Yes, I am I operate in the VHF/UHF contests as a rover and my IF radio is a Kenwood TS-690S. The biggest problem I had was where/how to access the 8.83 MHz IF. I finally came up with a simple solution: I connected a small piece of coax to the 2.4 KHz Filter. The downside of this approach is that I have to select that filter in order to use my Softrock SDR and Winrad. I also inserted a small preamplifier (KK7B design from Kanga US) before my Softrock V6.2 because I needed some more gain. I put a couple of pictures on the Softrock Radio website in the files section under KJ1K.
Good luck, BTW, I have not actually used Winrad in a contest although I have many hours of use checking it out. Hope to try it out this weekend in the January VHF contest. 73... Sigurd, KJ1K ----- Original Message ----- From: "Danie Brynard" <[EMAIL PROTECTED]> To: "'winrad discussion list'" <[email protected]> Sent: Thursday, January 17, 2008 1:31 PM Subject: [Winrad] TS690S > Hi > > Are there anybody who is using Windrad with his TS690S HF radio ? > > I would like to connect it to the 8.83MHz IF ..I need some advise > please... > > Danie > Zs6awk > > > > > _______________________________________________ > Winrad mailing list > [email protected] > http://winrad.org/mailman/listinfo/winrad_winrad.org > _______________________________________________ Winrad mailing list [email protected] http://winrad.org/mailman/listinfo/winrad_winrad.org
