We too have been running the WiSM2's without any problems. The 1000-AP
support and 10G backplane connections are handy.
The only 'issue' we have faced is large multicast load thanks to
ridiculous amounts of mDNS traffic, but that's not the controller's fault.
Joe
On 05/01/2012 12:41 AM, Chris Murphy wrote:
We migrated to 16 WISM2s from 18 original WISMs a few months ago, so
far no issues, and the increased performance has been noticeable. Our
WISMs were running at a pretty high cpu load, the WISM2s tick along at
a nice low load. Our last firmware update was also a smooth process,
we had problems pre-loading firmware to APs with the original WISMs
but pre-loading with the WISM2s was not a problem.
-Chris
On Apr 30, 2012, at 8:12 PM, Legge, Jeffry wrote:
Has anyone installed Cisco WISM2 blades? Any problems or caveats?
-Jeff Legge
Radford University
********** Participation and subscription information for this
EDUCAUSE Constituent Group discussion list can be found
athttp://www.educause.edu/groups/.
===========================================
Chris Murphy
Network Engineer
MIT Information Services & Technology
Room W92-191
77 Massachusetts Avenue
Cambridge, MA 02139
[email protected] <mailto:[email protected]>
********** Participation and subscription information for this
EDUCAUSE Constituent Group discussion list can be found at
http://www.educause.edu/groups/.
**********
Participation and subscription information for this EDUCAUSE Constituent Group
discussion list can be found at http://www.educause.edu/groups/.
