always in the singular. I.e., >> 'mile_per_hour', >> # NOT 'miles_per_hour' >> [[[[Groups]]]] >> # group_altitude = meter # Options are >> 'foot' or 'meter' >> # group_pressure = mbar # Options are >> 'inHg', 'mmHg', 'mbar', or 'hPa' >> # group_rain = mm # Options are >> 'inch', 'cm', or 'mm' >> # group_rainrate = mm_per_hour # Options are >> 'inch_per_hour', 'cm_per_hour', or 'mm_per_hour' >> # The following line is used to keep the above lines >> indented properly. >> # It can be ignored. >> unused = unused >> >> # Uncommenting the following section frequently results in >> more >> # attractive formatting of times and dates, but may not work >> in >> # your locale. >> [[[[TimeFormats]]]] >> # day = %H:%M >> # week = %H:%M on %A >> # month = %d-%b-%Y %H:%M >> # year = %d-%b-%Y %H:%M >> # rainyear = %d-%b-%Y %H:%M >> # current = %d-%b-%Y %H:%M >> # ephem_day = %H:%M >> # ephem_year = %d-%b-%Y %H:%M >> # The following line is used to keep the above lines >> indented properly. >> # It can be ignored. >> unused = unused >> >> [[[Labels]]] >> # Users frequently change the labels for these observation >> types >> [[[[Generic]]]] >> # inHumidity = Inside Humidity >> # inTemp = Inside Temperature >> # outHumidity = Outside Humidity >> # outTemp = Outside Temperature >> # extraTemp1 = Temperature1 >> # extraTemp2 = Temperature2 >> # extraTemp3 = Temperature3 >> # The following line is used to keep the above lines >> indented properly. >> # It can be ignored. >> unused = unused >> >> >> ############################################################################## >> >> # This service acts as a filter, converting the unit system coming from >> # the hardware to a unit system in the database. >> >> [StdConvert] >> >> # The target_unit affects only the unit system in the database. Once >> # chosen it cannot be changed without converting the entire database. >> # Modification of target_unit after starting weewx will result in >> # corrupt data - the database will contain a mix of US and METRIC >> data. >> # >> # The value of target_unit does not affect the unit system for >> # reporting - reports can display US, Metric, or any combination of >> units. >> # >> # In most cases, target_unit should be left as the default: US >> # >> # In particular, those migrating from a standard wview installation >> # should use US since that is what the wview database contains. >> >> # DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING! >> target_unit = US # Options are 'US', 'METRICWX', or 'METRIC' >> >> >> ############################################################################## >> >> # This section can adjust data using calibration expressions. >> >> [StdCalibrate] >> >> [[Corrections]] >> # For each type, an arbitrary calibration expression can be given. >> # It should be in the units defined in the StdConvert section. >> # Example: >> foo = foo + 0.2 >> >> >> ############################################################################## >> >> # This section is for quality control checks. If units are not >> specified, >> # values must be in the units defined in the StdConvert section. >> >> [StdQC] >> >> [[MinMax]] >> barometer = 26, 32.5, inHg >> pressure = 24, 34.5, inHg >> outTemp = -40, 120, degree_F >> inTemp = 10, 120, degree_F >> outHumidity = 0, 100 >> inHumidity = 0, 100 >> windSpeed = 0, 120, mile_per_hour >> rain = 0, 10, inch >> >> >> ############################################################################## >> >> # This section controls the origin of derived values. >> >> [StdWXCalculate] >> >> [[Calculations]] >> # How