Sorry to crash the thread but, Why does 8.0 read HTTP/1.0 WhatsUp_Gold/7.0 in the IIS logs??
Tv -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Mark Symons Sent: Wednesday, March 26, 2003 12:17 PM To: [EMAIL PROTECTED] Subject: RE: [WhatsUp Forum] HTML Content Scan I see that you are using WhatsUp Gold v8.0 and that means that you already have a fix to what we called the "chunking" problem. ie: Expect=<html>.*</html> If <html> is found in the 1st chunk of data received and </html> is not found in the 1st chunk but in a subsequent chunk then the check should pass OK - but was not until v8.0. So.. a couple of questions to help clarify things: 1) How big are the pages being monitored? 2) Are the pages dynamic? 3) Is the string being looked for an exact string or based on an expression? Mark Symons Ipswitch, Inc Augusta GA -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Benton, Bob Sent: Wednesday, March 26, 2003 10:52 To: [EMAIL PROTECTED] Subject: [WhatsUp Forum] HTML Content Scan We're monitoring about half a dozen web sites at our provider over the internet with content scan. We get about a dozen or so single poll misses every day. We're monitoring for a string near the end of the pages to make sure we can at least load them that far. The misses appear at random, and don't seem to be connectivity-related. Granted there's an implied problem with doing this over the Internet, but pings always work and the pages never seem to have a problem from a user point of view. We've increased the timeouts to 30 seconds, but that doesn't appear to help much, if at all. I'm not convinced this is normal. Circuit bandwidth at either location and sustained device latency in the path are for sure not the issue...at least that we can tell with sniffers and other apps. WhatsUP is 8.0, but it was the same at 7.2. Map polling is once per minute. There are only 25 or so devices on this particular map. Server is a dual 2G CPU, 2B memory, running Gig Ethernet and both ends have a 10Mb pipe to the Internet. No other problems with whatsup...runs very clean managing about 350 devices and interfaces including 27 regional offices over frame-relay. Using ping instead of content scan results in no failures. Before I go and change log triggers to 2 or more, does anyone else have any ideas? Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/ Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
