In my poking around, if a device says "B,G,N" it's always been 2.4GHz only, "A,B,G,N" or anything saying "AC" is safely dual-band. Of course, if it doesn't even say THAT much I'm not sure I'd want to buy it… :)
-Chris ================================================== Chris Murphy Business Analyst MIT Information Services & Technology Room W92-191 77 Massachusetts Avenue Cambridge, MA 02139 [email protected] 617-253-4105 From: The EDUCAUSE Wireless Issues Constituent Group Listserv <[email protected]<mailto:[email protected]>> on behalf of "Danner, Mearl" <[email protected]<mailto:[email protected]>> Reply-To: The EDUCAUSE Wireless Issues Constituent Group Listserv <[email protected]<mailto:[email protected]>> Date: Thursday, April 7, 2016 at 11:26 AM To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Subject: Re: [WIRELESS-LAN] Turning off 2.4 on a select SSID? That's a good point Phillipe. Had to recently shop for a laptop for a relative to use at school. Had to open up Device Manager to find the wireless card description. It appears that at about the $400 price point is the split between single band and dual band wireless cards. Mearl Sent from my Android phone using Symantec TouchDown (www.symantec.com) -----Original Message----- From: Philippe Hanset [[email protected]<mailto:[email protected]>] Received: Thursday, 07 Apr 2016, 9:37AM To: [email protected]<mailto:[email protected]> [[email protected]<mailto:[email protected]>] Subject: Re: [WIRELESS-LAN] Turning off 2.4 on a select SSID? My ears have been burning… I understand Hector's comment about the spirit of eduroam, but like Ryan I have also be tempted in the past to only support 5 GHz in certain areas because 2.4 GHz was becoming too much of a pain (e.g. Dormitories). The eduroam Compliance Statement requires 802.11, no frequency mentioned. eduroam users with 2.4GHz devices will just not see the available SSID if a school decides to only offer it at 5 GHz in certain locations. In a sense it is no different than schools only offering eduroam in certain locations. Now, if the entire eduroam SSID for all locations at the school is on 5 GHz, it might be challenging. But how many clients REALLY can’t support 5 GHz? The stats showing 2.4 GHz VS 5 GHz usage can be deceiving. Is it a client with both radios and a poor selection of spectrum, or is it really 2.4 Ghz only capable devices? It seems that the best way to know if 5 GHz only is fine for your community is to “just do it”. I checked cheap laptops at BestBuy and under specifications you find “Wireless-AC” or “Wireless-B, G, N". No reference to the type of radio. Those darn marketing people, they will get you every time. Philippe Philippe Hanset www.anyroam.net<http://www.anyroam.net> www.eduroam.us +1 (865) 236-0770 GPG key id: 0xF2636F9C On Apr 7, 2016, at 10:04 AM, Turner, Ryan H <[email protected]<mailto:[email protected]>> wrote: I don't think so. I think anytime a university enforces a uniform policy that applies to all folks, it shouldn't be an issue. Of course, we are a long way from actually doing this. We'll involve Phillipe if we move forward. Sent from Outlook Mobile<https://aka.ms/qtex0l> On Thu, Apr 7, 2016 at 7:01 AM -0700, "Hector J Rios" <[email protected]<mailto:[email protected]>> wrote: I would go back to Jason's comment and reference eduroam's policy. I personally think that only allowing 5GHz on eduroam goes against the spirit the global availability of eduroam. My 2 cents. Hector Rios Louisiana State University -----Original Message----- From: The EDUCAUSE Wireless Issues Constituent Group Listserv [mailto:[email protected]] On Behalf Of Matthew Newton Sent: Thursday, April 07, 2016 8:54 AM To: [email protected]<mailto:[email protected]> Subject: Re: [WIRELESS-LAN] Turning off 2.4 on a select SSID? On Thu, Apr 07, 2016 at 01:27:04PM +0000, Joseph M. Karam wrote: > We offer 2.4 and 5 GHz service. When we have conflicts, we work with > departments to give them a channel in the 2.4 GHz space, then we take > that channel out of our central infrastructure. > So, for example we gave engineering channel 6 for all of their labs, > and we took that out of our central infrastructure. So far it has > worked well and we can play together nicely What do you do after you've given the last remaining free 2.4Ghz channel to the third department that requests one and you've got none left for yourselves? And presumably Engineering have lots of CCI because all of their APs are on the same frequency? Not critcising, just trying to understand! :) Matthew -- Matthew Newton, Ph.D. <[email protected]<mailto:[email protected]>> Systems Specialist, Infrastructure Services, I.T. Services, University of Leicester, Leicester LE1 7RH, United Kingdom For IT help contact helpdesk extn. 2253, <[email protected]<mailto:[email protected]>> ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/.
