We were actually running modular 12.2(18)SXF7 before I believe. We upgraded to the latest release under the advisement of TAC to actually try to correct this problem.
The non-modular code is a good thought actually, maybe we will give that shot. -----Original Message----- From: Jonathan Yantis [mailto:[EMAIL PROTECTED] Sent: Tuesday, October 16, 2007 8:49 AM To: [email protected] Subject: Re: [WIRELESS-LAN] WiSM & 6500 memory leaks Joe, I would recommend running non-modular 12.2(18)SXF9 or perhaps SXF11. SXH is brand new, as is the modular code, and there are bound to be problems. WiSMs have been well tested with SXF code, so unless you have a reason to run 12.2(33)SXH, try downgrading and your problem will likely go away. -- Jonathan Yantis Network Engineer MUSC OCIO-IS NST On Mon, Oct 15, 2007 at 03:55:52PM -0400, Roth, Joe wrote: > We have two Catalyst 6500's running native IOS. Both have 3 WiSM blades > installed in each. We are currently running modular IOS ver 12.2(33)SXH. > > > > Both Sup720's seem to be leaking memory at a constant rate, about 7 > megabytes a day. The Sup's eventually hit a point where telnet to it > becomes sluggish and the memory spikes frequently, then they reboot > themselves. > > > > I am working with TAC, they seem the think that it is the udp.proc > process. I hate to point my finger at the WiSM blades, but I can't think > of anything else that has changed within the last 6 months. > > > > Has anyone else noticed similar issues? > > > > --Joe > > > > =================================== > > Joe Roth > > Information Technology Services > > Binghamton University > > Ph: 607-777-7528 > > Fx: 607-777-4009 > > > > > ********** > Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/.
