Hi,
I have setup WUG to monitor two of my server's C: drives to tell me if
they are more than 80% full. I read the documents and found the OIDs to
use and one server work fine and the other server doesn't work properly.
I created a monitored SNMP service with OID
1.3.6.1.4.1.311.1.1.3.1.1.5.1.3.2.67.58 I gave it a range of values from
20 (low) to 100 (high). Then I assigned this service to two servers. One
server has 26% free space and the other has 67% free space (from Net
Tools below)
ldiskPercentFreeSpace.2.67.58=26
ldiskPercentFreeSpace.2.67.58=67
The 26% server show service down in the map and the 67% server show
service up on the map.
Why? Did I do something wrong? Don't think so. It is the same service
being monitored.
The thing that I noticed as a difference is that the 67% comes back
almost instantly while the 26% takes a good 5 seconds. Now the 67% is
the WUG server that this is being run on while the 26% is another server
on the local subnet. I have implemented SNMP4W2K-STD on both of these
servers. The 26% is a Win2K Adv Server SP3 and the 67% is a Win2K Server
SP4
Does anyone have any thoughts on what might be the issue here?
Thanx
Goran Jovanovic
The LAN Shoppe
2345 Yonge Street, Suite 302
Toronto, Ontario M4P 2E5
Phone: (416) 440-1167 x-2113
Cell: (416) 931-0688
E-Mail: [EMAIL PROTECTED]
Please visit http://www.ipswitch.com/support/mailing-lists.html
to be removed from this list.
An Archive of this list is available at:
http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
