We migrated to 16 WISM2s from 18 original WISMs a few months ago, so far no issues, and the increased performance has been noticeable. Our WISMs were running at a pretty high cpu load, the WISM2s tick along at a nice low load. Our last firmware update was also a smooth process, we had problems pre-loading firmware to APs with the original WISMs but pre-loading with the WISM2s was not a problem.
-Chris On Apr 30, 2012, at 8:12 PM, Legge, Jeffry wrote: Has anyone installed Cisco WISM2 blades? Any problems or caveats? -Jeff Legge Radford University ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found athttp://www.educause.edu/groups/. =========================================== Chris Murphy Network Engineer MIT Information Services & Technology Room W92-191 77 Massachusetts Avenue Cambridge, MA 02139 [email protected]<mailto:[email protected]> ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/.
