If I might interject, it seems to me that if the elevator is in "full motion" at either end of the shaft, you've got much bigger problems than the status of your wireless link.
Ben (Living in a cartoon world) On Wed, 11 Dec 2002, evilbunny wrote: > Hello Joel, > > As the elevator is slowing down apparently it works fine... It's only > when in full motion... (either end of the shaft, AP is in the foyer) > > -- > Best regards, > evilbunny mailto:[EMAIL PROTECTED] > > http://www.cacert.org - Free Security Certificates > http://www.nodedb.com - Think globally, network locally > http://www.sydneywireless.com - Telecommunications Freedom > > Wednesday, December 11, 2002, 5:43:25 AM, you wrote: > > JJ> On Wed, 11 Dec 2002, evilbunny wrote: > > >> I'm assuming this is on topic and part of the reason/solution to cars > >> and speeds... > >> > >> Also would building lifts be able to do the same thing, as a friend > >> has a problem that he has full signal strength in the lift the entire > >> time, but while it's in full motion he's unable to pass packets... > > JJ> with elevators you get all kinds of problems becuse your ap may have > JJ> enough gain that the signal makes it through all that metal but the card > JJ> may not be powerful enough to do the same going the other way around. > > JJ> most elevators are fairly slow, the fastest one I've been in does around > JJ> 270 meters in 24 seconds, but you don't find those in your average > JJ> building. > > > JJ> joelja > > >> > Today's Random Quote-------------------------------------- The law of gravity says no fair jumping up without coming back down. ----------------------------------------------------------- -- general wireless list, a bawug thing <http://www.bawug.org/> [un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless
