Thanks for the reply. I guess I did not realize that you are using the USB version. But the answer to my question is that you are using the EMU for the IQ input **and** the audio output.
I would like to use my EMU (PCI card) for the IQ input and use the AC97 motherboard sound card for audio output (Like Linrad). This seems to be not possible with Winrad, unless I am missing something. It wants to FORCE the output to be the same sample rate as the input as the output. This true even when I run ASIO4ALL. In any case, I get no indication of any signal when running ASIO4ALL Ken ----- Original Message ----- From: "Christoph Petermann" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Cc: "winrad discussion list" <[email protected]> Sent: Wednesday, January 09, 2008 21:32 Subject: Re: winrad (and E-MU) > Hi Ken > > Happy New Year to you !! > > So what do I use (RX wise) here: > > * Softrock 6.1 RXTX IQ out > * E-MU 0202 USB 2.0 Box > + Software: I downloaded the NEWEST drivers from E-MU - the one delivered > with > the card did not work with WINRAD. > + Software: ASIO4ALL may be helpful; I don't need to use it. > * Winrad 1.3 / Rocky / Power SDR > * SONY Notebook with 2.6GHz Pentium IV and WinXP > > I only did > [MODE] -> IQ > [Select Sound Card] -> E-MU 0202 > [Select Sample Rate] -> 192 kHz > [START] > CPU load ca 50% > > YOU MUST HAVE USB 2.0 > > > Here it works fine ! > > I once tried transmitting with PowerSDR, where I used the Notebook > internal > sound card for the Microphone and Speaker and the EMU interfaces to the > SDR > RX and TX wise. > > I am just building another Softrock for 30m with a transverter to 50 MHz. > > > 73 de Christoph DF9CY > > (I put a copy to the Winrad group, it may be interesting for others too) > > > Am Mittwoch, 9. Januar 2008 19:30 schrieben Sie: >> Hi christophe >> >> what do you use for the audio out in your system? >> >> in Linrad I can select the EMU card for (192000 s/sec) input and my other >> card for (11025 s/sec)output. >> >> I don't see how to do this with Winrad. It seems to want to use the EMU >> card for ouput too, and at the same high sample rate. >> >> ? >> >> Ken > > -- > Christoph Petermann > www.df9cy.de | www.cpetermann.de > Amateur Radio DF9CY | Astrophotography | Folkmusic > _______________________________________________ Winrad mailing list [email protected] http://winrad.org/mailman/listinfo/winrad_winrad.org