to calculate derived quantities. Possible values are: >> # hardware - use the value provided by hardware >> # software - use the value calculated by weewx >> # prefer_hardware - use value provide by hardware if available, >> # otherwise use value calculated by weewx >> >> pressure = prefer_hardware >> altimeter = prefer_hardware >> appTemp = prefer_hardware >> barometer = prefer_hardware >> cloudbase = prefer_hardware >> dewpoint = prefer_hardware >> ET = prefer_hardware >> heatindex = prefer_hardware >> humidex = prefer_hardware >> inDewpoint = prefer_hardware >> maxSolarRad = prefer_hardware >> rainRate = prefer_hardware >> windchill = prefer_hardware >> windrun = prefer_hardware >> >> >> ############################################################################## >> >> # For hardware that supports it, this section controls how often the >> # onboard clock gets updated. >> >> [StdTimeSynch] >> >> # How often to check the weather station clock for drift (in seconds) >> clock_check = 14400 >> >> # How much it can drift before we will correct it (in seconds) >> max_drift = 5 >> >> >> ############################################################################## >> >> # This section is for configuring the archive service. >> >> [StdArchive] >> >> # If the station hardware supports data logging then the archive >> interval >> # will be downloaded from the station. Otherwise, specify it (in >> seconds). >> archive_interval = 1800 >> >> # If possible, new archive records are downloaded from the station >> # hardware. If the hardware does not support this, then new archive >> # records will be generated in software. >> # Set the following to "software" to force software record generation. >> record_generation = hardware >> >> # Whether to include LOOP data in hi/low statistics >> loop_hilo = True >> >> # The data binding used to save archive records >> data_binding = wx_binding >> >> # Whether to log successful archive operations >> log_success = True >> >> # Whether to log unsuccessful archive operations >> log_failure = True >> >> >> ############################################################################## >> >> # This section binds a data store to a database. >> >> [DataBindings] >> >> [[wx_binding]] >> # The database must match one of the sections in [Databases]. >> # This is likely to be the only option you would want to change. >> database = archive_sqlite >> # The name of the table within the database >> table_name = archive >> # The manager handles aggregation of data for historical summaries >> manager = weewx.manager.DaySummaryManager >> # The schema defines the structure of the database. >> # It is *only* used when the database is created. >> schema = schemas.wview_extended.schema >> >> >> ############################################################################## >> >> # This section defines various databases. >> >> [Databases] >> >> # A SQLite database is simply a single file >> [[archive_sqlite]] >> database_name = weewx.sdb >> database_type = SQLite >> >> # MySQL >> [[archive_mysql]] >> database_name = weewx >> database_type = MySQL >> >> >> ############################################################################## >> >> # This section defines defaults for the different types of databases. >> >> [DatabaseTypes] >> >> # Defaults for SQLite databases >> [[SQLite]] >> driver = weedb.sqlite >> # Directory in which the database files are located >> SQLITE_ROOT = /var/lib/weewx >> >> # Defaults for MySQL databases >> [[MySQL]] >> driver = weedb.mysql >> # The host where the database is located >> host = localhost >> # The user name for logging in to the host >> user = weewx >> # The password (use quotes to guard against parsing errors) >> password = weewx >> >> >> ############################################################################## >> >> # This section configures the internal weewx engine. >> >> [Engine] >> >> # The following section specifies which services should be run and in >> what order. >> [[Services]] >> prep_services = weewx.engine.StdTimeSynch >> data_services = , >> process_services = weewx.engine.StdConvert, >> weewx.engine.StdCalibrate, weewx.engine.StdQC, >> weewx.wxservices.StdWXCalculate >> xtype_services = weewx.wxxtypes.StdWXXTypes, >> weewx.wxxtypes.StdPressureCooker, weewx.wxxtypes.StdRainRater, >> weewx.wxxtypes.StdDelta >> archive_services = weewx.engine.StdArchive >> restful_services = weewx.restx.StdStationRegistry, >> weewx.restx.StdWunderground, weewx.restx.StdPWSweather, >> weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS >> report_services = weewx.engine.StdPrint, weewx.engine.StdReport >> >> ####################################### >> >> However, I am getting pretty odd results as I cannot see any HTML folder >> created in /var/www/html/ . >> >> As the reporting was the only function I actually needed, this seems >> rather unfortunate. >> >> However, what I have found out is that I cannot see any cheetahgenerator >> logs at all in the syslog: >> >> ####################################### >> >> root@server9-weewx:~# tail -n 200 /var/log/syslog |grep 1617 >> Feb 8 12:02:56 server9-weewx weewx[1617] DEBUG __main__: Initializing >> engine >> Feb 8 12:02:56 server9-weewx weewx[1617] INFO weewx.engine: Loading >> station type Vantage (weewx.drivers.vantage) >> Feb 8 12:02:56 server9-weewx weewx[1617] DEBUG weewx.drivers.vantage: >> Driver version is 3.2.3 >> Feb 8 12:02:56 server9-weewx weewx[1617] DEBUG weewx.drivers.vantage: >> Option loop_request=1 >> Feb 8 12:02:56 server9-weewx weewx[1617] DEBUG weewx.drivers.vantage: >> Opened up ethernet host 192.168.9.2 on port 8080. timeout=5.0, >> tcp_send_delay=0.5 >> Feb 8 12:02:56 server9-weewx systemd[1]: weewx.service: Supervising >> process 1617 which is not our child. We'll most likely not notice when it >> exits. >> Feb 8 12:02:56 server9-weewx weewx[1617] DEBUG weewx.drivers.vantage: >> Gentle wake up of console successful >> Feb 8 12:02:57 server9-weewx weewx[1617] DEBUG weewx.drivers.vantage: >> Hardware type is 16 >> Feb 8 12:03:01 server9-weewx weewx[1617] DEBUG weewx.drivers.vantage: >> ISS ID is 1 >> Feb 8 12:03:01 server9-weewx weewx[1617] DEBUG weewx.drivers.vantage: >> Hardware name: Vantage Pro2 >> Feb 8 12:03:01 server9-weewx weewx[1617] DEBUG weewx.engine: Loading >> service weewx.engine.StdTimeSynch >> Feb 8 12:03:01 server9-weewx weewx[1617] DEBUG weewx.engine: Finished >> loading service weewx.engine.StdTimeSynch >> Feb 8 12:03:01 server9-weewx weewx[1617] DEBUG weewx.engine: Loading >> service weewx.engine.StdConvert >> Feb 8 12:03:01 server9-weewx weewx[1617] INFO weewx.engine: StdConvert >> target unit is 0x1 >> Feb 8 12:03:01 server9-weewx weewx[1617] DEBUG weewx.engine: Finished >> loading service weewx.engine.StdConvert >> Feb 8 12:03:01 server9-weewx weewx[1617] DEBUG weewx.engine: Loading >> service weewx.engine.StdCalibrate >> Feb 8 12:03:01 server9-weewx weewx[1617] DEBUG weewx.engine: Finished >> loading service weewx.engine.StdCalibrate >> Feb 8 12:03:01 server9-weewx weewx[1617] DEBUG weewx.engine: Loading >> service weewx.engine.StdQC >> Feb 8 12:03:01 server9-weewx weewx[1617] DEBUG weewx.engine: Finished >> loading service weewx.engine.StdQC >> Feb 8 12:03:01 server9-weewx weewx[1617] DEBUG weewx.engine: Loading >> service weewx.wxservices.StdWXCalculate >> Feb 8 12:03:01 server9-weewx weewx[1617] INFO weewx.wxservices: >> StdWXCalculate will use data binding wx_binding >> Feb 8 12:03:01 server9-weewx weewx[1617] DEBUG weewx.manager: Daily >> summary version is 4.0 >> Feb 8 12:03:01 server9-weewx weewx[1617] DEBUG weewx.engine: Finished >> loading service weewx.wxservices.StdWXCalculate >> Feb 8 12:03:01 server9-weewx weewx[1617] DEBUG weewx.engine: Loading >> service weewx.wxxtypes.StdWXXTypes >> Feb 8 12:03:01 server9-weewx weewx[1617] DEBUG weewx.engine: Finished >> loading service weewx.wxxtypes.StdWXXTypes >> Feb 8 12:03:01 server9-weewx weewx[1617] DEBUG weewx.engine: Loading >> service weewx.wxxtypes.StdPressureCooker >> Feb 8 12:03:01 server9-weewx weewx[1617] DEBUG weewx.engine: Finished >> loading service weewx.wxxtypes.StdPressureCooker >> Feb 8 12:03:01 server9-weewx weewx[1617] DEBUG weewx.engine: Loading >> service weewx.wxxtypes.StdRainRater >> Feb 8 12:03:01 server9-weewx weewx[1617] DEBUG weewx.engine: Finished >> loading service weewx.wxxtypes.StdRainRater >> Feb 8 12:03:01 server9-weewx weewx[1617] DEBUG weewx.engine: Loading >> service weewx.wxxtypes.StdDelta >> Feb 8 12:03:01 server9-weewx weewx[1617] DEBUG weewx.engine: Finished >> loading service weewx.wxxtypes.StdDelta >> Feb 8 12:03:01 server9-weewx weewx[1617] DEBUG weewx.engine: Loading >> service weewx.engine.StdArchive >> Feb 8 12:03:01 server9-weewx weewx[1617] INFO weewx.engine: Archive will >> use data binding wx_binding >> Feb 8 12:03:01 server9-weewx weewx[1617] INFO weewx.engine: Record >> generation will be attempted in 'hardware' >> Feb 8 12:03:01 server9-weewx weewx[1617] INFO weewx.engine: Using >> archive interval of 1800 seconds (specified by hardware) >> Feb 8 12:03:01 server9-weewx weewx[1617] DEBUG weewx.engine: Use LOOP >> data in hi/low calculations: 1 >> Feb 8 12:03:01 server9-weewx weewx[1617] DEBUG weewx.engine: Finished >> loading service weewx.engine.StdArchive >> Feb 8 12:03:01 server9-weewx weewx[1617] DEBUG weewx.engine: Loading >> service weewx.restx.StdStationRegistry >> Feb 8 12:03:01 server9-weewx weewx[1617] INFO weewx.restx: >> StationRegistry: Registration not requested. >> Feb 8 12:03:01 server9-weewx weewx[1617] DEBUG weewx.engine: Finished >> loading service weewx.restx.StdStationRegistry >> Feb 8 12:03:01 server9-weewx weewx[1617] DEBUG weewx.engine: Loading >> service weewx.restx.StdWunderground >> Feb 8 12:03:01 server9-weewx weewx[1617] INFO weewx.restx: Wunderground: >> Posting not enabled. >> Feb 8 12:03:01 server9-weewx weewx[1617] DEBUG weewx.engine: Finished >> loading service weewx.restx.StdWunderground >> Feb 8 12:03:01 server9-weewx weewx[1617] DEBUG weewx.engine: Loading >> service weewx.restx.StdPWSweather >> Feb 8 12:03:01 server9-weewx weewx[1617] INFO weewx.restx: PWSweather: >> Posting not enabled. >> Feb 8 12:03:01 server9-weewx weewx[1617] DEBUG weewx.engine: Finished >> loading service weewx.restx.StdPWSweather >> Feb 8 12:03:01 server9-weewx weewx[1617] DEBUG weewx.engine: Loading >> service weewx.restx.StdCWOP >> Feb 8 12:03:01 server9-weewx weewx[1617] INFO weewx.restx: CWOP: Posting >> not enabled. >> Feb 8 12:03:01 server9-weewx weewx[1617] DEBUG weewx.engine: Finished >> loading service weewx.restx.StdCWOP >> Feb 8 12:03:01 server9-weewx weewx[1617] DEBUG weewx.engine: Loading >> service weewx.restx.StdWOW >> Feb 8 12:03:01 server9-weewx weewx[1617] INFO weewx.restx: WOW: Posting >> not