I meant to say, WeatherLinkLiveUDP is set to 10s interval, it makes no difference at 30s, so I assume the UDP packets from WLL only send the pressure every 30 seconds or so.
On Saturday, February 26, 2022 at 12:42:05 PM UTC Rory Gillies wrote: > Hi, > > I am using the WeatherLinkLiveUDP driver with Weewx to access my David > Vantage Pro2 Plus station. Everything works a treat (you can see my weather > page here using the excellent Neowx-Material skin: > https://www.360shetland.co.uk/weather/index.html > > I upload to PWS Weather, Windy, and Weather Underground using the > rapidfire mode. I had an issue with wind speed being higher than wind gust > speed which I have fixed, however the pressure value only seems to be > updated every 30 seconds rather than with each loop. My WU Rapid station is > here: https://www.wunderground.com/dashboard/pws/ISHETL39/ > > Is there any way to append the pressure value to the loop data that is > uploaded? Although the pressure is recorded and can be seen in the station > current condition, the pressure dial disappears for 30 seconds then appears > briefly until the next loop packet is uploaded. It's not the end of the > world, but I would like the pressure dial to be there all the time. > > Thanks, > > Rory > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/7f57072d-45b5-46ab-b34e-26f1da416980n%40googlegroups.com.
