In existing buildings we perform a site survey. Forward a work order to the infrastructure group to pull cable and install the access point. In new buildings we use the cad drawings to determine locations.
-----Original Message----- From: The EDUCAUSE Wireless Issues Constituent Group Listserv [mailto:[email protected]] On Behalf Of Case, Brandon J Sent: Wednesday, December 17, 2008 9:01 AM To: [email protected] Subject: [WIRELESS-LAN] Wireless Installation Process I'm curious as to how you all out there handle the actual physical installation of APs in your environments. Do you handle that within the same team that manages the wireless network or is it a separate group that installs the equipment? How do you go about having the data jacks installed? Just as an estimation, approximately how long does it take to have an AP installed? For buildings that are still in the planning phase, do you design the AP locations into the building based on CAD drawings ahead of time? Or do you perform an on-site survey after the building is open and then proceed with installation? Any and all comments are appreciated. Thanks, -- Brandon Case, CCNA Network Engineer, ITaP Purdue University [email protected] Office: (765)49-67096 Mobile: (765)479-7597 Fax: (765)49-46620 ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/.