enabled. >> Feb 8 12:03:01 server9-weewx weewx[1617] DEBUG weewx.engine: Finished >> loading service weewx.restx.StdWOW >> Feb 8 12:03:01 server9-weewx weewx[1617] DEBUG weewx.engine: Loading >> service weewx.restx.StdAWEKAS >> Feb 8 12:03:01 server9-weewx weewx[1617] INFO weewx.restx: AWEKAS: >> Posting not enabled. >> Feb 8 12:03:01 server9-weewx weewx[1617] DEBUG weewx.engine: Finished >> loading service weewx.restx.StdAWEKAS >> Feb 8 12:03:01 server9-weewx weewx[1617] DEBUG weewx.engine: Loading >> service weewx.engine.StdPrint >> Feb 8 12:03:01 server9-weewx weewx[1617] DEBUG weewx.engine: Finished >> loading service weewx.engine.StdPrint >> Feb 8 12:03:01 server9-weewx weewx[1617] DEBUG weewx.engine: Loading >> service weewx.engine.StdReport >> Feb 8 12:03:01 server9-weewx weewx[1617] INFO weewx.engine: 'pyephem' >> not detected, extended almanac data is not available >> Feb 8 12:03:01 server9-weewx weewx[1617] DEBUG weewx.engine: Finished >> loading service weewx.engine.StdReport >> Feb 8 12:03:01 server9-weewx weewx[1617] INFO __main__: Starting up >> weewx version 4.6.0 >> Feb 8 12:03:01 server9-weewx weewx[1617] DEBUG weewx.drivers.vantage: >> Gentle wake up of console successful >> Feb 8 12:03:02 server9-weewx weewx[1617] INFO weewx.engine: Clock error >> is 2.52 seconds (positive is fast) >> Feb 8 12:03:02 server9-weewx weewx[1617] INFO weewx.engine: Using >> binding 'wx_binding' to database 'weewx.sdb' >> Feb 8 12:03:02 server9-weewx weewx[1617] INFO weewx.manager: Starting >> backfill of daily summaries >> Feb 8 12:03:02 server9-weewx weewx[1617] INFO weewx.manager: Daily >> summaries up to date >> Feb 8 12:03:02 server9-weewx weewx[1617] DEBUG weewx.drivers.vantage: >> Getting archive packets since 2022-02-08 11:30:00 CET (1644316200) >> Feb 8 12:03:02 server9-weewx weewx[1617] DEBUG weewx.drivers.vantage: >> Gentle wake up of console successful >> Feb 8 12:03:04 server9-weewx weewx[1617] DEBUG weewx.drivers.vantage: >> Retrieving 1 page(s); starting index= 4 >> Feb 8 12:03:05 server9-weewx weewx[1617] INFO weewx.manager: Added >> record 2022-02-08 12:00:00 CET (1644318000) to database 'weewx.sdb' >> Feb 8 12:03:05 server9-weewx weewx[1617] INFO weewx.manager: Added >> record 2022-02-08 12:00:00 CET (1644318000) to daily summary in 'weewx.sdb' >> Feb 8 12:03:05 server9-weewx weewx[1617] INFO weewx.engine: Starting >> main packet loop. >> Feb 8 12:03:05 server9-weewx weewx[1617] DEBUG weewx.drivers.vantage: >> Gentle wake up of console successful >> Feb 8 12:03:06 server9-weewx weewx[1617] DEBUG weewx.drivers.vantage: >> Requesting 200 LOOP packets. >> Feb 8 12:03:06 server9-weewx weewx[1617] DEBUG weewx.drivers.vantage: >> Gentle wake up of console successful >> root@server9-weewx:~# >> >> ####################################### >> >> I have also used this thread to eliminate the read erros and migrated >> from init.d to systemd (by Peter Fletcher at 14. 3. 2019 21:51:37): >> https://groups.google.com/g/weewx-user/c/xhZYyX5cg8k >> >> This did indeed solve many IP read problems (and I highly recommend to >> use this instead of init.d in packages). >> >> However, the HTMLs are still not generated despite the DB catchup runs >> correctly. >> >> I kindly ask for help. >> >> Thank You. >> >> Marek Šnapka >> >> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/2ad62eeb-94fc-4967-a454-49ac5fe2abaan%40googlegroups.com >> >> <https://groups.google.com/d/msgid/weewx-user/2ad62eeb-94fc-4967-a454-49ac5fe2abaan%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/c8e28193-fa7c-4569-bc7d-03bfb72c273an%40googlegroups.com.
